/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 15 08:51:20 2022 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12960) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 216) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 96 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 081 025 - 2476 4 Start_Stop_Count -O--CK 095 095 000 - 5910 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 16375 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 667 12 Power_Cycle_Count -O--CK 095 095 000 - 5193 191 G-Sense_Error_Rate -O---K 100 100 000 - 94 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 060 043 000 - 40 (Min/Max 8/57) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 71000 223 Load_Retry_Count -O--CK 100 100 000 - 667 225 Load_Cycle_Count -O--CK 085 085 000 - 160745 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 8 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8 [7] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.413 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.482 READ FPDMA QUEUED 60 00 00 00 20 00 00 01 1e 3f a8 40 00 00:00:00.482 READ FPDMA QUEUED 61 00 00 00 80 00 00 02 a7 b9 a8 40 00 00:00:00.482 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 02 57 0c 68 40 00 00:00:00.482 WRITE FPDMA QUEUED Error 7 [6] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 40 00 00 05 e3 a1 50 40 00 00:00:00.418 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.408 READ FPDMA QUEUED 60 00 00 00 30 00 00 00 70 a6 50 40 00 00:00:00.416 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.416 READ FPDMA QUEUED 60 00 00 00 40 00 00 0f 67 33 a8 40 00 00:00:00.416 READ FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.408 READ FPDMA QUEUED 60 00 00 00 38 00 00 05 4d 85 f8 40 00 00:00:00.413 READ FPDMA QUEUED 60 00 00 00 40 00 00 08 77 11 d0 40 00 00:00:00.413 READ FPDMA QUEUED 60 00 00 00 18 00 00 01 25 e2 30 40 00 00:00:00.413 READ FPDMA QUEUED 60 00 00 00 30 00 00 06 5c a4 78 40 00 00:00:00.413 READ FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.405 READ FPDMA QUEUED 60 00 00 00 58 00 00 00 5b 45 50 40 00 00:00:00.410 READ FPDMA QUEUED 60 00 00 00 40 00 00 05 60 5c b0 40 00 00:00:00.410 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 70 ab 98 40 00 00:00:00.410 READ FPDMA QUEUED 60 00 00 00 18 00 00 01 25 e2 d0 40 00 00:00:00.410 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.405 READ FPDMA QUEUED 61 00 00 00 18 00 00 00 bc 0b 40 40 00 00:00:00.408 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 00 8c 97 60 40 00 00:00:00.408 READ FPDMA QUEUED 60 00 00 00 08 00 00 01 25 e2 00 40 00 00:00:00.408 READ FPDMA QUEUED 60 00 00 00 08 00 00 04 9f 58 28 40 00 00:00:00.408 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 57 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 77 00 00 00 8c 97 40 40 00 00:00:00.404 READ FPDMA QUEUED 60 00 00 00 50 00 00 00 ba 5c b0 40 00 00:00:00.405 READ FPDMA QUEUED 60 00 00 00 30 00 00 00 a8 0e 90 40 00 00:00:00.405 READ FPDMA QUEUED 60 00 00 00 80 00 00 00 a8 0e 10 40 00 00:00:00.405 READ FPDMA QUEUED 60 00 00 00 18 00 00 07 60 06 b0 40 00 00:00:00.405 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 57 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 77 00 00 00 8c 97 40 40 00 00:00:00.336 READ FPDMA QUEUED 60 00 00 00 38 00 00 04 3c 93 28 40 00 00:00:00.402 READ FPDMA QUEUED 60 00 00 00 40 00 00 05 5e c4 30 40 00 00:00:00.402 READ FPDMA QUEUED 60 00 00 00 30 00 00 00 97 b7 20 40 00 00:00:00.402 READ FPDMA QUEUED 60 00 00 00 18 00 00 04 fd a6 f8 40 00 00:00:00.402 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 6675 hours (278 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 57 00 00 00 8c 97 60 40 00 Error: UNC at LBA = 0x008c9760 = 9213792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 71 d5 28 40 00 00:00:00.339 READ FPDMA QUEUED 60 00 00 00 77 00 00 00 8c 97 40 40 00 00:00:00.336 READ FPDMA QUEUED 60 00 00 00 08 00 00 03 84 6f 30 40 00 00:00:00.337 READ FPDMA QUEUED 60 00 00 00 40 00 00 0f 67 47 e0 40 00 00:00:00.337 READ FPDMA QUEUED 60 00 00 00 18 00 00 01 41 3d b8 40 00 00:00:00.337 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9611 - # 2 Vendor (0x50) Completed without error 00% 8275 - # 3 Short offline Completed without error 00% 8275 - # 4 Vendor (0x50) Completed without error 00% 8275 - # 5 Short offline Completed without error 00% 8274 - # 6 Extended offline Aborted by host 90% 8271 - # 7 Short offline Completed without error 00% 7600 - # 8 Vendor (0x50) Completed without error 00% 4962 - # 9 Short offline Completed without error 00% 4962 - #10 Vendor (0x50) Completed without error 00% 3451 - #11 Short offline Completed without error 00% 3451 - #12 Vendor (0x50) Completed without error 00% 3300 - #13 Short offline Completed without error 00% 3300 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 26/40 Celsius Lifetime Min/Max Temperature: 8/57 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (90) Index Estimated Time Temperature Celsius 91 2022-12-14 22:15 40 ********************* 92 2022-12-14 22:20 39 ******************** 93 2022-12-14 22:25 39 ******************** 94 2022-12-14 22:30 39 ******************** 95 2022-12-14 22:35 38 ******************* 96 2022-12-14 22:40 38 ******************* 97 2022-12-14 22:45 39 ******************** 98 2022-12-14 22:50 37 ****************** 99 2022-12-14 22:55 24 ***** 100 2022-12-14 23:00 28 ********* 101 2022-12-14 23:05 31 ************ 102 2022-12-14 23:10 31 ************ 103 2022-12-14 23:15 34 *************** 104 2022-12-14 23:20 35 **************** 105 2022-12-14 23:25 35 **************** 106 2022-12-14 23:30 35 **************** 107 2022-12-14 23:35 36 ***************** ... ..( 2 skipped). .. ***************** 110 2022-12-14 23:50 36 ***************** 111 2022-12-14 23:55 37 ****************** 112 2022-12-15 00:00 38 ******************* 113 2022-12-15 00:05 37 ****************** 114 2022-12-15 00:10 37 ****************** 115 2022-12-15 00:15 36 ***************** 116 2022-12-15 00:20 35 **************** 117 2022-12-15 00:25 35 **************** 118 2022-12-15 00:30 35 **************** 119 2022-12-15 00:35 36 ***************** 120 2022-12-15 00:40 36 ***************** 121 2022-12-15 00:45 35 **************** 122 2022-12-15 00:50 36 ***************** ... ..( 4 skipped). .. ***************** 127 2022-12-15 01:15 36 ***************** 0 2022-12-15 01:20 35 **************** 1 2022-12-15 01:25 35 **************** 2 2022-12-15 01:30 36 ***************** 3 2022-12-15 01:35 36 ***************** 4 2022-12-15 01:40 36 ***************** 5 2022-12-15 01:45 37 ****************** ... ..( 3 skipped). .. ****************** 9 2022-12-15 02:05 37 ****************** 10 2022-12-15 02:10 36 ***************** ... ..( 2 skipped). .. ***************** 13 2022-12-15 02:25 36 ***************** 14 2022-12-15 02:30 37 ****************** 15 2022-12-15 02:35 36 ***************** 16 2022-12-15 02:40 36 ***************** 17 2022-12-15 02:45 36 ***************** 18 2022-12-15 02:50 35 **************** 19 2022-12-15 02:55 35 **************** 20 2022-12-15 03:00 34 *************** 21 2022-12-15 03:05 34 *************** 22 2022-12-15 03:10 35 **************** 23 2022-12-15 03:15 35 **************** 24 2022-12-15 03:20 34 *************** 25 2022-12-15 03:25 34 *************** 26 2022-12-15 03:30 35 **************** 27 2022-12-15 03:35 34 *************** ... ..( 6 skipped). .. *************** 34 2022-12-15 04:10 34 *************** 35 2022-12-15 04:15 33 ************** 36 2022-12-15 04:20 33 ************** 37 2022-12-15 04:25 34 *************** 38 2022-12-15 04:30 34 *************** 39 2022-12-15 04:35 35 **************** ... ..( 2 skipped). .. **************** 42 2022-12-15 04:50 35 **************** 43 2022-12-15 04:55 36 ***************** ... ..( 2 skipped). .. ***************** 46 2022-12-15 05:10 36 ***************** 47 2022-12-15 05:15 37 ****************** 48 2022-12-15 05:20 36 ***************** 49 2022-12-15 05:25 36 ***************** 50 2022-12-15 05:30 35 **************** 51 2022-12-15 05:35 35 **************** 52 2022-12-15 05:40 34 *************** ... ..( 10 skipped). .. *************** 63 2022-12-15 06:35 34 *************** 64 2022-12-15 06:40 33 ************** ... ..( 12 skipped). .. ************** 77 2022-12-15 07:45 33 ************** 78 2022-12-15 07:50 26 ******* 79 2022-12-15 07:55 29 ********** 80 2022-12-15 08:00 30 *********** 81 2022-12-15 08:05 32 ************* 82 2022-12-15 08:10 36 ***************** 83 2022-12-15 08:15 37 ****************** 84 2022-12-15 08:20 38 ******************* 85 2022-12-15 08:25 39 ******************** 86 2022-12-15 08:30 39 ******************** 87 2022-12-15 08:35 38 ******************* 88 2022-12-15 08:40 39 ******************** 89 2022-12-15 08:45 34 *************** 90 2022-12-15 08:50 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific