Probe #f09ed8b9d2 of ASUSTek TUF Gaming B450M-PLU... Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.4 2023-08-01 r5530 [MidnightBSD 3.2.3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs Device Model: INTEL SSDSC2KB019T8 Serial Number: -- LU WWN Device Id: 5 5cd2e4 ... Firmware Version: XCV10132 User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5671 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 28 10:59:58 2025 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 15038 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2249 (13 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 071 065 000 Old_age Always - 29 (Min/Max 26/36) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 863442 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 317 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 45 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 902319 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2249 (13 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 863442 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 707940 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 2231903 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1 - # 2 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more /dev/ada1 smartctl 7.4 2023-08-01 r5530 [MidnightBSD 3.2.3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7LM1T9HCJM-00003 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: GXT3003Q User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5671 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 28 10:59:58 2025 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6000) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 78304 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 20 177 Wear_Leveling_Count 0x0013 084 084 005 Pre-fail Always - 1151 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 9822 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 062 053 000 Old_age Always - 38 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 202 Exception_Mode_Status 0x0033 100 100 010 Pre-fail Always - 0 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 18 241 Total_LBAs_Written 0x0032 098 098 000 Old_age Always - 3241175056107 242 Total_LBAs_Read 0x0032 098 098 000 Old_age Always - 4209779144498 243 SATA_Downshift_Ct 0x0032 100 100 000 Old_age Always - 0 244 Thermal_Throttle_St 0x0032 100 100 000 Old_age Always - 0 245 Timed_Workld_Media_Wear 0x0032 100 100 000 Old_age Always - 65535 246 Timed_Workld_RdWr_Ratio 0x0032 100 100 000 Old_age Always - 65535 247 Timed_Workld_Timer 0x0032 100 100 000 Old_age Always - 65535 251 NAND_Writes 0x0032 100 100 000 Old_age Always - 4906296121016 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 63425 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more /dev/ada2 smartctl 7.4 2023-08-01 r5530 [MidnightBSD 3.2.3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel/Solidigm S46x0/S45x0 Series SSDs Device Model: INTEL SSDSC2KB019T8 Serial Number: -- LU WWN Device Id: 5 5cd2e4 ... Firmware Version: XCV10132 User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5671 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 28 10:59:58 2025 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 15016 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 12 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2211 (12 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 070 064 000 Old_age Always - 30 (Min/Max 27/36) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 863340 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 317 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 44 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 900995 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2211 (12 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 863340 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 688503 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 2223877 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more /dev/ada3 smartctl 7.4 2023-08-01 r5530 [MidnightBSD 3.2.3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7LM1T9HCJM-00003 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: GXT3003Q User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5671 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 28 10:59:58 2025 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6000) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 77459 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 17 177 Wear_Leveling_Count 0x0013 084 084 005 Pre-fail Always - 1137 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 9840 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 062 052 000 Old_age Always - 38 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 202 Exception_Mode_Status 0x0033 100 100 010 Pre-fail Always - 0 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 16 241 Total_LBAs_Written 0x0032 098 098 000 Old_age Always - 3211730465824 242 Total_LBAs_Read 0x0032 098 098 000 Old_age Always - 4242604442503 243 SATA_Downshift_Ct 0x0032 100 100 000 Old_age Always - 0 244 Thermal_Throttle_St 0x0032 100 100 000 Old_age Always - 0 245 Timed_Workld_Media_Wear 0x0032 100 100 000 Old_age Always - 65535 246 Timed_Workld_RdWr_Ratio 0x0032 100 100 000 Old_age Always - 65535 247 Timed_Workld_Timer 0x0032 100 100 000 Old_age Always - 65535 251 NAND_Writes 0x0032 100 100 000 Old_age Always - 4859222555224 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 62580 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more /dev/nvd0 smartctl 7.4 2023-08-01 r5530 [MidnightBSD 3.2.3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 PRO 512GB Serial Number: -- Firmware Version: 1B2QEXP7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Utilization: 158,773,972,992 [158 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Wed May 28 10:59:58 2025 EDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0037): Security Format Frmw_DL Self_Test Directvs Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 81 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.20W - - 0 0 0 0 0 0 1 + 4.30W - - 1 1 1 1 0 0 2 + 2.10W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 39 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 6% Data Units Read: 106,284,886 [54.4 TB] Data Units Written: 209,994,988 [107 TB] Host Read Commands: 988,442,325 Host Write Commands: 4,575,976,141 Controller Busy Time: 16,471 Power Cycles: 122 Power On Hours: 52,816 Unsafe Shutdowns: 100 Media and Data Integrity Errors: 0 Error Information Log Entries: 3 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 39 Celsius Temperature Sensor 2: 55 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code 0 Short Completed without error 31562 - - - - -


Hardware for Linux and BSD

GitHub