Probe #fe0adb59d8 of Samsung 530XBB

Log: smartctl

/dev/sd0c smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue / Red / Green SSDs Device Model: WDC WDS480G2G0B-00EPW0 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: UK500000 User Capacity: 480,113,590,272 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 20 12:38:41 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 32) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1456 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1857 165 Block_Erase_Count 0x0032 100 100 000 Old_age Always - 278 166 Minimum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 3 167 Max_Bad_Blocks_per_Die 0x0032 100 100 --- Old_age Always - 0 168 Maximum_PE_Cycles_TLC 0x0032 100 100 --- Old_age Always - 5 169 Total_Bad_Blocks 0x0032 100 100 --- Old_age Always - 585 170 Grown_Bad_Blocks 0x0032 100 100 --- Old_age Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Average_PE_Cycles_TLC 0x0032 100 100 000 Old_age Always - 3 174 Unexpected_Power_Loss 0x0032 100 100 000 Old_age Always - 36 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 070 053 000 Old_age Always - 30 (Min/Max 6/53) 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 230 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0x004f003c004f 232 Available_Reservd_Space 0x0033 100 100 005 Pre-fail Always - 100 233 NAND_GB_Written_TLC 0x0032 100 100 --- Old_age Always - 1237 234 NAND_GB_Written_SLC 0x0032 100 100 000 Old_age Always - 3126 241 Host_Writes_GiB 0x0030 100 100 000 Old_age Offline - 1460 242 Host_Reads_GiB 0x0030 100 100 000 Old_age Offline - 2933 244 Temp_Throttle_Status 0x0032 000 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported /dev/sd1c smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Sandisk Product: DA4128 Revision: 0000 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.


Hardware for Linux and BSD

GitHub