Probe #61acc33619 of Intel D54250WYK H13922-304 Desktop Computer

Log: xorg.log.1

[ 646.242] X.Org X Server 1.20.11 X Protocol Version 11, Revision 0 [ 646.242] Build Operating System: FreeBSD 13.0-RELEASE-p5 amd64 [ 646.243] Current Operating System: FreeBSD XXX 13.0-RELEASE-p4 FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 XXX@XXX:/usr/obj/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX amd64 [ 646.243] Build Date: 13 November 2021 07:49:12AM [ 646.243] [ 646.243] Current version of pixman: 0.40.0 [ 646.243] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 646.243] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 646.243] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 22 06:43:17 2021 [ 646.244] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 646.244] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 646.244] (==) No Layout section. Using the first Screen section. [ 646.244] (==) No screen section available. Using defaults. [ 646.244] (**) |-->Screen "Default Screen Section" (0) [ 646.244] (**) | |-->Monitor "<default monitor>" [ 646.245] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 646.245] (**) | |-->Device "Device0" [ 646.245] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 646.245] (==) Automatically adding devices [ 646.245] (==) Automatically enabling devices [ 646.245] (==) Not automatically adding GPU devices [ 646.245] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 646.245] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, catalogue:/usr/local/etc/X11/fontpath.d [ 646.245] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 646.245] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 646.245] (II) Loader magic: 0x435b20 [ 646.245] (II) Module ABI versions: [ 646.245] X.Org ANSI C Emulation: 0.4 [ 646.245] X.Org Video Driver: 24.1 [ 646.245] X.Org XInput driver : 24.1 [ 646.245] X.Org Server Extension : 10.0 [ 646.246] (--) PCI:*(0@0:2:0) 8086:0a26:8086:2054 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 646.246] (II) LoadModule: "glx" [ 646.246] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 646.248] (II) Module glx: vendor="X.Org Foundation" [ 646.248] compiled for 1.20.11, module version = 1.0.0 [ 646.248] ABI class: X.Org Server Extension, version 10.0 [ 646.248] (==) Matched intel as autoconfigured driver 0 [ 646.248] (==) Matched modesetting as autoconfigured driver 1 [ 646.248] (==) Matched scfb as autoconfigured driver 2 [ 646.248] (==) Matched vesa as autoconfigured driver 3 [ 646.249] (==) Assigned the driver to the xf86ConfigLayout [ 646.249] (II) LoadModule: "intel" [ 646.249] (WW) Warning, couldn't open module intel [ 646.249] (EE) Failed to load module "intel" (module does not exist, 0) [ 646.249] (II) LoadModule: "modesetting" [ 646.249] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 646.249] (II) Module modesetting: vendor="X.Org Foundation" [ 646.249] compiled for 1.20.11, module version = 1.20.11 [ 646.250] Module class: X.Org Video Driver [ 646.250] ABI class: X.Org Video Driver, version 24.1 [ 646.250] (II) LoadModule: "scfb" [ 646.250] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 646.250] (II) Module scfb: vendor="X.Org Foundation" [ 646.250] compiled for 1.20.11, module version = 0.0.5 [ 646.250] ABI class: X.Org Video Driver, version 24.1 [ 646.250] (II) LoadModule: "vesa" [ 646.250] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 646.250] (II) Module vesa: vendor="X.Org Foundation" [ 646.250] compiled for 1.20.11, module version = 2.5.0 [ 646.250] Module class: X.Org Video Driver [ 646.251] ABI class: X.Org Video Driver, version 24.1 [ 646.251] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 646.251] (II) scfb: driver for wsdisplay framebuffer: scfb [ 646.251] (II) VESA: driver for VESA chipsets: vesa [ 646.251] (--) Using syscons driver with X support (version 2.0) [ 646.251] (--) using VT number 9 [ 646.627] (**) modeset(0): claimed PCI slot XXX@XXX:2:0 [ 646.627] (II) modeset(0): using default device [ 646.627] (WW) Falling back to old probe method for scfb [ 646.627] scfb trace: probe start [ 646.627] scfb trace: probe done [ 646.627] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 646.627] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 646.627] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 646.627] (**) modeset(0): Option "SWcursor" "on" [ 646.627] (==) modeset(0): RGB weight 888 [ 646.627] (==) modeset(0): Default visual is TrueColor [ 646.627] (II) Loading sub module "glamoregl" [ 646.627] (II) LoadModule: "glamoregl" [ 646.627] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so [ 646.634] (II) Module glamoregl: vendor="X.Org Foundation" [ 646.634] compiled for 1.20.11, module version = 1.0.1 [ 646.634] ABI class: X.Org ANSI C Emulation, version 0.4 [ 646.652] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 5000 (HSW GT3) [ 646.652] (II) modeset(0): glamor initialized [ 646.678] (II) modeset(0): Output HDMI-1 has no monitor section [ 646.678] (II) modeset(0): Output DP-1 has no monitor section [ 646.680] (II) modeset(0): Output HDMI-2 has no monitor section [ 646.706] (II) modeset(0): EDID for output HDMI-1 [ 646.706] (II) modeset(0): Manufacturer: HEC Model: 30 Serial#: ... [ 646.706] (II) modeset(0): Year: 2019 Week: 12 [ 646.706] (II) modeset(0): EDID Version: 1.3 [ 646.706] (II) modeset(0): Digital Display Input [ 646.706] (II) modeset(0): Max Image Size [cm]: horiz.: 115 vert.: 65 [ 646.706] (II) modeset(0): Gamma: 2.20 [ 646.706] (II) modeset(0): No DPMS capabilities specified [ 646.706] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 646.706] (II) modeset(0): First detailed timing is preferred mode [ 646.706] (II) modeset(0): redX: 0.640 redY: 0.340 greenX: 0.300 greenY: 0.690 [ 646.706] (II) modeset(0): blueX: 0.138 blueY: 0.038 whiteX: 0.282 whiteY: 0.297 [ 646.706] (II) modeset(0): Supported established timings: [ 646.706] (II) modeset(0): 640x480@60Hz [ 646.706] (II) modeset(0): 800x600@60Hz [ 646.706] (II) modeset(0): 1024x768@60Hz [ 646.706] (II) modeset(0): Manufacturer's mask: 0 [ 646.706] (II) modeset(0): Supported standard timings: [ 646.706] (II) modeset(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 646.706] (II) modeset(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 646.706] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 646.706] (II) modeset(0): Supported detailed timing: [ 646.706] (II) modeset(0): clock: 594.0 MHz Image Size: 698 x 392 mm [ 646.706] (II) modeset(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 h_blank_end 4400 h_border: 0 [ 646.706] (II) modeset(0): v_active: 2160 v_sync: 2168 v_sync_end 2178 v_blanking: 2250 v_border: 0 [ 646.706] (II) modeset(0): Supported detailed timing: [ 646.706] (II) modeset(0): clock: 148.5 MHz Image Size: 1872 x 1053 mm [ 646.706] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 646.706] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 646.706] (II) modeset(0): Monitor name: HISENSE [ 646.706] (II) modeset(0): Ranges: V min: 24 V max: 75 Hz, H min: 15 H max: 136 kHz, PixClock max 605 MHz [ 646.706] (II) modeset(0): Number of EDID sections to follow: 1 [ 646.706] (II) modeset(0): EDID (in hex): [ 646.706] (II) modeset(0): 00ffffffffffff0020a3300001000000 [ 646.706] (II) modeset(0): 0c1d0103807341780acf74a3574cb023 [ 646.706] (II) modeset(0): 09484c21080081c08140818001010101 [ 646.706] (II) modeset(0): 01010101010108e80030f2705a80b058 [ 646.706] (II) modeset(0): 8a00ba882100001e023a801871382d40 [ 646.706] (II) modeset(0): 582c4500501d7400001e000000fc0048 [ 646.706] (II) modeset(0): 4953454e53450a2020202020000000fd [ 646.706] (II) modeset(0): 00184b0f883c000a202020202020012c [ 646.706] (II) modeset(0): 020377705a615e5f605d6a6b01020405 [ 646.706] (II) modeset(0): 101113141f2021221203656662636432 [ 646.706] (II) modeset(0): 0907071507505706013d07c06704035f [ 646.706] (II) modeset(0): 7e0183010000e200f9e305ff016e030c [ 646.706] (II) modeset(0): 001000383c2000800102030468d85dc4 [ 646.706] (II) modeset(0): 0178800702e61146d0007080e3060d01 [ 646.706] (II) modeset(0): eb0146d0004423727e6a6f84e5018b84 [ 646.706] (II) modeset(0): 9001e40f690060000000000000000087 [ 646.706] (--) modeset(0): HDMI max TMDS frequency 300000KHz [ 646.706] (II) modeset(0): Printing probed modes for output HDMI-1 [ 646.706] (II) modeset(0): Modeline "4096x2160"x30.0 297.00 4096 4184 4272 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz e) [ 646.706] (II) modeset(0): Modeline "4096x2160"x25.0 297.00 4096 5064 5152 5280 2160 2168 2178 2250 +hsync +vsync (56.2 kHz e) [ 646.706] (II) modeset(0): Modeline "4096x2160"x24.0 297.00 4096 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (54.0 kHz e) [ 646.706] (II) modeset(0): Modeline "4096x2160"x30.0 296.70 4096 4184 4272 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e) [ 646.706] (II) modeset(0): Modeline "4096x2160"x24.0 296.70 4096 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (53.9 kHz e) [ 646.706] (II) modeset(0): Modeline "3840x2160"x30.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz e) [ 646.706] (II) modeset(0): Modeline "3840x2160"x25.0 297.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (56.2 kHz e) [ 646.706] (II) modeset(0): Modeline "3840x2160"x24.0 297.00 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (54.0 kHz e) [ 646.706] (II) modeset(0): Modeline "3840x2160"x30.0 296.70 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e) [ 646.706] (II) modeset(0): Modeline "3840x2160"x24.0 296.70 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (53.9 kHz e) [ 646.706] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 646.706] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 646.706] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 646.706] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 646.706] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 646.706] (II) modeset(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 646.707] (II) modeset(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 646.707] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 646.707] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e) [ 646.707] (II) modeset(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e) [ 646.707] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 646.707] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 646.707] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 646.707] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 646.707] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 646.707] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 646.707] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 646.707] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 646.707] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 646.707] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 646.707] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 646.707] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 646.707] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 646.707] (II) modeset(0): EDID for output DP-1 [ 646.708] (II) modeset(0): EDID for output HDMI-2 [ 646.708] (II) modeset(0): Output HDMI-1 connected [ 646.708] (II) modeset(0): Output DP-1 disconnected [ 646.708] (II) modeset(0): Output HDMI-2 disconnected [ 646.708] (II) modeset(0): Using exact sizes for initial modes [ 646.708] (II) modeset(0): Output HDMI-1 using initial mode 3840x2160 +0+0 [ 646.708] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 646.708] (==) modeset(0): DPI set to (96, 96) [ 646.708] (II) Loading sub module "fb" [ 646.708] (II) LoadModule: "fb" [ 646.708] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 646.708] (II) Module fb: vendor="X.Org Foundation" [ 646.708] compiled for 1.20.11, module version = 1.0.0 [ 646.708] ABI class: X.Org ANSI C Emulation, version 0.4 [ 646.708] (II) UnloadModule: "scfb" [ 646.708] (II) Unloading scfb [ 646.708] (II) UnloadModule: "vesa" [ 646.708] (II) Unloading vesa [ 646.799] (==) modeset(0): Backing store enabled [ 646.799] (==) modeset(0): Silken mouse enabled [ 647.027] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 647.027] (==) modeset(0): DPMS enabled [ 647.027] (II) modeset(0): [DRI2] Setup complete [ 647.027] (II) modeset(0): [DRI2] DRI driver: i965 [ 647.027] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 647.027] (II) Initializing extension Generic Event Extension [ 647.027] (II) Initializing extension SHAPE [ 647.027] (II) Initializing extension MIT-SHM [ 647.028] (II) Initializing extension XInputExtension [ 647.028] (II) Initializing extension XTEST [ 647.028] (II) Initializing extension BIG-REQUESTS [ 647.029] (II) Initializing extension SYNC [ 647.029] (II) Initializing extension XKEYBOARD [ 647.029] (II) Initializing extension XC-MISC [ 647.029] (II) Initializing extension SECURITY [ 647.029] (II) Initializing extension XFIXES [ 647.030] (II) Initializing extension RENDER [ 647.030] (II) Initializing extension RANDR [ 647.030] (II) Initializing extension COMPOSITE [ 647.031] (II) Initializing extension DAMAGE [ 647.031] (II) Initializing extension MIT-SCREEN-SAVER [ 647.031] (II) Initializing extension DOUBLE-BUFFER [ 647.031] (II) Initializing extension RECORD [ 647.032] (II) Initializing extension DPMS [ 647.032] (II) Initializing extension Present [ 647.032] (II) Initializing extension DRI3 [ 647.032] (II) Initializing extension X-Resource [ 647.033] (II) Initializing extension XVideo [ 647.033] (II) Initializing extension XVideo-MotionCompensation [ 647.033] (II) Initializing extension GLX [ 647.039] (II) AIGLX: Loaded and initialized i965 [ 647.039] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 647.039] (II) Initializing extension XFree86-VidModeExtension [ 647.039] (II) Initializing extension XFree86-DGA [ 647.040] (II) Initializing extension XFree86-DRI [ 647.040] (II) Initializing extension DRI2 [ 647.040] (II) modeset(0): Damage tracking initialized [ 647.040] (II) modeset(0): Setting screen physical size to 1016 x 571 [ 647.119] (II) config/udev: Adding input device System mouse (/dev/input/event0) [ 647.119] (**) System mouse: Applying InputClass "libinput pointer catchall" [ 647.119] (II) LoadModule: "libinput" [ 647.119] (II) Loading /usr/local/lib/xorg/modules/input/libinput_drv.so [ 647.121] (II) Module libinput: vendor="X.Org Foundation" [ 647.121] compiled for 1.20.11, module version = 0.30.0 [ 647.121] Module class: X.Org XInput Driver [ 647.121] ABI class: X.Org XInput driver, version 24.1 [ 647.121] (II) Using input driver 'libinput' for 'System mouse' [ 647.121] (**) System mouse: always reports core events [ 647.121] (**) Option "Device" "/dev/input/event0" [ 647.121] (**) Option "_source" "server/udev" [ 647.123] (II) event0 - System mouse: is tagged by udev as: Mouse [ 647.123] (II) event0 - System mouse: device is a pointer [ 647.123] (II) event0 - System mouse: device removed [ 647.123] (**) Option "config_info" "udev:/dev/input/event0" [ 647.123] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 6) [ 647.123] (**) Option "AccelerationScheme" "none" [ 647.123] (**) System mouse: (accel) selected scheme none/0 [ 647.123] (**) System mouse: (accel) acceleration factor: 2.000 [ 647.123] (**) System mouse: (accel) acceleration threshold: 4 [ 647.124] (II) event0 - System mouse: is tagged by udev as: Mouse [ 647.124] (II) event0 - System mouse: device is a pointer [ 647.124] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event1) [ 647.124] (**) System keyboard multiplexer: Applying InputClass "Evdev keyboard" [ 647.124] (**) System keyboard multiplexer: Applying InputClass "libinput keyboard catchall" [ 647.124] (II) Using input driver 'libinput' for 'System keyboard multiplexer' [ 647.124] (**) System keyboard multiplexer: always reports core events [ 647.124] (**) Option "Device" "/dev/input/event1" [ 647.124] (**) Option "_source" "server/udev" [ 647.125] (II) event1 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 647.125] (II) event1 - System keyboard multiplexer: device is a keyboard [ 647.126] (II) event1 - System keyboard multiplexer: device removed [ 647.126] (**) Option "config_info" "udev:/dev/input/event1" [ 647.126] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 7) [ 647.126] (**) Option "xkb_rules" "evdev" [ 647.158] (II) event1 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 647.158] (II) event1 - System keyboard multiplexer: device is a keyboard [ 647.158] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 647.158] (**) Power Button: Applying InputClass "Evdev keyboard" [ 647.158] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 647.158] (II) Using input driver 'libinput' for 'Power Button' [ 647.158] (**) Power Button: always reports core events [ 647.158] (**) Option "Device" "/dev/input/event2" [ 647.158] (**) Option "_source" "server/udev" [ 647.159] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 647.159] (II) event2 - Power Button: device is a keyboard [ 647.159] (II) event2 - Power Button: device removed [ 647.159] (**) Option "config_info" "udev:/dev/input/event2" [ 647.159] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 647.159] (**) Option "xkb_rules" "evdev" [ 647.160] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 647.160] (II) event2 - Power Button: device is a keyboard [ 647.160] (II) config/udev: Adding input device Chicony PFU-65 USB Keyboard (/dev/input/event3) [ 647.160] (**) Chicony PFU-65 USB Keyboard: Applying InputClass "Evdev keyboard" [ 647.160] (**) Chicony PFU-65 USB Keyboard: Applying InputClass "libinput keyboard catchall" [ 647.160] (II) Using input driver 'libinput' for 'Chicony PFU-65 USB Keyboard' [ 647.160] (**) Chicony PFU-65 USB Keyboard: always reports core events [ 647.160] (**) Option "Device" "/dev/input/event3" [ 647.160] (**) Option "_source" "server/udev" [ 647.161] (II) event3 - Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 4: is tagged by udev as: Keyboard [ 647.161] (II) event3 - Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 4: device is a keyboard [ 647.161] (II) event3 - Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 4: device removed [ 647.161] (**) Option "config_info" "udev:/dev/input/event3" [ 647.161] (II) XINPUT: Adding extended input device "Chicony PFU-65 USB Keyboard" (type: KEYBOARD, id 9) [ 647.161] (**) Option "xkb_rules" "evdev" [ 647.162] (II) event3 - Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 4: is tagged by udev as: Keyboard [ 647.162] (II) event3 - Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 4: device is a keyboard [ 647.163] (II) config/udev: Adding input device SEMICCHIP Usb Mouse (/dev/input/event4) [ 647.163] (**) SEMICCHIP Usb Mouse: Applying InputClass "libinput pointer catchall" [ 647.163] (II) Using input driver 'libinput' for 'SEMICCHIP Usb Mouse' [ 647.163] (**) SEMICCHIP Usb Mouse: always reports core events [ 647.163] (**) Option "Device" "/dev/input/event4" [ 647.163] (**) Option "_source" "server/udev" [ 647.164] (II) event4 - SEMICCHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 7: is tagged by udev as: Mouse [ 647.164] (II) event4 - SEMICCHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 7: device is a pointer [ 647.164] (II) event4 - SEMICCHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 7: device removed [ 647.164] (**) Option "config_info" "udev:/dev/input/event4" [ 647.164] (II) XINPUT: Adding extended input device "SEMICCHIP Usb Mouse" (type: MOUSE, id 10) [ 647.164] (**) Option "AccelerationScheme" "none" [ 647.164] (**) SEMICCHIP Usb Mouse: (accel) selected scheme none/0 [ 647.164] (**) SEMICCHIP Usb Mouse: (accel) acceleration factor: 2.000 [ 647.164] (**) SEMICCHIP Usb Mouse: (accel) acceleration threshold: 4 [ 647.165] (II) event4 - SEMICCHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 7: is tagged by udev as: Mouse [ 647.165] (II) event4 - SEMICCHIP Usb Mouse, class 0/0, rev 1.10/1.10, addr 7: device is a pointer [ 647.165] (II) config/udev: Adding input device Pulse-Eight CEC Adapter (/dev/input/event5) [ 647.165] (**) Pulse-Eight CEC Adapter: Applying InputClass "libinput pointer catchall" [ 647.165] (II) Using input driver 'libinput' for 'Pulse-Eight CEC Adapter' [ 647.165] (**) Pulse-Eight CEC Adapter: always reports core events [ 647.165] (**) Option "Device" "/dev/input/event5" [ 647.165] (**) Option "_source" "server/udev" [ 647.166] (II) event5 - Pulse-Eight CEC Adapter, class 239/2, rev 1.10/10.00, addr 2: is tagged by udev as: Mouse [ 647.166] (II) event5 - Pulse-Eight CEC Adapter, class 239/2, rev 1.10/10.00, addr 2: device is a pointer [ 647.167] (II) event5 - Pulse-Eight CEC Adapter, class 239/2, rev 1.10/10.00, addr 2: device removed [ 647.167] (**) Option "config_info" "udev:/dev/input/event5" [ 647.167] (II) XINPUT: Adding extended input device "Pulse-Eight CEC Adapter" (type: MOUSE, id 11) [ 647.167] (**) Option "AccelerationScheme" "none" [ 647.167] (**) Pulse-Eight CEC Adapter: (accel) selected scheme none/0 [ 647.167] (**) Pulse-Eight CEC Adapter: (accel) acceleration factor: 2.000 [ 647.167] (**) Pulse-Eight CEC Adapter: (accel) acceleration threshold: 4 [ 647.168] (II) event5 - Pulse-Eight CEC Adapter, class 239/2, rev 1.10/10.00, addr 2: is tagged by udev as: Mouse [ 647.168] (II) event5 - Pulse-Eight CEC Adapter, class 239/2, rev 1.10/10.00, addr 2: device is a pointer [ 647.545] (II) modeset(0): EDID vendor "HEC", prod id 48 [ 647.546] (II) modeset(0): Using EDID range info for horizontal sync [ 647.546] (II) modeset(0): Using EDID range info for vertical refresh [ 647.546] (II) modeset(0): Printing DDC gathered Modelines: [ 647.546] (II) modeset(0): Modeline "3840x2160"x0.0 594.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (135.0 kHz eP) [ 647.546] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 647.546] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 647.546] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 647.546] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 647.546] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 647.546] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 647.546] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 647.546] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 647.546] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 647.546] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 647.546] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 647.546] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 647.546] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 647.546] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 647.546] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 647.546] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 647.546] (--) modeset(0): HDMI max TMDS frequency 300000KHz


Hardware for Linux and BSD

GitHub