/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital AV-GP Device Model: WDC WD5000AVCS-632DY1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.00A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Feb 10 13:02:58 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 140) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 557 3 Spin_Up_Time POS--K 188 186 021 - 3566 4 Start_Stop_Count -O--CK 098 098 000 - 2188 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 056 056 000 - 32501 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1775 192 Power-Off_Retract_Count -O--CK 200 200 000 - 598 193 Load_Cycle_Count -O--CK 200 200 000 - 1589 194 Temperature_Celsius -O---K 109 093 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 10875 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 631 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 631 [6] occurred at disk power-on lifetime: 31192 hours (1299 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 06 56 6e 9a e0 00 Error: UNC 128 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 06 56 6e 80 e0 00 01:32:19.074 READ DMA EXT 25 00 00 00 80 00 00 06 56 6e 00 e0 00 01:32:19.048 READ DMA EXT 25 00 00 00 08 00 00 00 63 ed 58 e0 00 01:32:19.047 READ DMA EXT 25 00 00 00 10 00 00 00 63 ec d0 e0 00 01:32:19.029 READ DMA EXT 25 00 00 00 08 00 00 01 67 ae e0 e0 00 01:32:19.029 READ DMA EXT Error 630 [5] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 06 56 6e 9a e0 00 Error: UNC 128 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 06 56 6e 80 e0 00 00:53:54.489 READ DMA EXT 25 00 00 00 80 00 00 06 56 6e 00 e0 00 00:53:54.469 READ DMA EXT 25 00 00 00 08 00 00 07 c5 c7 f0 e0 00 00:53:54.469 READ DMA EXT 25 00 00 00 08 00 00 07 c5 c7 e0 e0 00 00:53:54.469 READ DMA EXT 25 00 00 00 08 00 00 07 c5 c7 90 e0 00 00:53:54.441 READ DMA EXT Error 629 [4] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:50:05.368 READ DMA EXT 35 00 00 00 08 00 00 00 00 7d 50 e0 00 00:50:05.368 WRITE DMA EXT 25 00 00 00 04 00 00 07 c5 c5 0c e0 00 00:50:05.367 READ DMA EXT 35 00 00 00 04 00 00 07 c5 c5 0c e0 00 00:50:05.367 WRITE DMA EXT 25 00 00 00 3d 00 00 00 00 13 f9 e0 00 00:50:05.367 READ DMA EXT Error 628 [3] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:50:02.665 READ DMA EXT 25 00 00 00 05 00 00 00 00 09 18 e0 00 00:50:02.665 READ DMA EXT 25 00 00 00 02 00 00 06 56 6e e8 e0 00 00:50:02.644 READ DMA EXT 25 00 00 00 09 00 00 00 00 35 18 e0 00 00:50:02.630 READ DMA EXT 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:59.977 READ DMA EXT Error 627 [2] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:59.977 READ DMA EXT 25 00 00 00 04 00 00 00 00 8d 40 e0 00 00:49:59.971 READ DMA EXT 25 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:59.971 READ DMA EXT 35 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:59.971 WRITE DMA EXT 25 00 00 00 02 00 00 06 50 f1 aa e0 00 00:49:59.970 READ DMA EXT Error 626 [1] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:57.436 READ DMA EXT ea 00 00 00 00 56 6c ed 00 00 00 e0 00 00:49:57.407 FLUSH CACHE EXT 25 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:57.407 READ DMA EXT 35 00 00 00 08 00 00 00 00 7d 40 e0 00 00:49:57.407 WRITE DMA EXT 35 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:57.407 WRITE DMA EXT Error 625 [0] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:54.202 READ DMA EXT 25 00 00 00 08 00 00 00 00 7d 58 e0 00 00:49:54.201 READ DMA EXT 25 00 00 00 02 00 00 06 56 6e dc e0 00 00:49:54.190 READ DMA EXT 25 00 00 00 08 00 00 00 00 7d 48 e0 00 00:49:54.190 READ DMA EXT 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:51.730 READ DMA EXT Error 624 [23] occurred at disk power-on lifetime: 31191 hours (1299 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 06 56 6e 9a e0 00 Error: UNC 256 sectors at LBA = 0x06566e9a = 106327706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 06 56 6e 00 e0 00 00:49:51.730 READ DMA EXT 25 00 00 00 08 00 00 00 00 7d 40 e0 00 00:49:51.718 READ DMA EXT 25 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:51.717 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 10 e0 00 00:49:51.717 READ DMA EXT 35 00 00 00 0c 00 00 06 56 6c e2 e0 00 00:49:51.717 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16 - # 2 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 30/35 Celsius Lifetime Min/Max Temperature: 0/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (380) Index Estimated Time Temperature Celsius 381 2021-02-10 05:05 34 *************** ... ..( 14 skipped). .. *************** 396 2021-02-10 05:20 34 *************** 397 2021-02-10 05:21 33 ************** ... ..( 27 skipped). .. ************** 425 2021-02-10 05:49 33 ************** 426 2021-02-10 05:50 32 ************* ... ..( 58 skipped). .. ************* 7 2021-02-10 06:49 32 ************* 8 2021-02-10 06:50 ? - 9 2021-02-10 06:51 22 *** 10 2021-02-10 06:52 22 *** 11 2021-02-10 06:53 23 **** 12 2021-02-10 06:54 24 ***** 13 2021-02-10 06:55 25 ****** 14 2021-02-10 06:56 25 ****** 15 2021-02-10 06:57 25 ****** 16 2021-02-10 06:58 26 ******* 17 2021-02-10 06:59 26 ******* 18 2021-02-10 07:00 27 ******** 19 2021-02-10 07:01 27 ******** 20 2021-02-10 07:02 28 ********* 21 2021-02-10 07:03 28 ********* 22 2021-02-10 07:04 29 ********** ... ..( 4 skipped). .. ********** 27 2021-02-10 07:09 29 ********** 28 2021-02-10 07:10 30 *********** 29 2021-02-10 07:11 30 *********** 30 2021-02-10 07:12 30 *********** 31 2021-02-10 07:13 31 ************ ... ..( 2 skipped). .. ************ 34 2021-02-10 07:16 31 ************ 35 2021-02-10 07:17 32 ************* ... ..( 12 skipped). .. ************* 48 2021-02-10 07:30 32 ************* 49 2021-02-10 07:31 33 ************** ... ..( 7 skipped). .. ************** 57 2021-02-10 07:39 33 ************** 58 2021-02-10 07:40 34 *************** ... ..( 4 skipped). .. *************** 63 2021-02-10 07:45 34 *************** 64 2021-02-10 07:46 35 **************** ... ..( 40 skipped). .. **************** 105 2021-02-10 08:27 35 **************** 106 2021-02-10 08:28 36 ***************** ... ..( 52 skipped). .. ***************** 159 2021-02-10 09:21 36 ***************** 160 2021-02-10 09:22 35 **************** ... ..( 48 skipped). .. **************** 209 2021-02-10 10:11 35 **************** 210 2021-02-10 10:12 34 *************** 211 2021-02-10 10:13 34 *************** 212 2021-02-10 10:14 35 **************** ... ..( 10 skipped). .. **************** 223 2021-02-10 10:25 35 **************** 224 2021-02-10 10:26 ? - 225 2021-02-10 10:27 30 *********** ... ..( 2 skipped). .. *********** 228 2021-02-10 10:30 30 *********** 229 2021-02-10 10:31 31 ************ 230 2021-02-10 10:32 31 ************ 231 2021-02-10 10:33 32 ************* ... ..( 3 skipped). .. ************* 235 2021-02-10 10:37 32 ************* 236 2021-02-10 10:38 33 ************** 237 2021-02-10 10:39 33 ************** 238 2021-02-10 10:40 33 ************** 239 2021-02-10 10:41 34 *************** ... ..( 9 skipped). .. *************** 249 2021-02-10 10:51 34 *************** 250 2021-02-10 10:52 35 **************** ... ..(109 skipped). .. **************** 360 2021-02-10 12:42 35 **************** 361 2021-02-10 12:43 34 *************** ... ..( 18 skipped). .. *************** 380 2021-02-10 13:02 34 *************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 10539 Vendor specific