/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE i386] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 Device Model: Maxtor 6Y080P0 Serial Number: -- Firmware Version: YAR41BW0 User Capacity: 81,964,302,336 bytes [81.9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Wed Oct 21 08:40:03 2020 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 192 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 225 225 063 - 11169 4 Start_Stop_Count -O--CK 253 253 000 - 696 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 250 000 - 0 8 Seek_Time_Performance POS--K 249 239 187 - 57843 9 Power_On_Minutes -O--CK 218 218 000 - 408h+43m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 249 249 000 - 1673 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 253 253 000 - 30 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 4946 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 252 252 000 - 1 199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 246 000 - 1 202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 0 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 196 196 000 - 0 99 Unknown_Attribute --S--- 253 253 000 - 0 100 Unknown_Attribute --S--- 253 253 000 - 0 101 Unknown_Attribute --S--- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: Input/output error General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 60% 10873 6166274 # 2 Short offline Completed: read failure 60% 10648 6166274 # 3 Short offline Completed: read failure 60% 10625 6166274 # 4 Short offline Completed: read failure 60% 10610 6166274 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/ada1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.3-RELEASE i386] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 Device Model: Maxtor 6Y080P0 Serial Number: -- Firmware Version: YAR41BW0 User Capacity: 81,963,220,480 bytes [81.9 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Wed Oct 21 08:40:04 2020 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 192 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 200 200 063 - 15855 4 Start_Stop_Count -O--CK 252 252 000 - 2173 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 1 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 242 000 - 0 8 Seek_Time_Performance POS--K 253 240 187 - 39652 9 Power_On_Minutes -O--CK 225 225 000 - 71h+33m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 246 246 000 - 2928 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 253 253 000 - 19 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 1739 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 253 253 000 - 0 199 UDMA_CRC_Error_Count ---R-- 185 144 000 - 54 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 243 000 - 11 202 Data_Address_Mark_Errs -O-R-- 253 249 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 3 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 197 197 000 - 0 99 Unknown_Attribute --S--- 253 253 000 - 0 100 Unknown_Attribute --S--- 253 253 000 - 0 101 Unknown_Attribute --S--- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: Input/output error General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 145 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 145 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 da e0 ba e0 Error: ICRC, ABRT at LBA = 0x00bae0da = 12247258 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 da e0 ba e0 00 02:36:43.168 READ DMA c8 00 80 c2 a6 bd e0 00 02:36:43.168 READ DMA c8 00 30 e2 52 bd e0 00 02:36:43.168 READ DMA c8 00 80 f2 6e bd e0 00 02:36:43.152 READ DMA c8 00 58 e2 5e bd e0 00 02:36:43.152 READ DMA Error 144 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 48 e2 07 bf e0 00 02:36:41.296 READ DMA c8 00 48 e2 07 bf e0 00 02:36:41.216 READ DMA ca 00 40 a2 67 01 e0 00 02:36:41.200 WRITE DMA ca 00 38 6a 5f 01 e0 00 02:36:41.200 WRITE DMA ca 00 38 ea 5e 00 e0 00 02:36:41.200 WRITE DMA Error 143 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 48 e2 07 bf e0 00 02:36:41.216 READ DMA ca 00 40 a2 67 01 e0 00 02:36:41.200 WRITE DMA ca 00 38 6a 5f 01 e0 00 02:36:41.200 WRITE DMA ca 00 38 ea 5e 00 e0 00 02:36:41.200 WRITE DMA ca 00 08 ea 5e 00 e0 00 02:36:41.200 WRITE DMA Error 142 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 48 e2 07 bf e0 00 02:36:41.136 READ DMA c8 00 48 e2 07 bf e0 00 02:36:41.072 READ DMA c8 00 48 e2 07 bf e0 00 02:36:41.024 READ DMA c8 00 48 e2 07 bf e0 00 02:36:40.960 READ DMA c8 00 48 e2 07 bf e0 00 02:36:40.912 READ DMA Error 141 occurred at disk power-on lifetime: 8532 hours (355 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 e2 07 bf e0 Error: ICRC, ABRT at LBA = 0x00bf07e2 = 12519394 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 48 e2 07 bf e0 00 02:36:41.072 READ DMA c8 00 48 e2 07 bf e0 00 02:36:41.024 READ DMA c8 00 48 e2 07 bf e0 00 02:36:40.960 READ DMA c8 00 48 e2 07 bf e0 00 02:36:40.912 READ DMA c8 00 08 4a 08 bf e0 00 02:36:40.912 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported