/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Lexar SSD NS100 128GB Serial Number: -- LU WWN Device Id: 5 3a5a27 ... Firmware Version: SN11035 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Wed Jun 14 16:15:47 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 20 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 9 Power_On_Hours -O--C- 100 100 000 - 71 12 Power_Cycle_Count -O--C- 100 100 000 - 28 164 Unknown_Attribute ------ 100 100 000 - 17180262405 165 Unknown_Attribute ------ 100 100 000 - 6 166 Unknown_Attribute ------ 100 100 000 - 4 167 Unknown_Attribute -O---K 100 100 000 - 5 194 Temperature_Celsius -O---K 048 048 000 - 48 (Min/Max 20/48) 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 806 242 Total_LBAs_Read -O--CK 100 100 000 - 595 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: ?/48 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (135) Index Estimated Time Temperature Celsius 136 2023-06-14 08:18 ? - ... ..(343 skipped). .. - 2 2023-06-14 14:02 ? - 3 2023-06-14 14:03 36 ***************** 4 2023-06-14 14:04 33 ************** 5 2023-06-14 14:05 36 ***************** 6 2023-06-14 14:06 ? - ... ..( 4 skipped). .. - 11 2023-06-14 14:11 ? - 12 2023-06-14 14:12 34 *************** 13 2023-06-14 14:13 ? - 14 2023-06-14 14:14 ? - 15 2023-06-14 14:15 33 ************** 16 2023-06-14 14:16 ? - 17 2023-06-14 14:17 36 ***************** 18 2023-06-14 14:18 ? - 19 2023-06-14 14:19 42 *********************** 20 2023-06-14 14:20 ? - 21 2023-06-14 14:21 35 **************** 22 2023-06-14 14:22 ? - 23 2023-06-14 14:23 29 ********** 24 2023-06-14 14:24 44 ************************* 25 2023-06-14 14:25 44 ************************* 26 2023-06-14 14:26 46 *************************** 27 2023-06-14 14:27 47 **************************** 28 2023-06-14 14:28 47 **************************** 29 2023-06-14 14:29 47 **************************** 30 2023-06-14 14:30 48 ***************************** ... ..( 8 skipped). .. ***************************** 39 2023-06-14 14:39 48 ***************************** 40 2023-06-14 14:40 ? - 41 2023-06-14 14:41 48 ***************************** ... ..( 48 skipped). .. ***************************** 90 2023-06-14 15:30 48 ***************************** 91 2023-06-14 15:31 ? - 92 2023-06-14 15:32 48 ***************************** 93 2023-06-14 15:33 ? - 94 2023-06-14 15:34 48 ***************************** ... ..( 3 skipped). .. ***************************** 98 2023-06-14 15:38 48 ***************************** 99 2023-06-14 15:39 ? - 100 2023-06-14 15:40 48 ***************************** 101 2023-06-14 15:41 ? - 102 2023-06-14 15:42 28 ********* 103 2023-06-14 15:43 32 ************* 104 2023-06-14 15:44 39 ******************** 105 2023-06-14 15:45 40 ********************* 106 2023-06-14 15:46 40 ********************* 107 2023-06-14 15:47 41 ********************** 108 2023-06-14 15:48 ? - 109 2023-06-14 15:49 ? - 110 2023-06-14 15:50 43 ************************ 111 2023-06-14 15:51 48 ***************************** 112 2023-06-14 15:52 ? - 113 2023-06-14 15:53 ? - 114 2023-06-14 15:54 48 ***************************** 115 2023-06-14 15:55 ? - ... ..( 2 skipped). .. - 118 2023-06-14 15:58 ? - 119 2023-06-14 15:59 48 ***************************** 120 2023-06-14 16:00 ? - ... ..( 2 skipped). .. - 123 2023-06-14 16:03 ? - 124 2023-06-14 16:04 48 ***************************** 125 2023-06-14 16:05 ? - 126 2023-06-14 16:06 ? - 127 2023-06-14 16:07 ? - 128 2023-06-14 16:08 42 *********************** 129 2023-06-14 16:09 44 ************************* 130 2023-06-14 16:10 44 ************************* 131 2023-06-14 16:11 48 ***************************** ... ..( 3 skipped). .. ***************************** 135 2023-06-14 16:15 48 ***************************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 28 --- Lifetime Power-On Resets 0x01 0x010 4 71 --- Power-on Hours 0x01 0x018 6 52867856 --- Logical Sectors Written 0x01 0x020 6 1189504 --- Number of Write Commands 0x01 0x028 6 39043624 --- Logical Sectors Read 0x01 0x030 6 970485 --- Number of Read Commands 0x01 0x038 6 64677342940 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 15 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC