/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD5003AZEX-00MK2A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 20 09:41:28 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 62) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 8 3 Spin_Up_Time POS--K 173 173 021 - 2308 4 Start_Stop_Count -O--CK 100 100 000 - 176 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 004 004 000 - 70715 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 176 192 Power-Off_Retract_Count -O--CK 200 200 000 - 149 193 Load_Cycle_Count -O--CK 199 199 000 - 4041 194 Temperature_Celsius -O---K 110 094 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 8 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8 [7] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 2f 40 00 Error: UNC at LBA = 0xa4006f392f = 704381925679 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 2f 40 00 23d+13:04:21.147 READ VERIFY SECTOR(S) EXT 61 00 01 00 08 00 a4 00 6f 39 2e 40 00 23d+13:04:21.147 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e0 40 00 23d+13:04:21.147 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 6f 39 2e 40 00 23d+13:04:21.072 READ VERIFY SECTOR(S) EXT 61 00 01 00 08 00 a4 00 6f 39 2d 40 00 23d+13:04:21.072 WRITE FPDMA QUEUED Error 7 [6] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 2e 40 00 Error: UNC at LBA = 0xa4006f392e = 704381925678 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 2e 40 00 23d+13:04:21.072 READ VERIFY SECTOR(S) EXT 61 00 01 00 08 00 a4 00 6f 39 2d 40 00 23d+13:04:21.072 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e8 40 00 23d+13:04:21.072 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 6f 39 2d 40 00 23d+13:04:20.997 READ VERIFY SECTOR(S) EXT 61 00 01 00 08 00 a4 00 6f 39 2c 40 00 23d+13:04:20.997 WRITE FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 2d 40 00 Error: UNC at LBA = 0xa4006f392d = 704381925677 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 2d 40 00 23d+13:04:20.997 READ VERIFY SECTOR(S) EXT 61 00 01 00 08 00 a4 00 6f 39 2c 40 00 23d+13:04:20.997 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e0 40 00 23d+13:04:20.997 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 6f 39 2c 40 00 23d+13:04:20.925 READ VERIFY SECTOR(S) EXT 61 00 01 00 00 00 a4 00 6f 39 2b 40 00 23d+13:04:20.925 WRITE FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 2c 40 00 Error: UNC at LBA = 0xa4006f392c = 704381925676 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 2c 40 00 23d+13:04:20.925 READ VERIFY SECTOR(S) EXT 61 00 01 00 00 00 a4 00 6f 39 2b 40 00 23d+13:04:20.925 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 6f 39 2b 40 00 23d+13:04:20.900 READ VERIFY SECTOR(S) EXT 61 00 01 00 00 00 a4 00 6f 39 2a 40 00 23d+13:04:20.856 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 6f 39 2a 40 00 23d+13:04:20.830 READ VERIFY SECTOR(S) EXT Error 4 [3] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 2b 40 00 Error: UNC at LBA = 0xa4006f392b = 704381925675 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 2b 40 00 23d+13:04:20.900 READ VERIFY SECTOR(S) EXT 61 00 01 00 00 00 a4 00 6f 39 2a 40 00 23d+13:04:20.856 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 6f 39 2a 40 00 23d+13:04:20.830 READ VERIFY SECTOR(S) EXT 61 00 08 00 00 00 2f 00 81 00 e8 40 00 23d+13:04:20.315 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e0 40 00 23d+13:04:20.315 WRITE FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 2a 40 00 Error: UNC at LBA = 0xa4006f392a = 704381925674 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 2a 40 00 23d+13:04:20.830 READ VERIFY SECTOR(S) EXT 61 00 08 00 00 00 2f 00 81 00 e8 40 00 23d+13:04:20.315 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e0 40 00 23d+13:04:20.315 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e8 40 00 23d+13:04:20.314 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e0 40 00 23d+13:04:20.314 WRITE FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 6f 39 29 40 00 Error: UNC at LBA = 0xa4006f3929 = 704381925673 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 6f 39 29 40 00 23d+13:04:10.031 READ VERIFY SECTOR(S) EXT 61 00 01 00 00 00 a4 00 6f 39 28 40 00 23d+13:04:10.031 WRITE FPDMA QUEUED 61 00 30 00 00 00 30 00 0a 00 08 40 00 23d+13:04:10.018 WRITE FPDMA QUEUED 61 00 08 00 00 00 60 00 13 03 c8 40 00 23d+13:04:10.012 WRITE FPDMA QUEUED 42 00 00 40 00 00 a4 00 40 39 00 40 00 23d+13:04:05.832 READ VERIFY SECTOR(S) EXT Error 1 [0] occurred at disk power-on lifetime: 3344 hours (139 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 40 00 00 a4 00 40 39 00 40 00 Error: UNC at LBA = 0xa400403900 = 704378845440 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 40 00 00 a4 00 40 39 00 40 00 23d+13:04:05.832 READ VERIFY SECTOR(S) EXT 61 00 08 00 00 00 2f 00 81 00 e8 40 00 23d+13:04:05.772 WRITE FPDMA QUEUED 61 00 08 00 00 00 60 00 13 03 c8 40 00 23d+13:04:05.772 WRITE FPDMA QUEUED 61 00 08 00 00 00 2f 00 81 00 e0 40 00 23d+13:04:05.142 WRITE FPDMA QUEUED 61 00 08 00 00 00 30 00 0a 00 00 40 00 23d+13:04:05.142 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 31/33 Celsius Lifetime Min/Max Temperature: 0/49 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (117) Index Estimated Time Temperature Celsius 118 2024-03-20 01:44 37 ****************** ... ..( 24 skipped). .. ****************** 143 2024-03-20 02:09 37 ****************** 144 2024-03-20 02:10 36 ***************** ... ..(252 skipped). .. ***************** 397 2024-03-20 06:23 36 ***************** 398 2024-03-20 06:24 37 ****************** ... ..( 13 skipped). .. ****************** 412 2024-03-20 06:38 37 ****************** 413 2024-03-20 06:39 ? - 414 2024-03-20 06:40 23 **** 415 2024-03-20 06:41 ? - 416 2024-03-20 06:42 24 ***** 417 2024-03-20 06:43 24 ***** 418 2024-03-20 06:44 24 ***** 419 2024-03-20 06:45 25 ****** 420 2024-03-20 06:46 26 ******* 421 2024-03-20 06:47 ? - 422 2024-03-20 06:48 28 ********* ... ..( 2 skipped). .. ********* 425 2024-03-20 06:51 28 ********* 426 2024-03-20 06:52 29 ********** 427 2024-03-20 06:53 29 ********** 428 2024-03-20 06:54 ? - 429 2024-03-20 06:55 31 ************ ... ..( 2 skipped). .. ************ 432 2024-03-20 06:58 31 ************ 433 2024-03-20 06:59 32 ************* ... ..( 2 skipped). .. ************* 436 2024-03-20 07:02 32 ************* 437 2024-03-20 07:03 33 ************** ... ..( 11 skipped). .. ************** 449 2024-03-20 07:15 33 ************** 450 2024-03-20 07:16 37 ****************** ... ..(144 skipped). .. ****************** 117 2024-03-20 09:41 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1400 Vendor specific /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 (CMR) Device Model: TOSHIBA HDWD110 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA8R0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 20 09:41:28 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6973) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 117) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 142 142 054 - 70 3 Spin_Up_Time POS--- 113 113 024 - 200 (Average 206) 4 Start_Stop_Count -O--C- 100 100 000 - 185 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 118 118 020 - 33 9 Power_On_Hours -O--C- 099 099 000 - 12962 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 185 192 Power-Off_Retract_Count -O--CK 100 100 000 - 203 193 Load_Cycle_Count -O--C- 100 100 000 - 203 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 15/43) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 32/34 Celsius Lifetime Min/Max Temperature: 15/43 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (17) Index Estimated Time Temperature Celsius 18 2024-03-20 07:34 37 ****************** ... ..( 85 skipped). .. ****************** 104 2024-03-20 09:00 37 ****************** 105 2024-03-20 09:01 38 ******************* 106 2024-03-20 09:02 37 ****************** ... ..( 6 skipped). .. ****************** 113 2024-03-20 09:09 37 ****************** 114 2024-03-20 09:10 38 ******************* 115 2024-03-20 09:11 ? - 116 2024-03-20 09:12 ? - 117 2024-03-20 09:13 26 ******* 118 2024-03-20 09:14 26 ******* 119 2024-03-20 09:15 27 ******** 120 2024-03-20 09:16 28 ********* 121 2024-03-20 09:17 28 ********* 122 2024-03-20 09:18 ? - 123 2024-03-20 09:19 32 ************* 124 2024-03-20 09:20 32 ************* 125 2024-03-20 09:21 32 ************* 126 2024-03-20 09:22 33 ************** ... ..( 3 skipped). .. ************** 2 2024-03-20 09:26 33 ************** 3 2024-03-20 09:27 34 *************** ... ..( 13 skipped). .. *************** 17 2024-03-20 09:41 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 185 --- Lifetime Power-On Resets 0x01 0x010 4 12962 --- Power-on Hours 0x01 0x018 6 13439031893 --- Logical Sectors Written 0x01 0x020 6 227377497 --- Number of Write Commands 0x01 0x028 6 80197785068 --- Logical Sectors Read 0x01 0x030 6 132697772 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 12960 --- Spindle Motor Power-on Hours 0x03 0x010 4 12960 --- Head Flying Hours 0x03 0x018 4 203 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 30 --- Read Recovery Attempts 0x03 0x030 4 9 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 37 N-- Average Short Term Temperature 0x05 0x018 1 36 N-- Average Long Term Temperature 0x05 0x020 1 43 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 41 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 956 --- Number of Hardware Resets 0x06 0x010 4 656 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS