/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG MZMPC256HBGJ-000H1 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: CXM12H1Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 2 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Feb 28 03:17:05 2022 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1020) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 17) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 002 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 093 093 000 - 34793 12 Power_Cycle_Count -O--CK 098 098 000 - 1668 170 Unknown_Attribute PO--C- 094 094 010 - 3082 171 Unknown_Attribute -O--CK 100 100 010 - 0 172 Unknown_Attribute -O--CK 100 100 010 - 0 173 Unknown_Attribute PO--C- 090 090 017 - 346 174 Unknown_Attribute -O--CK 099 099 000 - 829 183 Runtime_Bad_Block -O--CK 100 100 001 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 037 000 - 38 196 Reallocated_Event_Count -O---- 253 253 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 201 201 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 2 Comprehensive SMART error log 0x03 GPL,SL R/O 2 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1 - # 2 Short offline Completed without error 00% 1 - # 3 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 23/37 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 15 minutes Temperature Logging Interval: 15 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (85) Index Estimated Time Temperature Celsius 86 2022-02-26 19:30 ? - ... ..( 40 skipped). .. - 127 2022-02-27 05:45 ? - 0 2022-02-27 06:00 23 **** 1 2022-02-27 06:15 35 **************** 2 2022-02-27 06:30 34 *************** 3 2022-02-27 06:45 34 *************** 4 2022-02-27 07:00 35 **************** ... ..( 9 skipped). .. **************** 14 2022-02-27 09:30 35 **************** 15 2022-02-27 09:45 34 *************** 16 2022-02-27 10:00 35 **************** ... ..( 17 skipped). .. **************** 34 2022-02-27 14:30 35 **************** 35 2022-02-27 14:45 36 ***************** 36 2022-02-27 15:00 35 **************** ... ..( 7 skipped). .. **************** 44 2022-02-27 17:00 35 **************** 45 2022-02-27 17:15 36 ***************** 46 2022-02-27 17:30 36 ***************** 47 2022-02-27 17:45 36 ***************** 48 2022-02-27 18:00 35 **************** 49 2022-02-27 18:15 36 ***************** 50 2022-02-27 18:30 36 ***************** 51 2022-02-27 18:45 35 **************** 52 2022-02-27 19:00 36 ***************** 53 2022-02-27 19:15 36 ***************** 54 2022-02-27 19:30 36 ***************** 55 2022-02-27 19:45 35 **************** 56 2022-02-27 20:00 36 ***************** ... ..( 3 skipped). .. ***************** 60 2022-02-27 21:00 36 ***************** 61 2022-02-27 21:15 35 **************** 62 2022-02-27 21:30 36 ***************** 63 2022-02-27 21:45 36 ***************** 64 2022-02-27 22:00 36 ***************** 65 2022-02-27 22:15 35 **************** 66 2022-02-27 22:30 36 ***************** ... ..( 2 skipped). .. ***************** 69 2022-02-27 23:15 36 ***************** 70 2022-02-27 23:30 37 ****************** 71 2022-02-27 23:45 33 ************** 72 2022-02-28 00:00 33 ************** 73 2022-02-28 00:15 33 ************** 74 2022-02-28 00:30 34 *************** ... ..( 2 skipped). .. *************** 77 2022-02-28 01:15 34 *************** 78 2022-02-28 01:30 36 ***************** 79 2022-02-28 01:45 34 *************** 80 2022-02-28 02:00 33 ************** 81 2022-02-28 02:15 33 ************** 82 2022-02-28 02:30 36 ***************** 83 2022-02-28 02:45 36 ***************** 84 2022-02-28 03:00 35 **************** 85 2022-02-28 03:15 35 **************** SCT Error Recovery Control: Read: 57344 (5734.4 seconds) Write: 57344 (5734.4 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 49152 R_ERR response for data FIS 0x0003 2 53248 R_ERR response for device-to-host data FIS 0x0004 2 57344 R_ERR response for host-to-device data FIS 0x0005 2 7952 R_ERR response for non-data FIS 0x0006 2 2562 R_ERR response for device-to-host non-data FIS 0x0007 2 4096 R_ERR response for host-to-device non-data FIS 0x0008 2 7952 Device-to-host non-data FIS retries 0x0009 2 7953 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4778 Device-to-host register FISes sent due to a COMRESET 0x000b 2 6145 CRC errors within host-to-device FIS 0x000d 2 7953 Non-CRC errors within host-to-device FIS 0x000f 2 8176 R_ERR response for host-to-device data FIS, CRC 0x0010 2 15 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 49153 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 12112 R_ERR response for host-to-device non-data FIS, non-CRC