/dev/ada0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Hitachi HTS723232A7A364 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: EC2OA60W User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Jan 14 13:59:32 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 72) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 253 253 033 - 1 4 Start_Stop_Count -O--C- 064 064 000 - 57302 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 052 052 000 - 21444 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 12102 191 G-Sense_Error_Rate -O-R-- 099 099 000 - 2 192 Power-Off_Retract_Count -O--CK 100 100 000 - 18 193 Load_Cycle_Count -O--C- 038 038 000 - 622330 194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 10/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 14/34 Celsius Lifetime Min/Max Temperature: 10/50 Celsius Specified Max Operating Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (118) Index Estimated Time Temperature Celsius 119 2022-01-14 11:52 32 ************* 120 2022-01-14 11:53 32 ************* 121 2022-01-14 11:54 33 ************** ... ..( 2 skipped). .. ************** 124 2022-01-14 11:57 33 ************** 125 2022-01-14 11:58 34 *************** ... ..( 5 skipped). .. *************** 3 2022-01-14 12:04 34 *************** 4 2022-01-14 12:05 35 **************** 5 2022-01-14 12:06 34 *************** 6 2022-01-14 12:07 34 *************** 7 2022-01-14 12:08 34 *************** 8 2022-01-14 12:09 35 **************** 9 2022-01-14 12:10 34 *************** ... ..( 6 skipped). .. *************** 16 2022-01-14 12:17 34 *************** 17 2022-01-14 12:18 35 **************** 18 2022-01-14 12:19 35 **************** 19 2022-01-14 12:20 35 **************** 20 2022-01-14 12:21 34 *************** 21 2022-01-14 12:22 35 **************** ... ..( 11 skipped). .. **************** 33 2022-01-14 12:34 35 **************** 34 2022-01-14 12:35 36 ***************** 35 2022-01-14 12:36 35 **************** 36 2022-01-14 12:37 36 ***************** ... ..( 4 skipped). .. ***************** 41 2022-01-14 12:42 36 ***************** 42 2022-01-14 12:43 35 **************** 43 2022-01-14 12:44 35 **************** 44 2022-01-14 12:45 36 ***************** 45 2022-01-14 12:46 36 ***************** 46 2022-01-14 12:47 35 **************** ... ..( 9 skipped). .. **************** 56 2022-01-14 12:57 35 **************** 57 2022-01-14 12:58 36 ***************** 58 2022-01-14 12:59 35 **************** ... ..( 16 skipped). .. **************** 75 2022-01-14 13:16 35 **************** 76 2022-01-14 13:17 ? - 77 2022-01-14 13:18 15 - 78 2022-01-14 13:19 16 - 79 2022-01-14 13:20 17 - 80 2022-01-14 13:21 18 - 81 2022-01-14 13:22 19 - 82 2022-01-14 13:23 21 ** 83 2022-01-14 13:24 23 **** 84 2022-01-14 13:25 24 ***** 85 2022-01-14 13:26 25 ****** 86 2022-01-14 13:27 26 ******* 87 2022-01-14 13:28 26 ******* 88 2022-01-14 13:29 27 ******** 89 2022-01-14 13:30 27 ******** 90 2022-01-14 13:31 27 ******** 91 2022-01-14 13:32 28 ********* 92 2022-01-14 13:33 29 ********** 93 2022-01-14 13:34 29 ********** 94 2022-01-14 13:35 29 ********** 95 2022-01-14 13:36 30 *********** 96 2022-01-14 13:37 30 *********** 97 2022-01-14 13:38 30 *********** 98 2022-01-14 13:39 31 ************ 99 2022-01-14 13:40 31 ************ 100 2022-01-14 13:41 31 ************ 101 2022-01-14 13:42 32 ************* 102 2022-01-14 13:43 33 ************** 103 2022-01-14 13:44 34 *************** 104 2022-01-14 13:45 34 *************** 105 2022-01-14 13:46 33 ************** ... ..( 9 skipped). .. ************** 115 2022-01-14 13:56 33 ************** 116 2022-01-14 13:57 32 ************* 117 2022-01-14 13:58 32 ************* 118 2022-01-14 13:59 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 12102 --- Lifetime Power-On Resets 0x01 0x010 4 21444 --- Power-on Hours 0x01 0x018 6 6218496318 --- Logical Sectors Written 0x01 0x020 6 28457109 --- Number of Write Commands 0x01 0x028 6 11725186354 --- Logical Sectors Read 0x01 0x030 6 111747241 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 6254 --- Spindle Motor Power-on Hours 0x03 0x010 4 6206 --- Head Flying Hours 0x03 0x018 4 622331 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 354 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 13917 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 31 N-- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 10 --- Lowest Temperature 0x05 0x030 1 39 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 98587 --- Number of Hardware Resets 0x06 0x010 4 12273 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p6 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SanDisk SSD P4 64GB Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: SSD 8.13 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 1.8 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 2d SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jan 14 13:59:34 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 16) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 21870 12 Power_Cycle_Count -O---- 100 100 000 - 12102 171 Unknown_Attribute -O---- 100 100 000 - 37 172 Unknown_Attribute -O---- 100 100 000 - 270876664 173 Unknown_Attribute -O---- 100 100 000 - 4508 174 Unknown_Attribute -O---- 100 100 000 - 712 187 Reported_Uncorrect -O---- 100 100 000 - 247 199 UDMA_CRC_Error_Count -O---- 100 100 000 - 0 230 Unknown_SSD_Attribute -O---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 099 100 005 - 0 241 Total_LBAs_Written -O---- 100 100 000 - 58331913431 242 Total_LBAs_Read -O---- 100 100 000 - 69162675678 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. SMART Extended Comprehensive Error Log Version: 1 (16 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported