Probe #fb21a44f71 of Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT01B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Sep 29 20:54:46 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 19489 12 Power_Cycle_Count -O--CK 099 099 000 - 119 177 Wear_Leveling_Count PO--C- 098 098 000 - 31 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 064 045 000 - 36 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 86 241 Total_LBAs_Written -O--CK 099 099 000 - 15747922129 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 26/44 Celsius Lifetime Min/Max Temperature: 21/61 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (73) Index Estimated Time Temperature Celsius 74 2023-09-28 23:40 34 *************** 75 2023-09-28 23:50 34 *************** 76 2023-09-29 00:00 36 ***************** 77 2023-09-29 00:10 34 *************** ... ..( 3 skipped). .. *************** 81 2023-09-29 00:50 34 *************** 82 2023-09-29 01:00 33 ************** 83 2023-09-29 01:10 34 *************** 84 2023-09-29 01:20 34 *************** 85 2023-09-29 01:30 33 ************** ... ..( 4 skipped). .. ************** 90 2023-09-29 02:20 33 ************** 91 2023-09-29 02:30 32 ************* 92 2023-09-29 02:40 33 ************** 93 2023-09-29 02:50 32 ************* ... ..( 9 skipped). .. ************* 103 2023-09-29 04:30 32 ************* 104 2023-09-29 04:40 31 ************ 105 2023-09-29 04:50 32 ************* 106 2023-09-29 05:00 31 ************ ... ..( 10 skipped). .. ************ 117 2023-09-29 06:50 31 ************ 118 2023-09-29 07:00 30 *********** 119 2023-09-29 07:10 31 ************ 120 2023-09-29 07:20 31 ************ 121 2023-09-29 07:30 31 ************ 122 2023-09-29 07:40 30 *********** 123 2023-09-29 07:50 30 *********** 124 2023-09-29 08:00 30 *********** 125 2023-09-29 08:10 31 ************ 126 2023-09-29 08:20 31 ************ 127 2023-09-29 08:30 31 ************ 0 2023-09-29 08:40 34 *************** 1 2023-09-29 08:50 30 *********** ... ..( 3 skipped). .. *********** 5 2023-09-29 09:30 30 *********** 6 2023-09-29 09:40 31 ************ ... ..( 3 skipped). .. ************ 10 2023-09-29 10:20 31 ************ 11 2023-09-29 10:30 32 ************* 12 2023-09-29 10:40 31 ************ 13 2023-09-29 10:50 32 ************* 14 2023-09-29 11:00 36 ***************** 15 2023-09-29 11:10 32 ************* 16 2023-09-29 11:20 32 ************* 17 2023-09-29 11:30 32 ************* 18 2023-09-29 11:40 33 ************** 19 2023-09-29 11:50 32 ************* 20 2023-09-29 12:00 33 ************** ... ..( 5 skipped). .. ************** 26 2023-09-29 13:00 33 ************** 27 2023-09-29 13:10 34 *************** 28 2023-09-29 13:20 33 ************** 29 2023-09-29 13:30 33 ************** 30 2023-09-29 13:40 38 ******************* 31 2023-09-29 13:50 33 ************** 32 2023-09-29 14:00 33 ************** 33 2023-09-29 14:10 33 ************** 34 2023-09-29 14:20 34 *************** 35 2023-09-29 14:30 37 ****************** 36 2023-09-29 14:40 34 *************** ... ..( 6 skipped). .. *************** 43 2023-09-29 15:50 34 *************** 44 2023-09-29 16:00 35 **************** ... ..( 5 skipped). .. **************** 50 2023-09-29 17:00 35 **************** 51 2023-09-29 17:10 36 ***************** 52 2023-09-29 17:20 35 **************** ... ..( 3 skipped). .. **************** 56 2023-09-29 18:00 35 **************** 57 2023-09-29 18:10 37 ****************** 58 2023-09-29 18:20 35 **************** ... ..( 9 skipped). .. **************** 68 2023-09-29 20:00 35 **************** 69 2023-09-29 20:10 36 ***************** 70 2023-09-29 20:20 35 **************** 71 2023-09-29 20:30 37 ****************** 72 2023-09-29 20:40 39 ******************** 73 2023-09-29 20:50 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 119 --- Lifetime Power-On Resets 0x01 0x010 4 19489 --- Power-on Hours 0x01 0x018 6 15747922129 --- Logical Sectors Written 0x01 0x020 6 223891241 --- Number of Write Commands 0x01 0x028 6 1325925964 --- Logical Sectors Read 0x01 0x030 6 29517866 --- Number of Read Commands 0x01 0x038 6 2643000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 54 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x020 1 61 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 699 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 70 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 70 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub