/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p12-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 7K500 Device Model: Hitachi HTS725025A9A364 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: PC2OCH0A User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Feb 10 22:41:42 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 67) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 092 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 253 100 033 - 1 4 Start_Stop_Count -O--CK 100 100 000 - 919 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 2 (0 1) 7 Seek_Error_Rate POSR-K 100 099 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1133 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 893 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 20293723422783 188 Command_Timeout -O--CK 099 094 000 - 4295163921 190 Airflow_Temperature_Cel -O---K 069 043 045 Past 31 (Min/Max 15/32) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 43 192 Power-Off_Retract_Count -O--CK 099 099 000 - 13959381 193 Load_Cycle_Count -O--CK 088 088 000 - 129474 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 15/32 Celsius Lifetime Min/Max Temperature: -4/57 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 478 (168) Index Estimated Time Temperature Celsius 169 2021-02-10 14:44 32 ************* ... ..( 88 skipped). .. ************* 258 2021-02-10 16:13 32 ************* 259 2021-02-10 16:14 15 - 260 2021-02-10 16:15 15 - 261 2021-02-10 16:16 16 - 262 2021-02-10 16:17 17 - 263 2021-02-10 16:18 18 - 264 2021-02-10 16:19 18 - 265 2021-02-10 16:20 19 - 266 2021-02-10 16:21 19 - 267 2021-02-10 16:22 20 * 268 2021-02-10 16:23 21 ** 269 2021-02-10 16:24 22 *** 270 2021-02-10 16:25 22 *** 271 2021-02-10 16:26 22 *** 272 2021-02-10 16:27 23 **** 273 2021-02-10 16:28 23 **** 274 2021-02-10 16:29 23 **** 275 2021-02-10 16:30 24 ***** 276 2021-02-10 16:31 24 ***** 277 2021-02-10 16:32 24 ***** 278 2021-02-10 16:33 25 ****** 279 2021-02-10 16:34 25 ****** 280 2021-02-10 16:35 25 ****** 281 2021-02-10 16:36 26 ******* ... ..( 2 skipped). .. ******* 284 2021-02-10 16:39 26 ******* 285 2021-02-10 16:40 27 ******** ... ..( 5 skipped). .. ******** 291 2021-02-10 16:46 27 ******** 292 2021-02-10 16:47 28 ********* ... ..( 5 skipped). .. ********* 298 2021-02-10 16:53 28 ********* 299 2021-02-10 16:54 29 ********** ... ..( 7 skipped). .. ********** 307 2021-02-10 17:02 29 ********** 308 2021-02-10 17:03 30 *********** ... ..( 13 skipped). .. *********** 322 2021-02-10 17:17 30 *********** 323 2021-02-10 17:18 31 ************ ... ..( 47 skipped). .. ************ 371 2021-02-10 18:06 31 ************ 372 2021-02-10 18:07 32 ************* 373 2021-02-10 18:08 31 ************ 374 2021-02-10 18:09 32 ************* ... ..( 33 skipped). .. ************* 408 2021-02-10 18:43 32 ************* 409 2021-02-10 18:44 31 ************ ... ..( 27 skipped). .. ************ 437 2021-02-10 19:12 31 ************ 438 2021-02-10 19:13 32 ************* 439 2021-02-10 19:14 32 ************* 440 2021-02-10 19:15 31 ************ ... ..( 3 skipped). .. ************ 444 2021-02-10 19:19 31 ************ 445 2021-02-10 19:20 32 ************* ... ..(199 skipped). .. ************* 167 2021-02-10 22:40 32 ************* 168 2021-02-10 22:41 31 ************ SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS