/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-STABLE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar Z5K1000 Device Model: HGST HTS541075A7E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: SE2OA4A0 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 24 11:39:48 2020 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 169) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 123 100 033 - 1 4 Start_Stop_Count -O--CK 099 099 000 - 2525 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 076 076 000 - 10919 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2412 183 Runtime_Bad_Block -O--CK 100 100 001 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 196610 190 Airflow_Temperature_Cel -O---K 070 045 045 Past 30 (Min/Max 24/30) 191 G-Sense_Error_Rate -O--CK 094 094 000 - 1597 192 Power-Off_Retract_Count -O--CK 100 100 000 - 3014702 193 Load_Cycle_Count -O--CK 079 079 000 - 211939 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 083 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10916 - # 2 Short offline Completed without error 00% 10915 - # 3 Short offline Completed without error 00% 10914 - # 4 Short offline Completed without error 00% 10907 - # 5 Short offline Completed without error 00% 10895 - # 6 Short offline Completed without error 00% 10892 - # 7 Short offline Completed without error 00% 10891 - # 8 Short offline Completed without error 00% 10887 - # 9 Short offline Completed without error 00% 10857 - #10 Short offline Completed without error 00% 10851 - #11 Short offline Completed without error 00% 10843 - #12 Short offline Completed without error 00% 10833 - #13 Extended offline Completed without error 00% 10832 - #14 Short offline Completed without error 00% 10819 - #15 Short offline Completed without error 00% 10817 - #16 Short offline Completed without error 00% 10816 - #17 Short offline Completed without error 00% 10813 - #18 Short offline Completed without error 00% 10801 - #19 Short offline Completed without error 00% 10799 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 24/30 Celsius Lifetime Min/Max Temperature: 8/55 Celsius Specified Max Operating Temperature: 38 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (17) Index Estimated Time Temperature Celsius 18 2020-05-24 09:32 34 *************** ... ..( 3 skipped). .. *************** 22 2020-05-24 09:36 34 *************** 23 2020-05-24 09:37 35 **************** ... ..( 10 skipped). .. **************** 34 2020-05-24 09:48 35 **************** 35 2020-05-24 09:49 36 ***************** ... ..( 2 skipped). .. ***************** 38 2020-05-24 09:52 36 ***************** 39 2020-05-24 09:53 37 ****************** ... ..( 9 skipped). .. ****************** 49 2020-05-24 10:03 37 ****************** 50 2020-05-24 10:04 38 ******************* 51 2020-05-24 10:05 38 ******************* 52 2020-05-24 10:06 37 ****************** 53 2020-05-24 10:07 38 ******************* ... ..( 8 skipped). .. ******************* 62 2020-05-24 10:16 38 ******************* 63 2020-05-24 10:17 ? - 64 2020-05-24 10:18 23 **** 65 2020-05-24 10:19 24 ***** 66 2020-05-24 10:20 25 ****** 67 2020-05-24 10:21 26 ******* 68 2020-05-24 10:22 27 ******** 69 2020-05-24 10:23 28 ********* 70 2020-05-24 10:24 28 ********* 71 2020-05-24 10:25 29 ********** 72 2020-05-24 10:26 29 ********** 73 2020-05-24 10:27 30 *********** 74 2020-05-24 10:28 31 ************ 75 2020-05-24 10:29 31 ************ 76 2020-05-24 10:30 31 ************ 77 2020-05-24 10:31 32 ************* 78 2020-05-24 10:32 32 ************* 79 2020-05-24 10:33 33 ************** 80 2020-05-24 10:34 33 ************** 81 2020-05-24 10:35 33 ************** 82 2020-05-24 10:36 34 *************** ... ..( 2 skipped). .. *************** 85 2020-05-24 10:39 34 *************** 86 2020-05-24 10:40 35 **************** ... ..( 2 skipped). .. **************** 89 2020-05-24 10:43 35 **************** 90 2020-05-24 10:44 36 ***************** ... ..( 10 skipped). .. ***************** 101 2020-05-24 10:55 36 ***************** 102 2020-05-24 10:56 37 ****************** 103 2020-05-24 10:57 ? - 104 2020-05-24 10:58 25 ****** 105 2020-05-24 10:59 26 ******* 106 2020-05-24 11:00 27 ******** 107 2020-05-24 11:01 28 ********* 108 2020-05-24 11:02 28 ********* 109 2020-05-24 11:03 29 ********** 110 2020-05-24 11:04 30 *********** 111 2020-05-24 11:05 30 *********** 112 2020-05-24 11:06 31 ************ 113 2020-05-24 11:07 31 ************ 114 2020-05-24 11:08 32 ************* 115 2020-05-24 11:09 32 ************* 116 2020-05-24 11:10 33 ************** 117 2020-05-24 11:11 33 ************** 118 2020-05-24 11:12 33 ************** 119 2020-05-24 11:13 ? - 120 2020-05-24 11:14 27 ******** 121 2020-05-24 11:15 27 ******** 122 2020-05-24 11:16 28 ********* 123 2020-05-24 11:17 29 ********** 124 2020-05-24 11:18 29 ********** 125 2020-05-24 11:19 30 *********** 126 2020-05-24 11:20 ? - 127 2020-05-24 11:21 31 ************ 0 2020-05-24 11:22 31 ************ 1 2020-05-24 11:23 32 ************* 2 2020-05-24 11:24 32 ************* 3 2020-05-24 11:25 33 ************** 4 2020-05-24 11:26 34 *************** 5 2020-05-24 11:27 34 *************** 6 2020-05-24 11:28 35 **************** 7 2020-05-24 11:29 35 **************** 8 2020-05-24 11:30 35 **************** 9 2020-05-24 11:31 ? - 10 2020-05-24 11:32 24 ***** 11 2020-05-24 11:33 25 ****** 12 2020-05-24 11:34 26 ******* 13 2020-05-24 11:35 27 ******** 14 2020-05-24 11:36 28 ********* 15 2020-05-24 11:37 28 ********* 16 2020-05-24 11:38 29 ********** 17 2020-05-24 11:39 30 *********** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-STABLE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO mSATA 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT41B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun May 24 11:39:49 2020 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 12399 12 Power_Cycle_Count -O--CK 096 096 000 - 3179 177 Wear_Leveling_Count PO--C- 099 099 000 - 16 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 058 037 000 - 42 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 83 241 Total_LBAs_Written -O--CK 099 099 000 - 12884940108 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12323 - # 2 Short offline Completed without error 00% 12123 - # 3 Short offline Completed without error 00% 11854 - # 4 Short offline Completed without error 00% 11525 - # 5 Short offline Completed without error 00% 11501 - # 6 Short offline Completed without error 00% 11477 - # 7 Short offline Completed without error 00% 11240 - # 8 Short offline Completed without error 00% 10246 - # 9 Short offline Completed without error 00% 10229 - #10 Short offline Completed without error 00% 10207 - #11 Short offline Completed without error 00% 10132 - #12 Short offline Completed without error 00% 10071 - #13 Short offline Completed without error 00% 8621 - #14 Short offline Completed without error 00% 8335 - #15 Short offline Completed without error 00% 8292 - #16 Short offline Completed without error 00% 7472 - #17 Short offline Completed without error 00% 7179 - #18 Short offline Completed without error 00% 6736 - #19 Short offline Completed without error 00% 6570 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 40/40 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2020-05-23 14:20 ? - ... ..(125 skipped). .. - 127 2020-05-24 11:20 ? - 0 2020-05-24 11:30 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC