/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Apacer AS340/350 SSDs Device Model: Apacer AS350 128GB Serial Number: -- Firmware Version: T1125A0 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Oct 18 16:00:57 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 8106 12 Power_Cycle_Count -O--CK 100 100 050 - 1097 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute PO--CK 100 100 050 - 100 163 Max_Erase_Count -O--CK 100 100 050 - 11 164 Average_Erase_Count -O--CK 100 100 050 - 59228 165 Unknown_Attribute -O--CK 100 100 050 - 162 166 Later_Bad_Block_Count -O--CK 100 100 050 - 75 167 SSD_Protect_Mode -O--CK 100 100 050 - 120 168 SATA_PHY_Error_Count -O--CK 100 100 050 - 7000 169 Unknown_Attribute -O--CK 100 100 050 - 99 175 Bad_Cluster_Table_Count -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 458 194 Temperature_Celsius -O---K 100 100 050 - 48 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written ----CK 100 100 050 - 122939 242 Total_LBAs_Read ----CK 100 100 050 - 51462 245 Unknown_Attribute -O--CK 100 100 050 - 122371 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6042 - # 2 Extended offline Completed without error 00% 5738 - # 3 Extended offline Completed without error 00% 5643 - # 4 Extended offline Completed without error 00% 5516 - # 5 Extended offline Completed without error 00% 5359 - # 6 Extended offline Completed without error 00% 5037 - # 7 Extended offline Completed without error 00% 3336 - # 8 Extended offline Completed without error 00% 3227 - # 9 Extended offline Completed without error 00% 3173 - #10 Extended offline Completed without error 00% 3047 - #11 Extended offline Completed without error 00% 2927 - #12 Extended offline Completed without error 00% 2003 - #13 Extended offline Completed without error 00% 1872 - #14 Extended offline Completed without error 00% 1678 - #15 Extended offline Completed without error 00% 1506 - #16 Extended offline Completed without error 00% 1430 - #17 Extended offline Completed without error 00% 752 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1097 --- Lifetime Power-On Resets 0x01 0x010 4 8106 --- Power-on Hours 0x01 0x018 6 3761973643 --- Logical Sectors Written 0x01 0x020 6 274652 --- Number of Write Commands 0x01 0x028 6 3372670261 --- Logical Sectors Read 0x01 0x030 6 138329 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 2 R_ERR response for non-data FIS 0x000a 4 14 Device-to-host register FISes sent due to a COMRESET /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD3200BPVT-80ZEST0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Oct 18 16:00:57 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7560) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 91) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 191 051 - 18 3 Spin_Up_Time POS--K 151 128 021 - 1450 4 Start_Stop_Count -O--CK 078 078 000 - 22021 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12893 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5112 191 G-Sense_Error_Rate -O--CK 001 001 000 - 57626 192 Power-Off_Retract_Count -O--CK 199 199 000 - 973 193 Load_Cycle_Count -O--CK 081 081 000 - 359011 194 Temperature_Celsius -O---K 112 087 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1101 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1101 [20] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 e0 00 00 00 5f eb 6f 40 00 00:01:19.864 READ FPDMA QUEUED 60 00 01 00 d8 00 00 06 1a 79 66 40 00 00:01:19.382 READ FPDMA QUEUED 60 00 01 00 d0 00 00 00 00 00 00 40 00 00:01:19.382 READ FPDMA QUEUED 60 00 01 00 c0 00 00 00 00 00 00 40 00 00:01:19.382 READ FPDMA QUEUED 60 00 01 00 b8 00 00 00 00 00 00 40 00 00:01:19.377 READ FPDMA QUEUED Error 1100 [19] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 00 00 5f eb 6f 40 00 00:01:16.586 READ FPDMA QUEUED 60 00 01 00 a0 00 00 06 1a 79 66 40 00 00:01:16.097 READ FPDMA QUEUED 60 00 01 00 98 00 00 00 00 00 00 40 00 00:01:16.097 READ FPDMA QUEUED 60 00 01 00 88 00 00 00 00 00 00 40 00 00:01:16.096 READ FPDMA QUEUED 60 00 01 00 80 00 00 00 00 00 00 40 00 00:01:16.091 READ FPDMA QUEUED Error 1099 [18] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 70 00 00 00 5f eb 6f 40 00 00:01:13.308 READ FPDMA QUEUED 60 00 01 00 68 00 00 06 1a 79 66 40 00 00:01:12.822 READ FPDMA QUEUED 60 00 01 00 60 00 00 00 00 00 00 40 00 00:01:12.822 READ FPDMA QUEUED 60 00 01 00 50 00 00 00 00 00 00 40 00 00:01:12.822 READ FPDMA QUEUED 60 00 01 00 48 00 00 00 00 00 00 40 00 00:01:12.817 READ FPDMA QUEUED Error 1098 [17] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 38 00 00 00 5f eb 6f 40 00 00:01:10.030 READ FPDMA QUEUED 60 00 01 00 30 00 00 06 1a 79 66 40 00 00:01:09.536 READ FPDMA QUEUED 60 00 01 00 28 00 00 00 00 00 00 40 00 00:01:09.531 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:09.531 READ LOG EXT 60 00 01 00 10 00 00 00 00 00 00 40 00 00:01:06.740 READ FPDMA QUEUED Error 1097 [16] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 10 00 00 00 00 00 00 40 00 00:01:06.740 READ FPDMA QUEUED 60 00 01 00 08 00 00 00 00 00 00 40 00 00:01:06.734 READ FPDMA QUEUED 60 00 08 00 00 00 00 00 5f eb 6f 40 00 00:01:06.734 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:06.733 READ LOG EXT 60 00 08 00 f0 00 00 00 5f eb 6f 40 00 00:01:03.942 READ FPDMA QUEUED Error 1096 [15] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 f0 00 00 00 5f eb 6f 40 00 00:01:03.942 READ FPDMA QUEUED 60 00 01 00 e8 00 00 06 1a 79 66 40 00 00:01:03.454 READ FPDMA QUEUED 60 00 01 00 e0 00 00 00 00 00 00 40 00 00:01:03.454 READ FPDMA QUEUED 60 00 01 00 d0 00 00 00 00 00 00 40 00 00:01:03.453 READ FPDMA QUEUED 60 00 01 00 c8 00 00 00 00 00 00 40 00 00:01:03.448 READ FPDMA QUEUED Error 1095 [14] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b8 00 00 00 5f eb 6f 40 00 00:01:00.665 READ FPDMA QUEUED 60 00 01 00 b0 00 00 06 1a 79 66 40 00 00:01:00.179 READ FPDMA QUEUED 60 00 01 00 a8 00 00 00 00 00 00 40 00 00:01:00.179 READ FPDMA QUEUED 60 00 01 00 98 00 00 00 00 00 00 40 00 00:01:00.179 READ FPDMA QUEUED 60 00 01 00 90 00 00 00 00 00 00 40 00 00:01:00.174 READ FPDMA QUEUED Error 1094 [13] occurred at disk power-on lifetime: 5333 hours (222 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f eb 6f 40 00 Error: UNC at LBA = 0x005feb6f = 6286191 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 80 00 00 00 5f eb 6f 40 00 00:00:57.340 READ FPDMA QUEUED 60 00 01 00 78 00 00 06 1a 79 66 40 00 00:00:56.860 READ FPDMA QUEUED 60 00 01 00 70 00 00 00 00 00 00 40 00 00:00:56.860 READ FPDMA QUEUED 60 00 01 00 60 00 00 00 00 00 00 40 00 00:00:56.860 READ FPDMA QUEUED 60 00 01 00 58 00 00 00 00 00 00 40 00 00:00:56.855 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 11520 - # 2 Extended offline Completed without error 00% 11221 - # 3 Extended offline Completed without error 00% 11177 - # 4 Extended offline Completed without error 00% 11044 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 26/31 Celsius Lifetime Min/Max Temperature: 22/56 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (122) Index Estimated Time Temperature Celsius 123 2023-10-18 13:53 32 ************* ... ..( 2 skipped). .. ************* 126 2023-10-18 13:56 32 ************* 127 2023-10-18 13:57 ? - 0 2023-10-18 13:58 32 ************* 1 2023-10-18 13:59 ? - 2 2023-10-18 14:00 24 ***** 3 2023-10-18 14:01 25 ****** 4 2023-10-18 14:02 ? - 5 2023-10-18 14:03 26 ******* 6 2023-10-18 14:04 25 ****** 7 2023-10-18 14:05 26 ******* ... ..( 2 skipped). .. ******* 10 2023-10-18 14:08 26 ******* 11 2023-10-18 14:09 27 ******** 12 2023-10-18 14:10 26 ******* 13 2023-10-18 14:11 26 ******* 14 2023-10-18 14:12 26 ******* 15 2023-10-18 14:13 27 ******** ... ..( 9 skipped). .. ******** 25 2023-10-18 14:23 27 ******** 26 2023-10-18 14:24 28 ********* ... ..( 5 skipped). .. ********* 32 2023-10-18 14:30 28 ********* 33 2023-10-18 14:31 29 ********** 34 2023-10-18 14:32 28 ********* 35 2023-10-18 14:33 28 ********* 36 2023-10-18 14:34 28 ********* 37 2023-10-18 14:35 29 ********** ... ..( 6 skipped). .. ********** 44 2023-10-18 14:42 29 ********** 45 2023-10-18 14:43 30 *********** 46 2023-10-18 14:44 29 ********** 47 2023-10-18 14:45 29 ********** 48 2023-10-18 14:46 30 *********** 49 2023-10-18 14:47 30 *********** 50 2023-10-18 14:48 ? - 51 2023-10-18 14:49 30 *********** 52 2023-10-18 14:50 ? - 53 2023-10-18 14:51 26 ******* 54 2023-10-18 14:52 ? - 55 2023-10-18 14:53 27 ******** 56 2023-10-18 14:54 27 ******** 57 2023-10-18 14:55 ? - 58 2023-10-18 14:56 27 ******** ... ..( 2 skipped). .. ******** 61 2023-10-18 14:59 27 ******** 62 2023-10-18 15:00 ? - 63 2023-10-18 15:01 27 ******** ... ..( 2 skipped). .. ******** 66 2023-10-18 15:04 27 ******** 67 2023-10-18 15:05 ? - 68 2023-10-18 15:06 27 ******** 69 2023-10-18 15:07 ? - 70 2023-10-18 15:08 28 ********* 71 2023-10-18 15:09 27 ******** 72 2023-10-18 15:10 28 ********* 73 2023-10-18 15:11 28 ********* 74 2023-10-18 15:12 28 ********* 75 2023-10-18 15:13 ? - 76 2023-10-18 15:14 28 ********* ... ..( 5 skipped). .. ********* 82 2023-10-18 15:20 28 ********* 83 2023-10-18 15:21 29 ********** 84 2023-10-18 15:22 28 ********* 85 2023-10-18 15:23 29 ********** 86 2023-10-18 15:24 28 ********* 87 2023-10-18 15:25 29 ********** 88 2023-10-18 15:26 29 ********** 89 2023-10-18 15:27 29 ********** 90 2023-10-18 15:28 30 *********** 91 2023-10-18 15:29 30 *********** 92 2023-10-18 15:30 29 ********** 93 2023-10-18 15:31 30 *********** ... ..( 18 skipped). .. *********** 112 2023-10-18 15:50 30 *********** 113 2023-10-18 15:51 31 ************ 114 2023-10-18 15:52 31 ************ 115 2023-10-18 15:53 30 *********** 116 2023-10-18 15:54 30 *********** 117 2023-10-18 15:55 31 ************ 118 2023-10-18 15:56 ? - 119 2023-10-18 15:57 31 ************ 120 2023-10-18 15:58 31 ************ 121 2023-10-18 15:59 ? - 122 2023-10-18 16:00 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 3326 Vendor specific