[ 34.344] X.Org X Server 1.21.1.14 X Protocol Version 11, Revision 0 [ 34.348] Current Operating System: FreeBSD XXX 14.2-RELEASE-p1 FreeBSD 14.2-RELEASE-p1 GENERIC amd64 [ 34.349] [ 34.350] Current version of pixman: 0.44.2 [ 34.351] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 34.352] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 34.358] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 14 21:08:29 2025 [ 34.361] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 34.363] (==) No Layout section. Using the first Screen section. [ 34.364] (==) No screen section available. Using defaults. [ 34.365] (**) |-->Screen "Default Screen Section" (0) [ 34.366] (**) | |-->Monitor "<default monitor>" [ 34.368] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 34.369] (**) Allowing byte-swapped clients [ 34.370] (==) Automatically adding devices [ 34.371] (==) Automatically enabling devices [ 34.371] (==) Automatically adding GPU devices [ 34.372] (==) Automatically binding GPU devices [ 34.374] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 34.380] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, catalogue:/usr/local/etc/X11/fontpath.d [ 34.381] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 34.382] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.383] (II) Module ABI versions: [ 34.384] X.Org ANSI C Emulation: 0.4 [ 34.385] X.Org Video Driver: 25.2 [ 34.386] X.Org XInput driver : 24.4 [ 34.387] X.Org Server Extension : 10.0 [ 34.391] (II) xfree86: Adding drm device (/dev/dri/card0) [ 34.392] (II) Platform probe for /dev/dri/card0 [ 34.407] (--) PCI:*(0@0:2:0) 8086:5912:103c:829e rev 4, Mem @ 0x1ff0000000/16777216, 0x1fe0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/65536 [ 34.412] (II) LoadModule: "glx" [ 34.415] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 34.425] (II) Module glx: vendor="X.Org Foundation" [ 34.426] compiled for 1.21.1.14, module version = 1.0.0 [ 34.429] ABI class: X.Org Server Extension, version 10.0 [ 34.430] (==) Matched intel as autoconfigured driver 0 [ 34.431] (==) Matched modesetting as autoconfigured driver 1 [ 34.432] (==) Matched scfb as autoconfigured driver 2 [ 34.433] (==) Matched vesa as autoconfigured driver 3 [ 34.434] (==) Assigned the driver to the xf86ConfigLayout [ 34.435] (II) LoadModule: "intel" [ 34.437] (WW) Warning, couldn't open module intel [ 34.438] (EE) Failed to load module "intel" (module does not exist, 0) [ 34.439] (II) LoadModule: "modesetting" [ 34.441] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 34.445] (II) Module modesetting: vendor="X.Org Foundation" [ 34.446] compiled for 1.21.1.14, module version = 1.21.1 [ 34.448] Module class: X.Org Video Driver [ 34.449] ABI class: X.Org Video Driver, version 25.2 [ 34.450] (II) LoadModule: "scfb" [ 34.451] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 34.453] (II) Module scfb: vendor="X.Org Foundation" [ 34.454] compiled for 1.21.1.14, module version = 0.0.5 [ 34.456] ABI class: X.Org Video Driver, version 25.2 [ 34.457] (II) LoadModule: "vesa" [ 34.458] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 34.459] (II) Module vesa: vendor="X.Org Foundation" [ 34.461] compiled for 1.21.1.14, module version = 2.5.0 [ 34.463] Module class: X.Org Video Driver [ 34.464] ABI class: X.Org Video Driver, version 25.2 [ 34.465] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 34.468] (II) scfb: driver for wsdisplay framebuffer: scfb [ 34.471] (II) VESA: driver for VESA chipsets: vesa [ 34.473] (--) Using syscons driver with X support (version 2.0) [ 34.475] (--) using VT number 9 [ 34.507] (II) modeset(0): using drv /dev/dri/card0 [ 34.508] (WW) Falling back to old probe method for scfb [ 34.509] scfb trace: probe start [ 34.510] scfb trace: probe done [ 34.512] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 34.513] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 34.514] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 34.516] (==) modeset(0): RGB weight 888 [ 34.517] (==) modeset(0): Default visual is TrueColor [ 34.518] (II) Loading sub module "glamoregl" [ 34.519] (II) LoadModule: "glamoregl" [ 34.521] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so [ 34.535] (II) Module glamoregl: vendor="X.Org Foundation" [ 34.536] compiled for 1.21.1.14, module version = 1.0.1 [ 34.538] ABI class: X.Org ANSI C Emulation, version 0.4 [ 34.935] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 630 (KBL GT2) [ 34.936] (II) modeset(0): glamor initialized [ 34.937] (==) modeset(0): VariableRefresh: disabled [ 34.938] (==) modeset(0): AsyncFlipSecondaries: disabled [ 34.939] (II) modeset(0): Output DP-1 has no monitor section [ 34.945] (II) modeset(0): Output HDMI-1 has no monitor section [ 34.946] (II) modeset(0): Output DP-2 has no monitor section [ 34.951] (II) modeset(0): Output HDMI-2 has no monitor section [ 34.965] (II) modeset(0): Output DP-3 has no monitor section [ 34.970] (II) modeset(0): Output HDMI-3 has no monitor section [ 34.971] (II) modeset(0): EDID for output DP-1 [ 34.976] (II) modeset(0): EDID for output HDMI-1 [ 34.977] (II) modeset(0): EDID for output DP-2 [ 34.982] (II) modeset(0): EDID for output HDMI-2 [ 34.996] (II) modeset(0): EDID for output DP-3 [ 34.997] (II) modeset(0): Manufacturer: SAM Model: 286 Serial#: ... [ 34.998] (II) modeset(0): Year: 2008 Week: 7 [ 34.999] (II) modeset(0): EDID Version: 1.4 [ 35.000] (II) modeset(0): Digital Display Input [ 35.001] (II) modeset(0): 8 bits per channel [ 35.002] (II) modeset(0): Digital interface is DisplayPort [ 35.003] (II) modeset(0): Max Image Size [cm]: horiz.: 37 vert.: 21 [ 35.004] (II) modeset(0): Gamma: 2.20 [ 35.005] (II) modeset(0): DPMS capabilities: Off [ 35.007] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 35.008] (II) modeset(0): First detailed timing is preferred mode [ 35.009] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 35.010] (II) modeset(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 35.012] (II) modeset(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329 [ 35.013] (II) modeset(0): Supported established timings: [ 35.014] (II) modeset(0): 720x400@70Hz [ 35.015] (II) modeset(0): 640x480@60Hz [ 35.016] (II) modeset(0): 640x480@67Hz [ 35.017] (II) modeset(0): 640x480@72Hz [ 35.018] (II) modeset(0): 640x480@75Hz [ 35.019] (II) modeset(0): 800x600@56Hz [ 35.020] (II) modeset(0): 800x600@60Hz [ 35.021] (II) modeset(0): 800x600@72Hz [ 35.022] (II) modeset(0): 800x600@75Hz [ 35.023] (II) modeset(0): 832x624@75Hz [ 35.024] (II) modeset(0): 1024x768@60Hz [ 35.025] (II) modeset(0): 1024x768@70Hz [ 35.026] (II) modeset(0): 1024x768@75Hz [ 35.027] (II) modeset(0): Manufacturer's mask: 0 [ 35.028] (II) modeset(0): Supported detailed timing: [ 35.029] (II) modeset(0): clock: 74.5 MHz Image Size: 372 x 209 mm [ 35.030] (II) modeset(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0 [ 35.032] (II) modeset(0): v_active: 720 v_sync: 723 v_sync_end 728 v_blanking: 748 v_border: 0 [ 35.033] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 85 MHz [ 35.035] (II) modeset(0): Monitor name: SyncMaster [ 35.036] (II) modeset(0): Serial No: HVBQ213217 [ 35.037] (II) modeset(0): EDID (in hex): [ 35.038] (II) modeset(0): 00ffffffffffff004c2d860237314148 [ 35.039] (II) modeset(0): 07120104a525157822aea5a6544c9926 [ 35.040] (II) modeset(0): 145054bfee0001010101010101010101 [ 35.041] (II) modeset(0): 0101010101011a1d008051d01c204080 [ 35.042] (II) modeset(0): 350074d11000001c000000fd00384b1e [ 35.043] (II) modeset(0): 3d08000a202020202020000000fc0053 [ 35.044] (II) modeset(0): 796e634d61737465720a2020000000ff [ 35.045] (II) modeset(0): 00485642513231333231370a20200090 [ 35.046] (II) modeset(0): Printing probed modes for output DP-3 [ 35.047] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 35.048] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 35.049] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 35.050] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 35.051] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 35.052] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 35.053] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 35.054] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 35.055] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 35.056] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 35.057] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 35.058] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 35.059] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 35.060] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 35.065] (II) modeset(0): EDID for output HDMI-3 [ 35.066] (II) modeset(0): Output DP-1 disconnected [ 35.067] (II) modeset(0): Output HDMI-1 disconnected [ 35.068] (II) modeset(0): Output DP-2 disconnected [ 35.069] (II) modeset(0): Output HDMI-2 disconnected [ 35.070] (II) modeset(0): Output DP-3 connected [ 35.071] (II) modeset(0): Output HDMI-3 disconnected [ 35.072] (II) modeset(0): Using exact sizes for initial modes [ 35.073] (II) modeset(0): Output DP-3 using initial mode 1280x720 +0+0 [ 35.074] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 35.075] (==) modeset(0): DPI set to (96, 96) [ 35.076] (II) Loading sub module "fb" [ 35.077] (II) LoadModule: "fb" [ 35.078] (II) Module "fb" already built-in [ 35.079] (II) UnloadModule: "scfb" [ 35.081] (II) Unloading scfb [ 35.083] (II) UnloadModule: "vesa" [ 35.085] (II) Unloading vesa [ 35.177] (==) modeset(0): Backing store enabled [ 35.178] (==) modeset(0): Silken mouse enabled [ 35.259] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 35.260] (==) modeset(0): DPMS enabled [ 35.262] (II) modeset(0): [DRI2] Setup complete [ 35.263] (II) modeset(0): [DRI2] DRI driver: iris [ 35.264] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 35.265] (II) Initializing extension Generic Event Extension [ 35.266] (II) Initializing extension SHAPE [ 35.267] (II) Initializing extension MIT-SHM [ 35.268] (II) Initializing extension XInputExtension [ 35.270] (II) Initializing extension XTEST [ 35.271] (II) Initializing extension BIG-REQUESTS [ 35.272] (II) Initializing extension SYNC [ 35.273] (II) Initializing extension XKEYBOARD [ 35.275] (II) Initializing extension XC-MISC [ 35.276] (II) Initializing extension SECURITY [ 35.277] (II) Initializing extension XFIXES [ 35.278] (II) Initializing extension RENDER [ 35.280] (II) Initializing extension RANDR [ 35.281] (II) Initializing extension COMPOSITE [ 35.282] (II) Initializing extension DAMAGE [ 35.283] (II) Initializing extension MIT-SCREEN-SAVER [ 35.284] (II) Initializing extension DOUBLE-BUFFER [ 35.285] (II) Initializing extension RECORD [ 35.287] (II) Initializing extension DPMS [ 35.288] (II) Initializing extension Present [ 35.289] (II) Initializing extension DRI3 [ 35.290] (II) Initializing extension X-Resource [ 35.291] (II) Initializing extension XVideo [ 35.292] (II) Initializing extension XVideo-MotionCompensation [ 35.293] (II) Initializing extension GLX [ 35.299] (II) AIGLX: Loaded and initialized iris [ 35.300] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 35.301] (II) Initializing extension XFree86-VidModeExtension [ 35.302] (II) Initializing extension XFree86-DGA [ 35.303] (II) Initializing extension XFree86-DRI [ 35.304] (II) Initializing extension DRI2 [ 35.307] (II) modeset(0): Damage tracking initialized [ 35.308] (II) modeset(0): Setting screen physical size to 338 x 190 [ 35.382] (II) config/udev: Adding input device System keyboard multiplexer (/dev/input/event0) [ 35.384] (**) System keyboard multiplexer: Applying InputClass "Evdev keyboard" [ 35.384] (**) System keyboard multiplexer: Applying InputClass "libinput keyboard catchall" [ 35.385] (II) LoadModule: "libinput" [ 35.387] (II) Loading /usr/local/lib/xorg/modules/input/libinput_drv.so [ 35.403] (II) Module libinput: vendor="X.Org Foundation" [ 35.404] compiled for 1.21.1.14, module version = 1.3.0 [ 35.406] Module class: X.Org XInput Driver [ 35.407] ABI class: X.Org XInput driver, version 24.4 [ 35.408] (II) Using input driver 'libinput' for 'System keyboard multiplexer' [ 35.409] (**) System keyboard multiplexer: always reports core events [ 35.410] (**) Option "Device" "/dev/input/event0" [ 35.421] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 35.422] (II) event0 - System keyboard multiplexer: device is a keyboard [ 35.425] (II) event0 - System keyboard multiplexer: device removed [ 35.426] (**) Option "config_info" "udev:/dev/input/event0" [ 35.428] (II) XINPUT: Adding extended input device "System keyboard multiplexer" (type: KEYBOARD, id 6) [ 35.429] (**) Option "xkb_rules" "evdev" [ 35.463] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 35.464] (II) event0 - System keyboard multiplexer: device is a keyboard [ 35.467] (II) config/udev: Adding input device System mouse (/dev/input/event1) [ 35.468] (**) System mouse: Applying InputClass "libinput pointer catchall" [ 35.469] (II) Using input driver 'libinput' for 'System mouse' [ 35.470] (**) System mouse: always reports core events [ 35.471] (**) Option "Device" "/dev/input/event1" [ 35.474] (II) event1 - System mouse: is tagged by udev as: Mouse [ 35.475] (II) event1 - System mouse: device is a pointer [ 35.477] (II) event1 - System mouse: device removed [ 35.478] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 35.479] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 35.480] (II) libinput: System mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 35.481] (**) Option "config_info" "udev:/dev/input/event1" [ 35.483] (II) XINPUT: Adding extended input device "System mouse" (type: MOUSE, id 7) [ 35.484] (**) Option "AccelerationScheme" "none" [ 35.486] (**) System mouse: (accel) selected scheme none/0 [ 35.487] (**) System mouse: (accel) acceleration factor: 2.000 [ 35.488] (**) System mouse: (accel) acceleration threshold: 4 [ 35.490] (II) event1 - System mouse: is tagged by udev as: Mouse [ 35.492] (II) event1 - System mouse: device is a pointer [ 35.494] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 35.495] (**) Sleep Button: Applying InputClass "Evdev keyboard" [ 35.496] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 35.497] (II) Using input driver 'libinput' for 'Sleep Button' [ 35.498] (**) Sleep Button: always reports core events [ 35.499] (**) Option "Device" "/dev/input/event2" [ 35.502] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 35.503] (II) event2 - Sleep Button: device is a keyboard [ 35.505] (II) event2 - Sleep Button: device removed [ 35.506] (**) Option "config_info" "udev:/dev/input/event2" [ 35.508] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 35.509] (**) Option "xkb_rules" "evdev" [ 35.512] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 35.514] (II) event2 - Sleep Button: device is a keyboard [ 35.516] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 35.517] (**) Power Button: Applying InputClass "Evdev keyboard" [ 35.518] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 35.519] (II) Using input driver 'libinput' for 'Power Button' [ 35.519] (**) Power Button: always reports core events [ 35.520] (**) Option "Device" "/dev/input/event3" [ 35.524] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 35.525] (II) event3 - Power Button: device is a keyboard [ 35.527] (II) event3 - Power Button: device removed [ 35.528] (**) Option "config_info" "udev:/dev/input/event3" [ 35.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 35.531] (**) Option "xkb_rules" "evdev" [ 35.534] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 35.535] (II) event3 - Power Button: device is a keyboard [ 35.537] (II) config/udev: Adding input device AT keyboard (/dev/input/event4) [ 35.538] (**) AT keyboard: Applying InputClass "Evdev keyboard" [ 35.539] (**) AT keyboard: Applying InputClass "libinput keyboard catchall" [ 35.540] (II) Using input driver 'libinput' for 'AT keyboard' [ 35.541] (**) AT keyboard: always reports core events [ 35.542] (**) Option "Device" "/dev/input/event4" [ 35.545] (II) event4 - AT keyboard: is tagged by udev as: Keyboard [ 35.547] (II) event4 - AT keyboard: device is a keyboard [ 35.550] (II) event4 - AT keyboard: device removed [ 35.551] (**) Option "config_info" "udev:/dev/input/event4" [ 35.553] (II) XINPUT: Adding extended input device "AT keyboard" (type: KEYBOARD, id 10) [ 35.554] (**) Option "xkb_rules" "evdev" [ 35.557] (II) event4 - AT keyboard: is tagged by udev as: Keyboard [ 35.559] (II) event4 - AT keyboard: device is a keyboard [ 35.563] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event5) [ 35.564] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "Evdev keyboard" [ 35.564] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "libinput keyboard catchall" [ 35.565] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 2000' [ 35.566] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events [ 35.567] (**) Option "Device" "/dev/input/event5" [ 35.571] (II) event5 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 35.572] (II) event5 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 35.575] (II) event5 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 35.576] (**) Option "config_info" "udev:/dev/input/event5" [ 35.578] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 11) [ 35.579] (**) Option "xkb_rules" "evdev" [ 35.582] (II) event5 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 35.583] (II) event5 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 35.586] (II) config/udev: Adding input device Wacom Co. (/dev/input/event6) [ 35.587] (**) Wacom Co.: Applying InputClass "libinput pointer catchall" [ 35.588] (II) Using input driver 'libinput' for 'Wacom Co.' [ 35.589] (**) Wacom Co.: always reports core events [ 35.590] (**) Option "Device" "/dev/input/event6" [ 35.593] (II) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 35.595] (II) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 35.597] (II) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 35.598] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 35.599] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 35.600] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 35.601] (**) Option "config_info" "udev:/dev/input/event6" [ 35.603] (II) XINPUT: Adding extended input device "Wacom Co." (type: MOUSE, id 12) [ 35.604] (**) Option "AccelerationScheme" "none" [ 35.606] (**) Wacom Co.: (accel) selected scheme none/0 [ 35.608] (**) Wacom Co.: (accel) acceleration factor: 2.000 [ 35.609] (**) Wacom Co.: (accel) acceleration threshold: 4 [ 35.611] (II) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 35.613] (II) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 36.584] (EE) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: client bug: event processing lagging behind by 25ms, your system is too slow [ 36.796] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 36.797] (II) modeset(0): Using EDID range info for horizontal sync [ 36.799] (II) modeset(0): Using EDID range info for vertical refresh [ 36.800] (II) modeset(0): Printing DDC gathered Modelines: [ 36.802] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 36.803] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 36.804] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 36.807] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 36.808] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 36.809] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 36.811] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 36.812] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 36.814] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 36.815] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 36.817] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 36.818] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 36.820] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 36.821] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 37.297] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 37.298] (II) modeset(0): Using hsync ranges from config file [ 37.299] (II) modeset(0): Using vrefresh ranges from config file [ 37.300] (II) modeset(0): Printing DDC gathered Modelines: [ 37.301] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 37.302] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 37.303] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 37.304] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 37.305] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 37.307] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 37.308] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 37.311] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 37.312] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 37.314] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 37.315] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 37.317] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 37.318] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 37.319] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 61.773] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 61.774] (II) modeset(0): Using hsync ranges from config file [ 61.775] (II) modeset(0): Using vrefresh ranges from config file [ 61.776] (II) modeset(0): Printing DDC gathered Modelines: [ 61.777] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 61.778] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 61.779] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 61.780] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 61.781] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 61.782] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 61.783] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 61.784] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 61.785] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 61.786] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 61.787] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 61.788] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 61.789] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 61.790] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 750.858] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 750.860] (II) modeset(0): Using hsync ranges from config file [ 750.861] (II) modeset(0): Using vrefresh ranges from config file [ 750.862] (II) modeset(0): Printing DDC gathered Modelines: [ 750.863] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 750.864] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 750.864] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 750.865] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 750.866] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 750.867] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 750.868] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 750.869] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 750.871] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 750.872] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 750.873] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 750.874] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 750.875] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 750.877] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 3780.245] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 3780.246] (II) modeset(0): Using hsync ranges from config file [ 3780.247] (II) modeset(0): Using vrefresh ranges from config file [ 3780.247] (II) modeset(0): Printing DDC gathered Modelines: [ 3780.248] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 3780.249] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 3780.250] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 3780.251] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 3780.252] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 3780.254] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 3780.255] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 3780.257] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 3780.258] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 3780.259] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 3780.260] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 3780.261] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 3780.262] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 3780.264] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 4640.944] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 4640.946] (II) modeset(0): Using hsync ranges from config file [ 4640.947] (II) modeset(0): Using vrefresh ranges from config file [ 4640.948] (II) modeset(0): Printing DDC gathered Modelines: [ 4640.949] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 4640.950] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4640.951] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 4640.952] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 4640.953] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 4640.954] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 4640.955] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4640.956] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4640.957] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 4640.958] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 4640.959] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4640.960] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 4640.962] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 4640.963] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 6647.565] (II) event0 - System keyboard multiplexer: device removed [ 6647.567] (II) event1 - System mouse: device removed [ 6647.569] (II) event2 - Sleep Button: device removed [ 6647.570] (II) event3 - Power Button: device removed [ 6647.572] (II) event4 - AT keyboard: device removed [ 6647.573] (II) event5 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 6647.575] (II) event6 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 6647.576] (II) AIGLX: Suspending AIGLX clients for VT switch [ 6653.439] (II) AIGLX: Resuming AIGLX clients after VT switch [ 6653.506] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 6653.509] (II) modeset(0): Using hsync ranges from config file [ 6653.511] (II) modeset(0): Using vrefresh ranges from config file [ 6653.512] (II) modeset(0): Printing DDC gathered Modelines: [ 6653.513] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 6653.514] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 6653.515] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 6653.516] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 6653.517] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 6653.518] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 6653.519] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 6653.520] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 6653.521] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 6653.523] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 6653.524] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 6653.525] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 6653.526] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 6653.528] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 6653.640] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 6653.641] (II) modeset(0): Using hsync ranges from config file [ 6653.642] (II) modeset(0): Using vrefresh ranges from config file [ 6653.643] (II) modeset(0): Printing DDC gathered Modelines: [ 6653.644] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 6653.645] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 6653.646] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 6653.647] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 6653.648] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 6653.649] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 6653.650] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 6653.652] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 6653.653] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 6653.654] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 6653.655] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 6653.658] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 6653.662] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 6653.664] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 6653.693] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 6653.695] (II) event0 - System keyboard multiplexer: device is a keyboard [ 6653.701] (II) event1 - System mouse: is tagged by udev as: Mouse [ 6653.704] (II) event1 - System mouse: device is a pointer [ 6653.709] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 6653.711] (II) event2 - Sleep Button: device is a keyboard [ 6653.716] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 6653.719] (II) event3 - Power Button: device is a keyboard [ 6653.724] (II) event4 - AT keyboard: is tagged by udev as: Keyboard [ 6653.727] (II) event4 - AT keyboard: device is a keyboard [ 6653.736] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 6653.738] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 6653.741] (EE) client bug: Invalid path /dev/input/event6 [ 6653.743] [dix] couldn't enable device 12 [ 6653.745] (II) config/udev: removing device Wacom Co. [ 6653.749] (II) UnloadModule: "libinput" [ 6653.751] (II) config/udev: removing device Microsoft Comfort Curve Keyboard 2000 [ 6653.752] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 6653.754] (II) UnloadModule: "libinput" [ 6653.758] (II) config/udev: Adding input device Wacom Co. (/dev/input/event5) [ 6653.759] (**) Wacom Co.: Applying InputClass "libinput pointer catchall" [ 6653.760] (II) Using input driver 'libinput' for 'Wacom Co.' [ 6653.761] (**) Wacom Co.: always reports core events [ 6653.762] (**) Option "Device" "/dev/input/event5" [ 6653.767] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 6653.769] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 6653.773] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 6653.774] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6653.775] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6653.776] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6653.777] (**) Option "config_info" "udev:/dev/input/event5" [ 6653.779] (II) XINPUT: Adding extended input device "Wacom Co." (type: MOUSE, id 11) [ 6653.780] (**) Option "AccelerationScheme" "none" [ 6653.782] (**) Wacom Co.: (accel) selected scheme none/0 [ 6653.783] (**) Wacom Co.: (accel) acceleration factor: 2.000 [ 6653.785] (**) Wacom Co.: (accel) acceleration threshold: 4 [ 6653.788] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 6653.790] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 6653.925] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event6) [ 6653.927] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "Evdev keyboard" [ 6653.928] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "libinput keyboard catchall" [ 6653.929] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 2000' [ 6653.930] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events [ 6653.931] (**) Option "Device" "/dev/input/event6" [ 6653.935] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 6653.936] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 6653.939] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 6653.940] (**) Option "config_info" "udev:/dev/input/event6" [ 6653.943] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 12) [ 6653.944] (**) Option "xkb_rules" "evdev" [ 6653.948] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 6653.949] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 8950.480] (II) event0 - System keyboard multiplexer: device removed [ 8950.482] (II) event1 - System mouse: device removed [ 8950.484] (II) event2 - Sleep Button: device removed [ 8950.486] (II) event3 - Power Button: device removed [ 8950.488] (II) event4 - AT keyboard: device removed [ 8950.489] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 8950.491] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 8950.492] (II) AIGLX: Suspending AIGLX clients for VT switch [ 8954.742] (II) AIGLX: Resuming AIGLX clients after VT switch [ 8954.809] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 8954.810] (II) modeset(0): Using hsync ranges from config file [ 8954.811] (II) modeset(0): Using vrefresh ranges from config file [ 8954.812] (II) modeset(0): Printing DDC gathered Modelines: [ 8954.813] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 8954.814] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8954.815] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 8954.816] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 8954.817] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 8954.818] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 8954.819] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8954.820] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8954.821] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 