/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725050GLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GM4OA5CA User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Apr 13 20:59:37 2022 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7890) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 096 096 016 - 8 2 Throughput_Performance P-S--- 133 133 054 - 139 3 Spin_Up_Time POS--- 128 128 024 - 328 (Average 272) 4 Start_Stop_Count -O--C- 100 100 000 - 109 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 131 131 020 - 29 9 Power_On_Hours -O--C- 086 086 000 - 100673 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 109 192 Power-Off_Retract_Count -O--CK 098 098 000 - 3563 193 Load_Cycle_Count -O--C- 098 098 000 - 3563 194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 12/43) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 35115 - # 2 Short offline Completed without error 00% 35091 - # 3 Short offline Completed without error 00% 35091 - # 4 Short offline Completed without error 00% 35067 - # 5 Short offline Completed without error 00% 35043 - # 6 Short offline Completed without error 00% 35019 - # 7 Extended offline Completed without error 00% 34998 - # 8 Short offline Completed without error 00% 34995 - # 9 Short offline Completed without error 00% 34971 - #10 Short offline Completed without error 00% 34947 - #11 Short offline Completed without error 00% 34923 - #12 Short offline Completed without error 00% 34899 - #13 Short offline Completed without error 00% 34875 - #14 Short offline Completed without error 00% 34851 - #15 Extended offline Completed without error 00% 34830 - #16 Short offline Completed without error 00% 34827 - #17 Short offline Completed without error 00% 34803 - #18 Short offline Completed without error 00% 34779 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 29/38 Celsius Lifetime Min/Max Temperature: 12/43 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (43) Index Estimated Time Temperature Celsius 44 2022-04-13 18:52 36 ***************** ... ..(126 skipped). .. ***************** 43 2022-04-13 20:59 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3020ALA632 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ML6OAA10 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5940 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 13 20:59:37 2022 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 28) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 380) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 133 133 054 - 105 3 Spin_Up_Time POS--- 135 135 024 - 404 (Average 405) 4 Start_Stop_Count -O--C- 100 100 000 - 136 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 146 146 020 - 29 9 Power_On_Hours -O--C- 089 089 000 - 78846 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 135 192 Power-Off_Retract_Count -O--CK 098 098 000 - 3116 193 Load_Cycle_Count -O--C- 098 098 000 - 3116 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 16/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13288 - # 2 Short offline Completed without error 00% 13264 - # 3 Extended offline Completed without error 00% 13247 - # 4 Short offline Completed without error 00% 13240 - # 5 Short offline Completed without error 00% 13216 - # 6 Short offline Completed without error 00% 13192 - # 7 Short offline Completed without error 00% 13168 - # 8 Short offline Completed without error 00% 13144 - # 9 Short offline Completed without error 00% 13120 - #10 Short offline Completed without error 00% 13096 - #11 Extended offline Completed without error 00% 13079 - #12 Short offline Completed without error 00% 13072 - #13 Short offline Completed without error 00% 13048 - #14 Short offline Completed without error 00% 13024 - #15 Short offline Completed without error 00% 13000 - #16 Short offline Completed without error 00% 12976 - #17 Short offline Completed without error 00% 12952 - #18 Short offline Completed without error 00% 12928 - #19 Extended offline Completed without error 00% 12911 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/37 Celsius Lifetime Min/Max Temperature: 16/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (123) Index Estimated Time Temperature Celsius 124 2022-04-13 18:52 32 ************* 125 2022-04-13 18:53 32 ************* 126 2022-04-13 18:54 33 ************** 127 2022-04-13 18:55 33 ************** 0 2022-04-13 18:56 32 ************* ... ..( 26 skipped). .. ************* 27 2022-04-13 19:23 32 ************* 28 2022-04-13 19:24 33 ************** 29 2022-04-13 19:25 33 ************** 30 2022-04-13 19:26 32 ************* 31 2022-04-13 19:27 32 ************* 32 2022-04-13 19:28 33 ************** 33 2022-04-13 19:29 33 ************** 34 2022-04-13 19:30 33 ************** 35 2022-04-13 19:31 32 ************* ... ..( 13 skipped). .. ************* 49 2022-04-13 19:45 32 ************* 50 2022-04-13 19:46 33 ************** 51 2022-04-13 19:47 33 ************** 52 2022-04-13 19:48 32 ************* ... ..( 4 skipped). .. ************* 57 2022-04-13 19:53 32 ************* 58 2022-04-13 19:54 33 ************** 59 2022-04-13 19:55 33 ************** 60 2022-04-13 19:56 32 ************* ... ..( 3 skipped). .. ************* 64 2022-04-13 20:00 32 ************* 65 2022-04-13 20:01 33 ************** ... ..( 4 skipped). .. ************** 70 2022-04-13 20:06 33 ************** 71 2022-04-13 20:07 32 ************* ... ..( 15 skipped). .. ************* 87 2022-04-13 20:23 32 ************* 88 2022-04-13 20:24 33 ************** 89 2022-04-13 20:25 32 ************* ... ..( 33 skipped). .. ************* 123 2022-04-13 20:59 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 135 --- Lifetime Power-On Resets 0x01 0x010 4 78846 --- Power-on Hours 0x01 0x018 6 20376177192 --- Logical Sectors Written 0x01 0x020 6 80870969 --- Number of Write Commands 0x01 0x028 6 11571710619 --- Logical Sectors Read 0x01 0x030 6 63770047 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 78829 --- Spindle Motor Power-on Hours 0x03 0x010 4 78829 --- Head Flying Hours 0x03 0x018 4 3116 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 32 N-- Average Short Term Temperature 0x05 0x018 1 32 N-- Average Long Term Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3162 --- Number of Hardware Resets 0x06 0x010 4 1050 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada2 smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3020ALA632 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ML6OAA10 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5940 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 13 20:59:40 2022 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 28) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 375) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 134 134 054 - 103 3 Spin_Up_Time POS--- 147 147 024 - 407 (Average 338) 4 Start_Stop_Count -O--C- 100 100 000 - 136 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 144 144 020 - 30 9 Power_On_Hours -O--C- 089 089 000 - 78846 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 136 192 Power-Off_Retract_Count -O--CK 098 098 000 - 3095 193 Load_Cycle_Count -O--C- 098 098 000 - 3095 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 16/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13289 - # 2 Extended offline Completed without error 00% 13272 - # 3 Short offline Completed without error 00% 13265 - # 4 Short offline Completed without error 00% 13241 - # 5 Short offline Completed without error 00% 13217 - # 6 Short offline Completed without error 00% 13193 - # 7 Short offline Completed without error 00% 13169 - # 8 Short offline Completed without error 00% 13145 - # 9 Short offline Completed without error 00% 13121 - #10 Extended offline Completed without error 00% 13104 - #11 Short offline Completed without error 00% 13097 - #12 Short offline Completed without error 00% 13073 - #13 Short offline Completed without error 00% 13049 - #14 Short offline Completed without error 00% 13025 - #15 Short offline Completed without error 00% 13001 - #16 Short offline Completed without error 00% 12977 - #17 Short offline Completed without error 00% 12953 - #18 Extended offline Completed without error 00% 12936 - #19 Short offline Completed without error 00% 12929 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/36 Celsius Lifetime Min/Max Temperature: 16/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (114) Index Estimated Time Temperature Celsius 115 2022-04-13 18:52 32 ************* 116 2022-04-13 18:53 33 ************** ... ..( 2 skipped). .. ************** 119 2022-04-13 18:56 33 ************** 120 2022-04-13 18:57 32 ************* 121 2022-04-13 18:58 32 ************* 122 2022-04-13 18:59 33 ************** 123 2022-04-13 19:00 32 ************* 124 2022-04-13 19:01 32 ************* 125 2022-04-13 19:02 32 ************* 126 2022-04-13 19:03 33 ************** 127 2022-04-13 19:04 32 ************* ... ..( 17 skipped). .. ************* 17 2022-04-13 19:22 32 ************* 18 2022-04-13 19:23 33 ************** ... ..( 2 skipped). .. ************** 21 2022-04-13 19:26 33 ************** 22 2022-04-13 19:27 32 ************* 23 2022-04-13 19:28 33 ************** ... ..