/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p8 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA750 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 7 02:12:16 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7167) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 120) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 142 142 054 - 68 3 Spin_Up_Time POS--- 124 124 024 - 185 (Average 185) 4 Start_Stop_Count -O--C- 100 100 000 - 2609 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 113 113 020 - 35 9 Power_On_Hours -O--C- 095 095 000 - 36406 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2419 192 Power-Off_Retract_Count -O--CK 098 098 000 - 2939 193 Load_Cycle_Count -O--C- 098 098 000 - 2939 194 Temperature_Celsius -O---- 133 133 000 - 45 (Min/Max 9/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 13774 hours (573 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 20 00 00 0e 04 15 17 0e 00 Error: ICRC, ABRT at LBA = 0x0e041517 = 235148567 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 80 00 d8 b7 00 04 14 37 ee 00 3d+03:04:21.491 WRITE DMA ca 00 00 00 00 96 53 76 96 53 77 ef 00 3d+03:04:21.427 WRITE DMA ca 00 00 00 00 96 52 76 96 52 77 ef 00 3d+03:04:21.427 WRITE DMA ca 00 00 00 00 96 51 76 96 51 77 ef 00 3d+03:04:21.426 WRITE DMA ca 00 00 00 00 04 14 36 96 50 77 ef 00 3d+03:04:21.425 WRITE DMA Error 1 [0] occurred at disk power-on lifetime: 13751 hours (572 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 12 00 00 0f 7d b6 a5 0f 00 Error: ICRC, ABRT at LBA = 0x0f7db6a5 = 259896997 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 40 7d b3 36 7d b6 77 ef 00 2d+04:22:32.866 WRITE DMA ca 00 00 00 40 7d b7 b6 7d b2 f7 ef 00 2d+04:22:32.866 WRITE DMA ca 00 00 00 40 7d b3 36 7d b7 77 ef 00 2d+04:22:32.865 WRITE DMA ca 00 00 00 40 7d aa b6 7d b2 f7 ef 00 2d+04:22:32.865 WRITE DMA ca 00 00 00 40 7d bb 76 7d aa 77 ef 00 2d+04:22:32.865 WRITE DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 32903 - # 2 Extended offline Completed without error 00% 2875 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: 26/49 Celsius Lifetime Min/Max Temperature: 9/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (57) Index Estimated Time Temperature Celsius 58 2022-04-07 00:05 48 ***************************** 59 2022-04-07 00:06 48 ***************************** 60 2022-04-07 00:07 47 **************************** ... ..( 3 skipped). .. **************************** 64 2022-04-07 00:11 47 **************************** 65 2022-04-07 00:12 46 *************************** ... ..( 9 skipped). .. *************************** 75 2022-04-07 00:22 46 *************************** 76 2022-04-07 00:23 47 **************************** ... ..( 4 skipped). .. **************************** 81 2022-04-07 00:28 47 **************************** 82 2022-04-07 00:29 48 ***************************** ... ..( 12 skipped). .. ***************************** 95 2022-04-07 00:42 48 ***************************** 96 2022-04-07 00:43 49 ****************************** ... ..( 2 skipped). .. ****************************** 99 2022-04-07 00:46 49 ****************************** 100 2022-04-07 00:47 48 ***************************** ... ..( 2 skipped). .. ***************************** 103 2022-04-07 00:50 48 ***************************** 104 2022-04-07 00:51 47 **************************** ... ..( 6 skipped). .. **************************** 111 2022-04-07 00:58 47 **************************** 112 2022-04-07 00:59 46 *************************** 113 2022-04-07 01:00 46 *************************** 114 2022-04-07 01:01 47 **************************** ... ..( 5 skipped). .. **************************** 120 2022-04-07 01:07 47 **************************** 121 2022-04-07 01:08 48 ***************************** ... ..( 9 skipped). .. ***************************** 3 2022-04-07 01:18 48 ***************************** 4 2022-04-07 01:19 47 **************************** ... ..( 3 skipped). .. **************************** 8 2022-04-07 01:23 47 **************************** 9 2022-04-07 01:24 46 *************************** 10 2022-04-07 01:25 46 *************************** 11 2022-04-07 01:26 47 **************************** 12 2022-04-07 01:27 46 *************************** ... ..( 4 skipped). .. *************************** 17 2022-04-07 01:32 46 *************************** 18 2022-04-07 01:33 47 **************************** ... ..( 7 skipped). .. **************************** 26 2022-04-07 01:41 47 **************************** 27 2022-04-07 01:42 46 *************************** ... ..( 11 skipped). .. *************************** 39 2022-04-07 01:54 46 *************************** 40 2022-04-07 01:55 45 ************************** ... ..( 16 skipped). .. ************************** 57 2022-04-07 02:12 45 ************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2419 --- Lifetime Power-On Resets 0x01 0x010 4 36406 --- Power-on Hours 0x01 0x018 6 43097405507 --- Logical Sectors Written 0x01 0x020 6 583825357 --- Number of Write Commands 0x01 0x028 6 1371169767502 --- Logical Sectors Read 0x01 0x030 6 536122614 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 36296 --- Spindle Motor Power-on Hours 0x03 0x010 4 36296 --- Head Flying Hours 0x03 0x018 4 2939 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 33 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 45 --- Current Temperature 0x05 0x010 1 45 N-- Average Short Term Temperature 0x05 0x018 1 44 N-- Average Long Term Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 9 --- Lowest Temperature 0x05 0x030 1 48 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 45 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 19318 --- Number of Hardware Resets 0x06 0x010 4 16846 --- Number of ASR Events 0x06 0x018 4 2 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p8 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT01B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 7 02:12:18 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 090 090 010 - 107 9 Power_On_Hours -O--CK 098 098 000 - 5396 12 Power_Cycle_Count -O--CK 099 099 000 - 447 177 Wear_Leveling_Count PO--C- 099 099 000 - 6 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 090 090 010 - 107 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 090 090 010 - 107 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 1319 190 Airflow_Temperature_Cel -O--CK 068 050 000 - 32 195 ECC_Error_Rate -O-RC- 199 199 000 - 1319 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 43 241 Total_LBAs_Written -O--CK 099 099 000 - 9532285867 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1319 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1319 [2] occurred at disk power-on lifetime: 3308 hours (137 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 18 00 c8 00 00 4d 67 f2 10 00 19 3d+14:34:40.955 WRITE FPDMA QUEUED 61 00 10 00 c0 00 00 4b e8 1d a8 00 18 3d+14:34:40.955 WRITE FPDMA QUEUED 60 01 00 00 b8 00 00 41 c7 02 08 00 17 3d+14:34:40.955 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 13 3d+14:34:40.955 READ LOG EXT 61 00 30 00 98 00 00 5e e7 92 68 00 13 3d+14:34:40.955 WRITE FPDMA QUEUED Error 1318 [1] occurred at disk power-on lifetime: 3308 hours (137 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 30 00 98 00 00 5e e7 92 68 00 13 3d+14:34:40.801 WRITE FPDMA QUEUED 61 00 08 00 90 00 00 38 66 e9 50 00 12 3d+14:34:40.801 WRITE FPDMA QUEUED 60 01 00 00 88 00 00 41 c7 02 08 00 11 3d+14:34:40.801 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 0d 3d+14:34:40.801 READ LOG EXT 61 00 08 00 68 00 00 5d e6 0d 30 00 0d 3d+14:34:40.801 WRITE FPDMA QUEUED Error 1317 [0] occurred at disk power-on lifetime: 3308 hours (137 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 68 00 00 5d e6 0d 30 00 0d 3d+14:34:40.646 WRITE FPDMA QUEUED 61 00 10 00 60 00 00 5a e7 22 40 00 0c 3d+14:34:40.646 WRITE FPDMA QUEUED 60 01 00 00 58 00 00 41 c7 02 08 00 0b 3d+14:34:40.646 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 07 3d+14:34:40.646 READ LOG EXT 61 00 08 00 38 00 00 5a e7 22 38 00 07 3d+14:34:40.646 WRITE FPDMA QUEUED Error 1316 [3] occurred at disk power-on lifetime: 3308 hours (137 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 38 00 00 5a e7 22 38 00 07 3d+14:34:40.492 WRITE FPDMA QUEUED 61 00 08 00 30 00 00 38 66 e9 48 00 06 3d+14:34:40.492 WRITE FPDMA QUEUED 60 01 00 00 28 00 00 41 c7 02 08 00 05 3d+14:34:40.492 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 01 3d+14:34:40.492 READ LOG EXT 60 01 00 00 08 00 00 41 c7 02 08 00 01 3d+14:34:40.492 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 28/40 Celsius Lifetime Min/Max Temperature: 24/50 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (72) Index Estimated Time Temperature Celsius 73 2022-04-06 05:00 33 ************** ... ..( 11 skipped). .. ************** 85 2022-04-06 07:00 33 ************** 86 2022-04-06 07:10 32 ************* ... ..( 15 skipped). .. ************* 102 2022-04-06 09:50 32 ************* 103 2022-04-06 10:00 33 ************** 104 2022-04-06 10:10 32 ************* 105 2022-04-06 10:20 32 ************* 106 2022-04-06 10:30 32 ************* 107 2022-04-06 10:40 33 ************** ... ..( 18 skipped). .. ************** 126 2022-04-06 13:50 33 ************** 127 2022-04-06 14:00 32 ************* 0 2022-04-06 14:10 33 ************** ... ..( 15 skipped). .. ************** 16 2022-04-06 16:50 33 ************** 17 2022-04-06 17:00 34 *************** 18 2022-04-06 17:10 42 *********************** 19 2022-04-06 17:20 42 *********************** 20 2022-04-06 17:30 35 **************** 21 2022-04-06 17:40 38 ******************* 22 2022-04-06 17:50 34 *************** 23 2022-04-06 18:00 33 ************** ... ..( 9 skipped). .. ************** 33 2022-04-06 19:40 33 ************** 34 2022-04-06 19:50 34 *************** 35 2022-04-06 20:00 33 ************** ... ..( 2 skipped). .. ************** 38 2022-04-06 20:30 33 ************** 39 2022-04-06 20:40 ? - 40 2022-04-06 20:50 28 ********* 41 2022-04-06 21:00 ? - 42 2022-04-06 21:10 28 ********* 43 2022-04-06 21:20 29 ********** 44 2022-04-06 21:30 29 ********** 45 2022-04-06 21:40 30 *********** 46 2022-04-06 21:50 30 *********** 47 2022-04-06 22:00 31 ************ 48 2022-04-06 22:10 31 ************ 49 2022-04-06 22:20 31 ************ 50 2022-04-06 22:30 32 ************* ... ..( 7 skipped). .. ************* 58 2022-04-06 23:50 32 ************* 59 2022-04-07 00:00 33 ************** 60 2022-04-07 00:10 33 ************** 61 2022-04-07 00:20 32 ************* ... ..( 10 skipped). .. ************* 72 2022-04-07 02:10 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 447 --- Lifetime Power-On Resets 0x01 0x010 4 5396 --- Power-on Hours 0x01 0x018 6 9532285867 --- Logical Sectors Written 0x01 0x020 6 128345276 --- Number of Write Commands 0x01 0x028 6 3954766849 --- Logical Sectors Read 0x01 0x030 6 53458019 --- Number of Read Commands 0x01 0x038 6 1557000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 1319 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4782 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada2 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p8 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AQ10003 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Apr 7 02:12:18 2022 CEST ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20820) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 347) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1 2 Throughput_Performance -OS--K 055 055 000 - 19172 3 Spin_Up_Time PO---K 066 065 025 - 10365 4 Start_Stop_Count -O--CK 096 096 000 - 4461 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 54207 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3930 181 Program_Fail_Cnt_Total -O---K 099 099 000 - 32981274 191 G-Sense_Error_Rate -O---K 100 100 000 - 148 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 057 046 000 - 43 (Min/Max 8/54) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 2 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 22 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 4518 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 40074 hours (1669 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 40 00 00 17 1d b5 c0 40 00 Error: ICRC, ABRT 64 sectors at LBA = 0x171db5c0 = 387823040 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 17 1d b5 c0 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 50 48 7e 40 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 50 48 76 80 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 50 44 69 c0 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 18 1a da 80 40 00 00:00:08.416 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 17542 hours (730 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 60 00 00 49 a6 42 00 40 00 Error: ICRC, ABRT 96 sectors at LBA = 0x49a64200 = 1235632640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 49 a6 41 60 40 00 00:01:27.889 READ DMA EXT 25 00 00 00 20 00 00 3a f0 3f c0 40 00 00:01:27.889 READ DMA EXT 25 00 00 00 80 00 00 49 a6 40 e0 40 00 00:01:27.889 READ DMA EXT 25 00 00 01 00 00 00 49 a6 3f e0 40 00 00:01:27.889 READ DMA EXT 25 00 00 00 20 00 00 49 a6 3f c0 40 00 00:01:27.889 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 50725 - # 2 Short offline Aborted by host 30% 50725 - # 3 Extended offline Completed without error 00% 21194 - # 4 Short offline Completed without error 00% 20835 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 23/44 Celsius Lifetime Min/Max Temperature: 8/60 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (27) Index Estimated Time Temperature Celsius 28 2022-04-06 15:35 43 ************************ 29 2022-04-06 15:40 42 *********************** 30 2022-04-06 15:45 43 ************************ ... ..( 4 skipped). .. ************************ 35 2022-04-06 16:10 43 ************************ 36 2022-04-06 16:15 42 *********************** 37 2022-04-06 16:20 43 ************************ ... ..( 23 skipped). .. ************************ 61 2022-04-06 18:20 43 ************************ 62 2022-04-06 18:25 44 ************************* 63 2022-04-06 18:30 42 *********************** 64 2022-04-06 18:35 43 ************************ ... ..( 2 skipped). .. ************************ 67 2022-04-06 18:50 43 ************************ 68 2022-04-06 18:55 48 ***************************** 69 2022-04-06 19:00 49 ****************************** 70 2022-04-06 19:05 50 ******************************* ... ..( 3 skipped). .. ******************************* 74 2022-04-06 19:25 50 ******************************* 75 2022-04-06 19:30 49 ****************************** 76 2022-04-06 19:35 48 ***************************** ... ..( 4 skipped). .. ***************************** 81 2022-04-06 20:00 48 ***************************** 82 2022-04-06 20:05 49 ****************************** 83 2022-04-06 20:10 49 ****************************** 84 2022-04-06 20:15 49 ****************************** 85 2022-04-06 20:20 50 ******************************* 86 2022-04-06 20:25 49 ****************************** 87 2022-04-06 20:30 48 ***************************** 88 2022-04-06 20:35 47 **************************** 89 2022-04-06 20:40 47 **************************** 90 2022-04-06 20:45 46 *************************** 91 2022-04-06 20:50 46 *************************** 92 2022-04-06 20:55 46 *************************** 93 2022-04-06 21:00 45 ************************** 94 2022-04-06 21:05 25 ****** 95 2022-04-06 21:10 28 ********* 96 2022-04-06 21:15 28 ********* 97 2022-04-06 21:20 30 *********** 98 2022-04-06 21:25 31 ************ 99 2022-04-06 21:30 33 ************** 100 2022-04-06 21:35 34 *************** 101 2022-04-06 21:40 35 **************** 102 2022-04-06 21:45 36 ***************** 103 2022-04-06 21:50 36 ***************** 104 2022-04-06 21:55 38 ******************* 105 2022-04-06 22:00 38 ******************* 106 2022-04-06 22:05 39 ******************** 107 2022-04-06 22:10 40 ********************* 108 2022-04-06 22:15 40 ********************* 109 2022-04-06 22:20 42 *********************** 110 2022-04-06 22:25 41 ********************** 111 2022-04-06 22:30 41 ********************** 112 2022-04-06 22:35 42 *********************** 113 2022-04-06 22:40 41 ********************** 114 2022-04-06 22:45 42 *********************** 115 2022-04-06 22:50 42 *********************** 116 2022-04-06 22:55 43 ************************ ... ..( 5 skipped). .. ************************ 122 2022-04-06 23:25 43 ************************ 123 2022-04-06 23:30 44 ************************* 124 2022-04-06 23:35 43 ************************ ... ..( 12 skipped). .. ************************ 9 2022-04-07 00:40 43 ************************ 10 2022-04-07 00:45 44 ************************* ... ..( 6 skipped). .. ************************* 17 2022-04-07 01:20 44 ************************* 18 2022-04-07 01:25 43 ************************ 19 2022-04-07 01:30 44 ************************* ... ..( 2 skipped). .. ************************* 22 2022-04-07 01:45 44 ************************* 23 2022-04-07 01:50 43 ************************ 24 2022-04-07 01:55 44 ************************* 25 2022-04-07 02:00 43 ************************ 26 2022-04-07 02:05 43 ************************ 27 2022-04-07 02:10 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 8 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/ada3 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p8 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG Device Model: SAMSUNG HD502HI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AG01113 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Thu Apr 7 02:12:19 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6582) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 12) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 093 093 011 - 3110 4 Start_Stop_Count -O--CK 093 093 000 - 6843 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 11392 9 Power_On_Hours -O--CK 088 088 000 - 62433 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6009 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 065 055 000 - 35 (Min/Max 19/35) 194 Temperature_Celsius -O---K 065 053 000 - 35 (Min/Max 19/36) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 30730 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 2 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 53076 hours (2211 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 04 00 00 00 00 db 4b c0 40 00 04:58:01.620 WRITE FPDMA QUEUED 61 00 00 00 e8 00 00 00 75 a0 98 40 00 04:58:01.620 WRITE FPDMA QUEUED 61 00 00 00 e8 00 00 00 75 91 98 40 00 04:58:01.610 WRITE FPDMA QUEUED 61 00 00 00 e0 00 00 00 6d 88 a0 40 00 04:58:01.610 WRITE FPDMA QUEUED 61 00 00 00 f0 00 00 00 6a 50 08 40 00 04:58:01.600 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 59143 - # 2 Extended offline Completed without error 00% 29603 - # 3 Extended offline Aborted by host 80% 1400 - # 4 Extended offline Aborted by host 90% 1400 - # 5 Extended offline Aborted by host 90% 1400 - # 6 Extended offline Aborted by host 90% 1400 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: --/36 Celsius Lifetime Min/Max Temperature: --/48 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (26) Index Estimated Time Temperature Celsius 27 2022-04-07 00:05 35 **************** ... ..( 37 skipped). .. **************** 65 2022-04-07 00:43 35 **************** 66 2022-04-07 00:44 36 ***************** ... ..( 3 skipped). .. ***************** 70 2022-04-07 00:48 36 ***************** 71 2022-04-07 00:49 35 **************** 72 2022-04-07 00:50 36 ***************** ... ..( 3 skipped). .. ***************** 76 2022-04-07 00:54 36 ***************** 77 2022-04-07 00:55 35 **************** ... ..( 11 skipped). .. **************** 89 2022-04-07 01:07 35 **************** 90 2022-04-07 01:08 36 ***************** 91 2022-04-07 01:09 36 ***************** 92 2022-04-07 01:10 36 ***************** 93 2022-04-07 01:11 35 **************** 94 2022-04-07 01:12 36 ***************** ... ..( 3 skipped). .. ***************** 98 2022-04-07 01:16 36 ***************** 99 2022-04-07 01:17 35 **************** ... ..( 54 skipped). .. **************** 26 2022-04-07 02:12 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/nvd0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p8 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: PNY CS3030 500GB SSD Serial Number: -- Firmware Version: CS303226 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Thu Apr 7 02:12:19 2022 CEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.55W - - 0 0 0 0 0 0 1 + 4.49W - - 1 1 1 1 0 0 2 + 3.97W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 29 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 13,566,270 [6.94 TB] Data Units Written: 10,130,297 [5.18 TB] Host Read Commands: 170,801,674 Host Write Commands: 100,635,054 Controller Busy Time: 648 Power Cycles: 477 Power On Hours: 5,369 Unsafe Shutdowns: 39 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,927 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) No Errors Logged