8954.822] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 8954.823] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8954.824] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 8954.825] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 8954.826] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 8954.943] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 8954.944] (II) modeset(0): Using hsync ranges from config file [ 8954.945] (II) modeset(0): Using vrefresh ranges from config file [ 8954.946] (II) modeset(0): Printing DDC gathered Modelines: [ 8954.947] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 8954.948] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8954.949] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 8954.950] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 8954.951] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 8954.952] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 8954.953] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8954.954] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8954.955] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 8954.957] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 8954.958] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8954.959] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 8954.960] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 8954.961] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 8954.996] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 8954.997] (II) event0 - System keyboard multiplexer: device is a keyboard [ 8955.004] (II) event1 - System mouse: is tagged by udev as: Mouse [ 8955.007] (II) event1 - System mouse: device is a pointer [ 8955.012] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 8955.014] (II) event2 - Sleep Button: device is a keyboard [ 8955.019] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 8955.020] (II) event3 - Power Button: device is a keyboard [ 8955.025] (II) event4 - AT keyboard: is tagged by udev as: Keyboard [ 8955.027] (II) event4 - AT keyboard: device is a keyboard [ 8955.035] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 8955.038] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 8955.042] (EE) client bug: Invalid path /dev/input/event6 [ 8955.043] [dix] couldn't enable device 12 [ 8955.045] (II) config/udev: removing device Wacom Co. [ 8955.046] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 8955.050] (II) UnloadModule: "libinput" [ 8955.052] (II) config/udev: removing device Microsoft Comfort Curve Keyboard 2000 [ 8955.053] (II) UnloadModule: "libinput" [ 8955.056] (II) config/udev: Adding input device Wacom Co. (/dev/input/event5) [ 8955.057] (**) Wacom Co.: Applying InputClass "libinput pointer catchall" [ 8955.058] (II) Using input driver 'libinput' for 'Wacom Co.' [ 8955.059] (**) Wacom Co.: always reports core events [ 8955.060] (**) Option "Device" "/dev/input/event5" [ 8955.064] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 8955.066] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 8955.070] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 8955.071] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8955.072] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8955.073] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8955.074] (**) Option "config_info" "udev:/dev/input/event5" [ 8955.076] (II) XINPUT: Adding extended input device "Wacom Co." (type: MOUSE, id 11) [ 8955.077] (**) Option "AccelerationScheme" "none" [ 8955.080] (**) Wacom Co.: (accel) selected scheme none/0 [ 8955.082] (**) Wacom Co.: (accel) acceleration factor: 2.000 [ 8955.083] (**) Wacom Co.: (accel) acceleration threshold: 4 [ 8955.086] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 8955.088] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 8955.228] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event6) [ 8955.229] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "Evdev keyboard" [ 8955.230] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "libinput keyboard catchall" [ 8955.231] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 2000' [ 8955.232] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events [ 8955.233] (**) Option "Device" "/dev/input/event6" [ 8955.236] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 8955.238] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 8955.241] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 8955.242] (**) Option "config_info" "udev:/dev/input/event6" [ 8955.244] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 12) [ 8955.245] (**) Option "xkb_rules" "evdev" [ 8955.248] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 8955.250] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 12442.449] (II) event0 - System keyboard multiplexer: device removed [ 12442.452] (II) event1 - System mouse: device removed [ 12442.454] (II) event2 - Sleep Button: device removed [ 12442.456] (II) event3 - Power Button: device removed [ 12442.457] (II) event4 - AT keyboard: device removed [ 12442.459] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 12442.460] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 12442.462] (II) AIGLX: Suspending AIGLX clients for VT switch [ 12446.561] (II) AIGLX: Resuming AIGLX clients after VT switch [ 12446.628] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 12446.629] (II) modeset(0): Using hsync ranges from config file [ 12446.630] (II) modeset(0): Using vrefresh ranges from config file [ 12446.631] (II) modeset(0): Printing DDC gathered Modelines: [ 12446.632] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 12446.633] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 12446.634] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 12446.635] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 12446.636] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 12446.637] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 12446.638] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 12446.639] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 12446.640] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 12446.641] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 12446.642] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 12446.643] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 12446.644] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 12446.645] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 12446.762] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 12446.762] (II) modeset(0): Using hsync ranges from config file [ 12446.763] (II) modeset(0): Using vrefresh ranges from config file [ 12446.765] (II) modeset(0): Printing DDC gathered Modelines: [ 12446.766] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 12446.767] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 12446.768] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 12446.769] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 12446.770] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 12446.771] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 12446.772] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 12446.774] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 12446.775] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 12446.777] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 12446.778] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 12446.779] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 12446.780] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 12446.782] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 12446.814] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 12446.816] (II) event0 - System keyboard multiplexer: device is a keyboard [ 12446.822] (II) event1 - System mouse: is tagged by udev as: Mouse [ 12446.825] (II) event1 - System mouse: device is a pointer [ 12446.830] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 12446.832] (II) event2 - Sleep Button: device is a keyboard [ 12446.837] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 12446.840] (II) event3 - Power Button: device is a keyboard [ 12446.845] (II) event4 - AT keyboard: is tagged by udev as: Keyboard [ 12446.847] (II) event4 - AT keyboard: device is a keyboard [ 12446.855] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 12446.858] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 12446.861] (EE) client bug: Invalid path /dev/input/event6 [ 12446.862] [dix] couldn't enable device 12 [ 12446.864] (II) config/udev: removing device Wacom Co. [ 12446.865] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 12446.869] (II) UnloadModule: "libinput" [ 12446.871] (II) config/udev: removing device Microsoft Comfort Curve Keyboard 2000 [ 12446.873] (II) UnloadModule: "libinput" [ 12446.876] (II) config/udev: Adding input device Wacom Co. (/dev/input/event5) [ 12446.877] (**) Wacom Co.: Applying InputClass "libinput pointer catchall" [ 12446.878] (II) Using input driver 'libinput' for 'Wacom Co.' [ 12446.879] (**) Wacom Co.: always reports core events [ 12446.881] (**) Option "Device" "/dev/input/event5" [ 12446.885] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 12446.887] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 12446.890] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 12446.892] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 12446.893] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 12446.894] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 12446.895] (**) Option "config_info" "udev:/dev/input/event5" [ 12446.897] (II) XINPUT: Adding extended input device "Wacom Co." (type: MOUSE, id 11) [ 12446.898] (**) Option "AccelerationScheme" "none" [ 12446.900] (**) Wacom Co.: (accel) selected scheme none/0 [ 12446.901] (**) Wacom Co.: (accel) acceleration factor: 2.000 [ 12446.902] (**) Wacom Co.: (accel) acceleration threshold: 4 [ 12446.906] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 12446.908] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 12447.014] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event6) [ 12447.015] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "Evdev keyboard" [ 12447.016] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "libinput keyboard catchall" [ 12447.017] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 2000' [ 12447.018] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events [ 12447.019] (**) Option "Device" "/dev/input/event6" [ 12447.022] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 12447.024] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 12447.027] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 12447.028] (**) Option "config_info" "udev:/dev/input/event6" [ 12447.030] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 12) [ 12447.030] (**) Option "xkb_rules" "evdev" [ 12447.034] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 12447.036] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 14947.858] (II) event0 - System keyboard multiplexer: device removed [ 14947.860] (II) event1 - System mouse: device removed [ 14947.862] (II) event2 - Sleep Button: device removed [ 14947.863] (II) event3 - Power Button: device removed [ 14947.865] (II) event4 - AT keyboard: device removed [ 14947.866] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 14947.868] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 14947.869] (II) AIGLX: Suspending AIGLX clients for VT switch [ 14954.065] (II) AIGLX: Resuming AIGLX clients after VT switch [ 14954.130] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 14954.131] (II) modeset(0): Using hsync ranges from config file [ 14954.132] (II) modeset(0): Using vrefresh ranges from config file [ 14954.134] (II) modeset(0): Printing DDC gathered Modelines: [ 14954.135] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 14954.135] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 14954.136] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 14954.137] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 14954.138] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 14954.139] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 14954.140] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 14954.142] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 14954.143] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 14954.144] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 14954.145] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 14954.146] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 14954.148] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 14954.148] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 14954.264] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 14954.265] (II) modeset(0): Using hsync ranges from config file [ 14954.266] (II) modeset(0): Using vrefresh ranges from config file [ 14954.267] (II) modeset(0): Printing DDC gathered Modelines: [ 14954.268] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 14954.269] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 14954.270] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 14954.272] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 14954.273] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 14954.274] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 14954.275] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 14954.276] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 14954.278] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 14954.281] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 14954.284] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 14954.286] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 14954.289] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 14954.291] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 14954.317] (II) event0 - System keyboard multiplexer: is tagged by udev as: Keyboard [ 14954.318] (II) event0 - System keyboard multiplexer: device is a keyboard [ 14954.325] (II) event1 - System mouse: is tagged by udev as: Mouse [ 14954.327] (II) event1 - System mouse: device is a pointer [ 14954.332] (II) event2 - Sleep Button: is tagged by udev as: Keyboard [ 14954.335] (II) event2 - Sleep Button: device is a keyboard [ 14954.340] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 14954.341] (II) event3 - Power Button: device is a keyboard [ 14954.346] (II) event4 - AT keyboard: is tagged by udev as: Keyboard [ 14954.348] (II) event4 - AT keyboard: device is a keyboard [ 14954.357] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 14954.359] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 14954.363] (EE) client bug: Invalid path /dev/input/event6 [ 14954.364] [dix] couldn't enable device 12 [ 14954.370] (II) config/udev: removing device Wacom Co. [ 14954.371] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 14954.375] (II) UnloadModule: "libinput" [ 14954.378] (II) config/udev: removing device Microsoft Comfort Curve Keyboard 2000 [ 14954.380] (II) UnloadModule: "libinput" [ 14954.382] (II) config/udev: Adding input device Wacom Co. (/dev/input/event5) [ 14954.383] (**) Wacom Co.: Applying InputClass "libinput pointer catchall" [ 14954.384] (II) Using input driver 'libinput' for 'Wacom Co.' [ 14954.385] (**) Wacom Co.: always reports core events [ 14954.386] (**) Option "Device" "/dev/input/event5" [ 14954.391] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 14954.393] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 14954.396] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device removed [ 14954.397] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 14954.398] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 14954.399] (II) libinput: Wacom Co.: Step value 0 was provided, libinput Fallback acceleration function is used. [ 14954.400] (**) Option "config_info" "udev:/dev/input/event5" [ 14954.402] (II) XINPUT: Adding extended input device "Wacom Co." (type: MOUSE, id 11) [ 14954.404] (**) Option "AccelerationScheme" "none" [ 14954.406] (**) Wacom Co.: (accel) selected scheme none/0 [ 14954.407] (**) Wacom Co.: (accel) acceleration factor: 2.000 [ 14954.408] (**) Wacom Co.: (accel) acceleration threshold: 4 [ 14954.412] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: is tagged by udev as: Mouse [ 14954.414] (II) event5 - Wacom Co.,Ltd. CTE-450, class 0/0, rev 2.00/1.13, addr 1: device is a pointer [ 14954.541] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 2000 (/dev/input/event6) [ 14954.542] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "Evdev keyboard" [ 14954.544] (**) Microsoft Comfort Curve Keyboard 2000: Applying InputClass "libinput keyboard catchall" [ 14954.545] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 2000' [ 14954.546] (**) Microsoft Comfort Curve Keyboard 2000: always reports core events [ 14954.547] (**) Option "Device" "/dev/input/event6" [ 14954.550] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 14954.552] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 14954.554] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device removed [ 14954.555] (**) Option "config_info" "udev:/dev/input/event6" [ 14954.557] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD, id 12) [ 14954.558] (**) Option "xkb_rules" "evdev" [ 14954.562] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: is tagged by udev as: Keyboard [ 14954.564] (II) event6 - Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2: device is a keyboard [ 18499.799] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 18499.942] (II) modeset(0): Using hsync ranges from config file [ 18499.982] (II) modeset(0): Using vrefresh ranges from config file [ 18499.983] (II) modeset(0): Printing DDC gathered Modelines: [ 18499.984] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 18499.985] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 18499.986] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 18499.987] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 18499.988] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 18499.989] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 18499.990] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 18499.991] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 18499.992] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 18499.993] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 18499.994] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 18499.995] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 18499.997] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 18499.998] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 18539.695] (II) modeset(0): EDID vendor "SAM", prod id 646 [ 18539.788] (II) modeset(0): Using hsync ranges from config file [ 18539.789] (II) modeset(0): Using vrefresh ranges from config file [ 18539.790] (II) modeset(0): Printing DDC gathered Modelines: [ 18539.791] (II) modeset(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP) [ 18539.792] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 18539.793] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 18539.794] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 18539.795] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 18539.796] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 18539.797] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 18539.797] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 18539.799] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 18539.799] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 18539.800] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 18539.801] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 18539.802] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 18539.803] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)