Probe #f7aa3576ae of Lenovo ThinkPad X220 4291QT...

Log: smartctl

/dev/sd0c smartctl 7.2 2020-12-30 r5155 [OpenBSD 7.0 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: ADATA SP550 Serial Number: -- Firmware Version: O1203AB User Capacity: 240,056,327,680 bytes [240 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Apr 13 22:12:03 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 6 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 3743 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 4439 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 25 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 336 148 Total_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 683959 149 Max_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 9268 150 Min_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 9073 151 Average_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 9242 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 174366 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 183 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 82 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 136 169 Remaining_Lifetime_Perc 0x0000 100 100 001 Old_age Offline - 87 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 6 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 342 194 Temperature_Celsius 0x0000 100 100 070 Old_age Offline - 33 (40 40 41 43 0) 199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 897772 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 1510062 245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 1029849 246 SLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 1367918 247 Raid_Recoverty_Ct 0x0000 100 100 000 Old_age Offline - 0 SMART Error Log Version: 1 Invalid Error Log index = 0x06 (T13/1321D rev 1c Section 8.41.6.8.2.2 gives valid range from 1 to 5) Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 159 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.


Hardware for Linux and BSD

GitHub