/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT0CB6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu May 30 01:06:53 2024 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4800) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 090 090 000 - 47150 12 Power_Cycle_Count -O--CK 098 098 000 - 1898 177 Wear_Leveling_Count PO--C- 092 092 000 - 90 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 046 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 121 241 Total_LBAs_Written -O--CK 099 099 000 - 71833650238 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xde SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/175478 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (96) Index Estimated Time Temperature Celsius 97 2024-05-29 03:50 28 ********* ... ..( 27 skipped). .. ********* 125 2024-05-29 08:30 28 ********* 126 2024-05-29 08:40 29 ********** 127 2024-05-29 08:50 29 ********** 0 2024-05-29 09:00 30 *********** 1 2024-05-29 09:10 29 ********** 2 2024-05-29 09:20 29 ********** 3 2024-05-29 09:30 29 ********** 4 2024-05-29 09:40 28 ********* 5 2024-05-29 09:50 29 ********** ... ..( 4 skipped). .. ********** 10 2024-05-29 10:40 29 ********** 11 2024-05-29 10:50 28 ********* 12 2024-05-29 11:00 29 ********** 13 2024-05-29 11:10 28 ********* 14 2024-05-29 11:20 29 ********** ... ..( 4 skipped). .. ********** 19 2024-05-29 12:10 29 ********** 20 2024-05-29 12:20 28 ********* 21 2024-05-29 12:30 29 ********** 22 2024-05-29 12:40 29 ********** 23 2024-05-29 12:50 28 ********* 24 2024-05-29 13:00 28 ********* 25 2024-05-29 13:10 28 ********* 26 2024-05-29 13:20 29 ********** 27 2024-05-29 13:30 28 ********* 28 2024-05-29 13:40 28 ********* 29 2024-05-29 13:50 29 ********** 30 2024-05-29 14:00 28 ********* 31 2024-05-29 14:10 28 ********* 32 2024-05-29 14:20 28 ********* 33 2024-05-29 14:30 29 ********** 34 2024-05-29 14:40 28 ********* ... ..( 2 skipped). .. ********* 37 2024-05-29 15:10 28 ********* 38 2024-05-29 15:20 29 ********** 39 2024-05-29 15:30 28 ********* ... ..( 2 skipped). .. ********* 42 2024-05-29 16:00 28 ********* 43 2024-05-29 16:10 29 ********** 44 2024-05-29 16:20 28 ********* 45 2024-05-29 16:30 28 ********* 46 2024-05-29 16:40 29 ********** 47 2024-05-29 16:50 28 ********* ... ..( 12 skipped). .. ********* 60 2024-05-29 19:00 28 ********* 61 2024-05-29 19:10 29 ********** 62 2024-05-29 19:20 27 ******** ... ..( 2 skipped). .. ******** 65 2024-05-29 19:50 27 ******** 66 2024-05-29 20:00 28 ********* 67 2024-05-29 20:10 26 ******* 68 2024-05-29 20:20 27 ******** 69 2024-05-29 20:30 28 ********* 70 2024-05-29 20:40 28 ********* 71 2024-05-29 20:50 26 ******* 72 2024-05-29 21:00 27 ******** 73 2024-05-29 21:10 28 ********* 74 2024-05-29 21:20 27 ******** ... ..( 2 skipped). .. ******** 77 2024-05-29 21:50 27 ******** 78 2024-05-29 22:00 28 ********* 79 2024-05-29 22:10 28 ********* 80 2024-05-29 22:20 27 ******** 81 2024-05-29 22:30 27 ******** 82 2024-05-29 22:40 28 ********* 83 2024-05-29 22:50 27 ******** 84 2024-05-29 23:00 26 ******* 85 2024-05-29 23:10 27 ******** 86 2024-05-29 23:20 28 ********* 87 2024-05-29 23:30 27 ******** 88 2024-05-29 23:40 28 ********* 89 2024-05-29 23:50 27 ******** 90 2024-05-30 00:00 27 ******** 91 2024-05-30 00:10 27 ******** 92 2024-05-30 00:20 28 ********* 93 2024-05-30 00:30 26 ******* 94 2024-05-30 00:40 27 ******** 95 2024-05-30 00:50 27 ******** 96 2024-05-30 01:00 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 161 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 134 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD5003ABYX-18WERA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Add. Product Id: DELL(tm) Firmware Version: 01.01S03 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu May 30 01:06:53 2024 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 86) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 142 142 021 - 3883 4 Start_Stop_Count -O--CK 100 100 000 - 36 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 098 000 - 1179 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 35 192 Power-Off_Retract_Count -O--CK 200 200 000 - 28 193 Load_Cycle_Count -O--CK 200 200 000 - 7 194 Temperature_Celsius -O---K 112 108 000 - 31 (Min/Max 26/35) 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7 - # 2 Short offline Completed without error 00% 7 - # 3 Short offline Completed without error 00% 3 - # 4 Extended offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 26/35 Celsius Lifetime Min/Max Temperature: 23/35 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (353) Index Estimated Time Temperature Celsius 354 2024-05-29 17:09 31 ************ ... ..( 17 skipped). .. ************ 372 2024-05-29 17:27 31 ************ 373 2024-05-29 17:28 32 ************* ... ..( 2 skipped). .. ************* 376 2024-05-29 17:31 32 ************* 377 2024-05-29 17:32 31 ************ ... ..( 38 skipped). .. ************ 416 2024-05-29 18:11 31 ************ 417 2024-05-29 18:12 32 ************* ... ..( 2 skipped). .. ************* 420 2024-05-29 18:15 32 ************* 421 2024-05-29 18:16 31 ************ ... ..( 37 skipped). .. ************ 459 2024-05-29 18:54 31 ************ 460 2024-05-29 18:55 32 ************* ... ..( 3 skipped). .. ************* 464 2024-05-29 18:59 32 ************* 465 2024-05-29 19:00 31 ************ ... ..( 31 skipped). .. ************ 19 2024-05-29 19:32 31 ************ 20 2024-05-29 19:33 32 ************* ... ..(161 skipped). .. ************* 182 2024-05-29 22:15 32 ************* 183 2024-05-29 22:16 31 ************ ... ..( 53 skipped). .. ************ 237 2024-05-29 23:10 31 ************ 238 2024-05-29 23:11 32 ************* ... ..( 7 skipped). .. ************* 246 2024-05-29 23:19 32 ************* 247 2024-05-29 23:20 31 ************ ... ..( 21 skipped). .. ************ 269 2024-05-29 23:42 31 ************ 270 2024-05-29 23:43 32 ************* ... ..( 19 skipped). .. ************* 290 2024-05-30 00:03 32 ************* 291 2024-05-30 00:04 31 ************ ... ..( 32 skipped). .. ************ 324 2024-05-30 00:37 31 ************ 325 2024-05-30 00:38 32 ************* ... ..( 8 skipped). .. ************* 334 2024-05-30 00:47 32 ************* 335 2024-05-30 00:48 31 ************ ... ..( 17 skipped). .. ************ 353 2024-05-30 01:06 31 ************ SCT Error Recovery Control: Read: 80 (8.0 seconds) Write: 80 (8.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 108 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 88344041 Vendor specific