( 3 skipped). .. ************** 27 2022-04-13 19:32 33 ************** 28 2022-04-13 19:33 32 ************* 29 2022-04-13 19:34 32 ************* 30 2022-04-13 19:35 32 ************* 31 2022-04-13 19:36 33 ************** 32 2022-04-13 19:37 32 ************* 33 2022-04-13 19:38 33 ************** 34 2022-04-13 19:39 32 ************* ... ..( 5 skipped). .. ************* 40 2022-04-13 19:45 32 ************* 41 2022-04-13 19:46 33 ************** ... ..( 3 skipped). .. ************** 45 2022-04-13 19:50 33 ************** 46 2022-04-13 19:51 32 ************* 47 2022-04-13 19:52 32 ************* 48 2022-04-13 19:53 33 ************** ... ..( 3 skipped). .. ************** 52 2022-04-13 19:57 33 ************** 53 2022-04-13 19:58 32 ************* 54 2022-04-13 19:59 33 ************** ... ..( 10 skipped). .. ************** 65 2022-04-13 20:10 33 ************** 66 2022-04-13 20:11 32 ************* 67 2022-04-13 20:12 33 ************** 68 2022-04-13 20:13 32 ************* 69 2022-04-13 20:14 32 ************* 70 2022-04-13 20:15 33 ************** 71 2022-04-13 20:16 33 ************** 72 2022-04-13 20:17 33 ************** 73 2022-04-13 20:18 32 ************* ... ..( 3 skipped). .. ************* 77 2022-04-13 20:22 32 ************* 78 2022-04-13 20:23 33 ************** ... ..( 2 skipped). .. ************** 81 2022-04-13 20:26 33 ************** 82 2022-04-13 20:27 32 ************* ... ..( 25 skipped). .. ************* 108 2022-04-13 20:53 32 ************* 109 2022-04-13 20:54 33 ************** 110 2022-04-13 20:55 33 ************** 111 2022-04-13 20:56 32 ************* ... ..( 2 skipped). .. ************* 114 2022-04-13 20:59 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 136 --- Lifetime Power-On Resets 0x01 0x010 4 78846 --- Power-on Hours 0x01 0x018 6 22502184015 --- Logical Sectors Written 0x01 0x020 6 84056096 --- Number of Write Commands 0x01 0x028 6 13384903804 --- Logical Sectors Read 0x01 0x030 6 64713297 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 78829 --- Spindle Motor Power-on Hours 0x03 0x010 4 78829 --- Head Flying Hours 0x03 0x018 4 3095 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 6 --- Read Recovery Attempts 0x03 0x030 4 11 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 32 N-- Average Short Term Temperature 0x05 0x018 1 33 N-- Average Long Term Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3158 --- Number of Hardware Resets 0x06 0x010 4 1050 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada3 smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Deskstar 7K4000 Device Model: Hitachi HDS724040ALE640 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: MJAOA3B0 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 13 20:59:43 2022 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 574) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 137 137 054 - 78 3 Spin_Up_Time POS--- 138 138 024 - 613 (Average 507) 4 Start_Stop_Count -O--C- 100 100 000 - 3012 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 117 117 020 - 36 9 Power_On_Hours -O--C- 097 097 000 - 24618 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2083 192 Power-Off_Retract_Count -O--CK 097 097 000 - 3809 193 Load_Cycle_Count -O--C- 097 097 000 - 3809 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 11/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 24611 - # 2 Short offline Completed without error 00% 24598 - # 3 Short offline Completed without error 00% 24574 - # 4 Short offline Completed without error 00% 24550 - # 5 Short offline Completed without error 00% 24526 - # 6 Short offline Completed without error 00% 24502 - # 7 Short offline Completed without error 00% 24478 - # 8 Short offline Completed without error 00% 24454 - # 9 Extended offline Completed without error 00% 24442 - #10 Short offline Completed without error 00% 24430 - #11 Short offline Completed without error 00% 24406 - #12 Short offline Completed without error 00% 24382 - #13 Short offline Completed without error 00% 24358 - #14 Short offline Completed without error 00% 24334 - #15 Short offline Completed without error 00% 24310 - #16 Short offline Completed without error 00% 24286 - #17 Extended offline Completed without error 00% 24277 - #18 Short offline Completed without error 00% 24262 - #19 Short offline Completed without error 00% 24238 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 33/42 Celsius Lifetime Min/Max Temperature: 11/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (5) Index Estimated Time Temperature Celsius 6 2022-04-13 18:52 37 ****************** ... ..(126 skipped). .. ****************** 5 2022-04-13 20:59 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2083 --- Lifetime Power-On Resets 0x01 0x010 4 24618 --- Power-on Hours 0x01 0x018 6 43689916525 --- Logical Sectors Written 0x01 0x020 6 159602913 --- Number of Write Commands 0x01 0x028 6 205288218443 --- Logical Sectors Read 0x01 0x030 6 435675430 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 23564 --- Spindle Motor Power-on Hours 0x03 0x010 4 23564 --- Head Flying Hours 0x03 0x018 4 3809 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 7 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 38 N-- Average Short Term Temperature 0x05 0x018 1 37 N-- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 11 --- Lowest Temperature 0x05 0x030 1 47 N-- Highest Average Short Term Temperature 0x05 0x038 1 19 N-- Lowest Average Short Term Temperature 0x05 0x040 1 44 N-- Highest Average Long Term Temperature 0x05 0x048 1 20 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7783 --- Number of Hardware Resets 0x06 0x010 4 4557 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada4 smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K500 Device Model: HDS725050KLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: K2AOAD1A User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 Local Time is: Wed Apr 13 20:59:46 2022 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10419) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--- 120 120 024 - 600 (Average 561) 4 Start_Stop_Count -O--C- 100 100 000 - 195 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 087 087 000 - 94376 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 195 192 Power-Off_Retract_Count -O--CK 097 097 050 - 4000 193 Load_Cycle_Count -O--C- 097 097 050 - 4000 194 Temperature_Celsius -O---- 112 112 000 - 49 (Min/Max 15/60) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 567 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 533 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 533 [0] occurred at disk power-on lifetime: 24194 hours (1008 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 70 00 00 11 f2 45 b1 41 00 Error: ICRC, ABRT 112 sectors at LBA = 0x11f245b1 = 301090225 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT Error 532 [3] occurred at disk power-on lifetime: 24194 hours (1008 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 70 00 00 11 f2 45 b1 41 00 Error: ICRC, ABRT 112 sectors at LBA = 0x11f245b1 = 301090225 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 35 00 00 00 18 00 00 25 05 2c 22 40 00 08:49:47.400 WRITE DMA EXT Error 531 [2] occurred at disk power-on lifetime: 24194 hours (1008 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 70 00 00 11 f2 45 b1 41 00 Error: ICRC, ABRT 112 sectors at LBA = 0x11f245b1 = 301090225 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 35 00 00 00 18 00 00 25 05 2c 22 40 00 08:49:47.400 WRITE DMA EXT 25 00 00 00 80 00 00 11 f2 47 e2 40 00 08:49:47.400 READ DMA EXT Error 530 [1] occurred at disk power-on lifetime: 24194 hours (1008 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 50 00 00 11 f2 45 d1 41 00 Error: ICRC, ABRT 80 sectors at LBA = 0x11f245d1 = 301090257 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 45 a2 40 00 08:49:47.400 READ DMA EXT 35 00 00 00 18 00 00 25 05 2c 22 40 00 08:49:47.400 WRITE DMA EXT 25 00 00 00 80 00 00 11 f2 47 e2 40 00 08:49:47.400 READ DMA EXT 25 00 00 00 80 00 00 11 f2 47 e2 40 00 08:49:47.400 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 24245 - # 2 Short offline Completed without error 00% 24221 - # 3 Extended offline Completed without error 00% 24201 - # 4 Short offline Completed without error 00% 24197 - # 5 Short offline Completed without error 00% 24174 - # 6 Short offline Completed without error 00% 24150 - # 7 Short offline Completed without error 00% 24126 - # 8 Short offline Completed without error 00% 24102 - # 9 Short offline Completed without error 00% 24078 - #10 Short offline Completed without error 00% 24054 - #11 Extended offline Completed without error 00% 24034 - #12 Short offline Completed without error 00% 24030 - #13 Short offline Completed without error 00% 24006 - #14 Short offline Completed without error 00% 23982 - #15 Short offline Completed without error 00% 23962 - #16 Short offline Completed without error 00% 23938 - #17 Short offline Completed without error 00% 23914 - #18 Short offline Completed without error 00% 23890 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 49 Celsius Power Cycle Min/Max Temperature: --/53 Celsius Lifetime Min/Max Temperature: --/60 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (45) Index Estimated Time Temperature Celsius 46 2022-04-13 18:52 52 ********************************* ... ..(126 skipped). .. ********************************* 45 2022-04-13 20:59 52 ********************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported