/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EARX-00ZUDB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 17 12:45:43 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (36780) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 355) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 233 225 021 - 7316 4 Start_Stop_Count -O--CK 100 100 000 - 74 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 1 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 026 026 000 - 54406 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 71 192 Power-Off_Retract_Count -O--CK 200 200 000 - 57 193 Load_Cycle_Count -O--CK 001 001 000 - 6896787 194 Temperature_Celsius -O---K 118 103 000 - 32 196 Reallocated_Event_Count -O--CK 199 199 000 - 1 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 3 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 104 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 104 [7] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 00 00 00 11 00 40 00 00:08:33.775 READ FPDMA QUEUED 60 00 04 00 00 00 00 e8 e0 88 71 40 00 00:08:33.752 READ FPDMA QUEUED 60 00 01 00 00 00 00 e8 e0 88 af 40 00 00:08:33.751 READ FPDMA QUEUED 60 00 01 00 00 00 00 e8 e0 88 af 40 00 00:08:33.751 READ FPDMA QUEUED 60 01 00 00 08 00 00 00 00 10 00 40 00 00:08:33.734 READ FPDMA QUEUED Error 103 [6] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 00 e1 00 0f 00 40 00 00:07:58.240 READ FPDMA QUEUED 60 01 00 00 10 00 00 e1 00 0d 00 40 00 00:07:58.240 READ FPDMA QUEUED 60 01 00 00 08 00 00 00 00 13 00 40 00 00:07:58.237 READ FPDMA QUEUED 60 00 f8 00 00 00 00 00 00 11 08 40 00 00:07:58.237 READ FPDMA QUEUED 60 00 02 00 18 00 00 00 00 11 06 40 00 00:07:58.237 READ FPDMA QUEUED Error 102 [5] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 00 00 11 00 40 00 00:07:54.459 READ FPDMA QUEUED 60 01 00 00 00 00 00 00 00 10 00 40 00 00:07:54.452 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 00:07:54.448 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:54.444 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 00 00:07:54.399 FLUSH CACHE EXT Error 101 [4] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 12 00 38 00 00 e1 00 0f ee 40 00 00:07:50.480 READ FPDMA QUEUED 60 00 04 00 30 00 00 e1 00 0f ea 40 00 00:07:50.480 READ FPDMA QUEUED 60 00 1e 00 28 00 00 e1 00 0f cc 40 00 00:07:50.480 READ FPDMA QUEUED 60 00 04 00 20 00 00 e1 00 0f c8 40 00 00:07:50.480 READ FPDMA QUEUED 60 00 1e 00 18 00 00 e1 00 0f aa 40 00 00:07:50.480 READ FPDMA QUEUED Error 100 [3] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 00 00 11 00 40 00 00:07:46.689 READ FPDMA QUEUED 60 01 00 00 00 00 00 00 00 10 00 40 00 00:07:46.681 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 00:07:46.677 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:46.673 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 00 00:07:45.382 FLUSH CACHE EXT Error 99 [2] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 00 00 11 00 40 00 00:07:41.927 READ FPDMA QUEUED 60 01 00 00 00 00 00 00 00 10 00 40 00 00:07:41.915 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 00:07:41.910 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:41.906 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 00 00:07:41.886 FLUSH CACHE EXT Error 98 [1] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 00 00 11 00 40 00 00:07:38.486 READ FPDMA QUEUED 60 01 00 00 00 00 00 00 00 10 00 40 00 00:07:38.462 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 00:07:38.458 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:38.454 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 00 00:07:38.453 FLUSH CACHE EXT Error 97 [0] occurred at disk power-on lifetime: 5728 hours (238 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 11 30 40 00 Error: UNC at LBA = 0x00001130 = 4400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 00 00 11 00 40 00 00:07:34.723 READ FPDMA QUEUED 60 01 00 00 00 00 00 00 00 10 00 40 00 00:07:34.698 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 00:07:34.694 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:07:34.690 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 00 00 00 40 00 00:07:34.689 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 31384 - # 2 Short offline Completed without error 00% 31361 - # 3 Short offline Completed without error 00% 31337 - # 4 Short offline Completed without error 00% 31313 - # 5 Short offline Completed without error 00% 31289 - # 6 Extended offline Completed without error 00% 31272 - # 7 Short offline Completed without error 00% 31265 - # 8 Short offline Completed without error 00% 31241 - # 9 Short offline Completed without error 00% 31217 - #10 Short offline Completed without error 00% 31193 - #11 Short offline Completed without error 00% 31169 - #12 Extended offline Completed without error 00% 31145 - #13 Short offline Completed without error 00% 31138 - #14 Short offline Completed without error 00% 31114 - #15 Short offline Completed without error 00% 31090 - #16 Short offline Completed without error 00% 31066 - #17 Short offline Completed without error 00% 31042 - #18 Short offline Completed without error 00% 31018 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 27/32 Celsius Lifetime Min/Max Temperature: 0/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (271) Index Estimated Time Temperature Celsius 272 2021-03-17 04:48 30 *********** ... ..( 88 skipped). .. *********** 361 2021-03-17 06:17 30 *********** 362 2021-03-17 06:18 31 ************ ... ..( 7 skipped). .. ************ 370 2021-03-17 06:26 31 ************ 371 2021-03-17 06:27 32 ************* ... ..( 9 skipped). .. ************* 381 2021-03-17 06:37 32 ************* 382 2021-03-17 06:38 30 *********** ... ..(366 skipped). .. *********** 271 2021-03-17 12:45 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 771190 Vendor specific