/dev/sd0c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs Device Model: Crucial_CT256MX100SSD1 Serial Number: -- LU WWN Device Id: 5 00a075 ... Firmware Version: MU02 User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Apr 17 22:37:03 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1190) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 3) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 27 5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5356 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3976 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 098 098 000 Old_age Always - 74 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 2495 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 2159 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 076 056 000 Old_age Always - 24 (Min/Max 8/44) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Percent_Lifetime_Remain 0x0031 098 098 000 Pre-fail Offline - 2 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 21809870133 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 684872739 248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 839424514 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 4898 - # 2 Vendor (0xff) Completed without error 00% 4868 - # 3 Vendor (0xff) Completed without error 00% 4764 - # 4 Vendor (0xff) Completed without error 00% 4651 - # 5 Vendor (0xff) Completed without error 00% 4379 - # 6 Vendor (0xff) Completed without error 00% 4020 - # 7 Vendor (0xff) Completed without error 00% 3584 - # 8 Vendor (0xff) Completed without error 00% 3113 - # 9 Vendor (0xff) Completed without error 00% 2898 - #10 Vendor (0xff) Completed without error 00% 2731 - #11 Vendor (0xff) Completed without error 00% 2667 - #12 Vendor (0xff) Completed without error 00% 2632 - #13 Vendor (0xff) Completed without error 00% 2604 - #14 Vendor (0xff) Completed without error 00% 2319 - #15 Vendor (0xff) Completed without error 00% 2147 - #16 Vendor (0xff) Completed without error 00% 2038 - #17 Vendor (0xff) Completed without error 00% 2023 - #18 Vendor (0xff) Completed without error 00% 2009 - #19 Vendor (0xff) Completed without error 00% 1785 - #20 Vendor (0xff) Completed without error 00% 1750 - #21 Vendor (0xff) Completed without error 00% 1029 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.