/dev/rd0c smartctl 7.0 2018-12-30 r4883 [x86_64-unknown-openbsd6.6] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org /dev/rd0c: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary /dev/sd0c smartctl 7.0 2018-12-30 r4883 [x86_64-unknown-openbsd6.6] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3J0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 6 13:17:24 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 175) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 --- - 0 2 Throughput_Performance P-S--- 161 161 --- - 97 3 Spin_Up_Time POS--- 120 120 --- - 2 4 Start_Stop_Count -O--C- 100 100 --- - 129 5 Reallocated_Sector_Ct PO--CK 100 100 --- - 0 7 Seek_Error_Rate PO-R-- 100 100 --- - 0 8 Seek_Time_Performance P-S--- 138 138 --- - 34 9 Power_On_Hours -O--C- 100 100 --- - 113 10 Spin_Retry_Count PO--C- 100 100 --- - 0 12 Power_Cycle_Count -O--CK 100 100 --- - 128 191 G-Sense_Error_Rate -O-R-- 100 100 --- - 0 192 Power-Off_Retract_Count -O--CK 100 100 --- - 14 193 Load_Cycle_Count -O--C- 100 100 --- - 2636 194 Temperature_Celsius -O---- 150 150 --- - 40 (Min/Max 10/52) 196 Reallocated_Event_Count -O--CK 100 100 --- - 0 197 Current_Pending_Sector -O---K 100 100 --- - 0 198 Offline_Uncorrectable ---R-- 100 100 --- - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 --- - 0 223 Load_Retry_Count -O-R-- 100 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 26/41 Celsius Lifetime Min/Max Temperature: 10/52 Celsius Specified Max Operating Temperature: 40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (85) Index Estimated Time Temperature Celsius 86 2020-05-06 11:10 47 **************************** 87 2020-05-06 11:11 47 **************************** 88 2020-05-06 11:12 46 *************************** 89 2020-05-06 11:13 46 *************************** 90 2020-05-06 11:14 46 *************************** 91 2020-05-06 11:15 47 **************************** ... ..( 5 skipped). .. **************************** 97 2020-05-06 11:21 47 **************************** 98 2020-05-06 11:22 46 *************************** 99 2020-05-06 11:23 47 **************************** 100 2020-05-06 11:24 46 *************************** ... ..( 4 skipped). .. *************************** 105 2020-05-06 11:29 46 *************************** 106 2020-05-06 11:30 47 **************************** 107 2020-05-06 11:31 46 *************************** ... ..( 11 skipped). .. *************************** 119 2020-05-06 11:43 46 *************************** 120 2020-05-06 11:44 47 **************************** 121 2020-05-06 11:45 47 **************************** 122 2020-05-06 11:46 46 *************************** ... ..( 13 skipped). .. *************************** 8 2020-05-06 12:00 46 *************************** 9 2020-05-06 12:01 ? - 10 2020-05-06 12:02 25 ****** 11 2020-05-06 12:03 27 ******** 12 2020-05-06 12:04 28 ********* 13 2020-05-06 12:05 29 ********** 14 2020-05-06 12:06 29 ********** 15 2020-05-06 12:07 30 *********** 16 2020-05-06 12:08 31 ************ 17 2020-05-06 12:09 ? - 18 2020-05-06 12:10 28 ********* 19 2020-05-06 12:11 28 ********* 20 2020-05-06 12:12 29 ********** 21 2020-05-06 12:13 31 ************ 22 2020-05-06 12:14 31 ************ 23 2020-05-06 12:15 32 ************* 24 2020-05-06 12:16 33 ************** 25 2020-05-06 12:17 33 ************** 26 2020-05-06 12:18 34 *************** 27 2020-05-06 12:19 34 *************** 28 2020-05-06 12:20 34 *************** 29 2020-05-06 12:21 35 **************** 30 2020-05-06 12:22 35 **************** 31 2020-05-06 12:23 35 **************** 32 2020-05-06 12:24 36 ***************** 33 2020-05-06 12:25 36 ***************** 34 2020-05-06 12:26 ? - 35 2020-05-06 12:27 27 ******** 36 2020-05-06 12:28 27 ******** 37 2020-05-06 12:29 28 ********* 38 2020-05-06 12:30 29 ********** 39 2020-05-06 12:31 29 ********** 40 2020-05-06 12:32 30 *********** 41 2020-05-06 12:33 31 ************ 42 2020-05-06 12:34 31 ************ 43 2020-05-06 12:35 32 ************* 44 2020-05-06 12:36 32 ************* 45 2020-05-06 12:37 33 ************** 46 2020-05-06 12:38 33 ************** 47 2020-05-06 12:39 34 *************** 48 2020-05-06 12:40 ? - 49 2020-05-06 12:41 ? - 50 2020-05-06 12:42 27 ******** 51 2020-05-06 12:43 28 ********* 52 2020-05-06 12:44 28 ********* 53 2020-05-06 12:45 29 ********** 54 2020-05-06 12:46 30 *********** 55 2020-05-06 12:47 31 ************ 56 2020-05-06 12:48 32 ************* 57 2020-05-06 12:49 33 ************** 58 2020-05-06 12:50 33 ************** 59 2020-05-06 12:51 34 *************** 60 2020-05-06 12:52 35 **************** 61 2020-05-06 12:53 35 **************** 62 2020-05-06 12:54 36 ***************** 63 2020-05-06 12:55 36 ***************** 64 2020-05-06 12:56 37 ****************** 65 2020-05-06 12:57 37 ****************** 66 2020-05-06 12:58 38 ******************* 67 2020-05-06 12:59 38 ******************* 68 2020-05-06 13:00 38 ******************* 69 2020-05-06 13:01 39 ******************** ... ..( 2 skipped). .. ******************** 72 2020-05-06 13:04 39 ******************** 73 2020-05-06 13:05 40 ********************* ... ..( 2 skipped). .. ********************* 76 2020-05-06 13:08 40 ********************* 77 2020-05-06 13:09 41 ********************** ... ..( 2 skipped). .. ********************** 80 2020-05-06 13:12 41 ********************** 81 2020-05-06 13:13 40 ********************* ... ..( 3 skipped). .. ********************* 85 2020-05-06 13:17 40 ********************* SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sd1c smartctl 7.0 2018-12-30 r4883 [x86_64-unknown-openbsd6.6] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: UFD 2.0 Product: Silicon-Power8G Revision: 1100 Compliance: SPC-2 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. /dev/vnd5c smartctl 7.0 2018-12-30 r4883 [x86_64-unknown-openbsd6.6] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org /dev/vnd5c: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary