/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Dec 2 15:49:54 2022 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 12274 12 Power_Cycle_Count -O--CK 098 098 000 - 1342 177 Wear_Leveling_Count PO--C- 099 099 000 - 6 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 077 046 000 - 23 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 110 241 Total_LBAs_Written -O--CK 099 099 000 - 6844272082 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 40/40 Celsius Lifetime Min/Max Temperature: 15/51 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (14) Index Estimated Time Temperature Celsius 15 2022-12-01 18:30 28 ********* ... ..( 28 skipped). .. ********* 44 2022-12-01 23:20 28 ********* 45 2022-12-01 23:30 26 ******* 46 2022-12-01 23:40 25 ****** 47 2022-12-01 23:50 25 ****** 48 2022-12-02 00:00 24 ***** 49 2022-12-02 00:10 24 ***** 50 2022-12-02 00:20 24 ***** 51 2022-12-02 00:30 23 **** ... ..( 17 skipped). .. **** 69 2022-12-02 03:30 23 **** 70 2022-12-02 03:40 ? - 71 2022-12-02 03:50 21 ** 72 2022-12-02 04:00 23 **** 73 2022-12-02 04:10 23 **** 74 2022-12-02 04:20 23 **** 75 2022-12-02 04:30 22 *** ... ..( 2 skipped). .. *** 78 2022-12-02 05:00 22 *** 79 2022-12-02 05:10 23 **** 80 2022-12-02 05:20 24 ***** 81 2022-12-02 05:30 25 ****** 82 2022-12-02 05:40 25 ****** 83 2022-12-02 05:50 25 ****** 84 2022-12-02 06:00 24 ***** 85 2022-12-02 06:10 23 **** 86 2022-12-02 06:20 24 ***** 87 2022-12-02 06:30 24 ***** 88 2022-12-02 06:40 25 ****** 89 2022-12-02 06:50 25 ****** 90 2022-12-02 07:00 26 ******* ... ..( 2 skipped). .. ******* 93 2022-12-02 07:30 26 ******* 94 2022-12-02 07:40 24 ***** 95 2022-12-02 07:50 23 **** 96 2022-12-02 08:00 21 ** 97 2022-12-02 08:10 21 ** 98 2022-12-02 08:20 20 * 99 2022-12-02 08:30 20 * 100 2022-12-02 08:40 21 ** ... ..( 5 skipped). .. ** 106 2022-12-02 09:40 21 ** 107 2022-12-02 09:50 22 *** 108 2022-12-02 10:00 23 **** 109 2022-12-02 10:10 24 ***** 110 2022-12-02 10:20 25 ****** 111 2022-12-02 10:30 26 ******* ... ..( 7 skipped). .. ******* 119 2022-12-02 11:50 26 ******* 120 2022-12-02 12:00 25 ****** 121 2022-12-02 12:10 25 ****** 122 2022-12-02 12:20 25 ****** 123 2022-12-02 12:30 26 ******* ... ..( 5 skipped). .. ******* 1 2022-12-02 13:30 26 ******* 2 2022-12-02 13:40 25 ****** 3 2022-12-02 13:50 24 ***** 4 2022-12-02 14:00 23 **** 5 2022-12-02 14:10 23 **** 6 2022-12-02 14:20 24 ***** 7 2022-12-02 14:30 25 ****** 8 2022-12-02 14:40 26 ******* 9 2022-12-02 14:50 27 ******** ... ..( 2 skipped). .. ******** 12 2022-12-02 15:20 27 ******** 13 2022-12-02 15:30 28 ********* 14 2022-12-02 15:40 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1342 --- Lifetime Power-On Resets 0x01 0x010 4 12274 --- Power-on Hours 0x01 0x018 6 6844272082 --- Logical Sectors Written 0x01 0x020 6 58446584 --- Number of Write Commands 0x01 0x028 6 8498538440 --- Logical Sectors Read 0x01 0x030 6 101108714 --- Number of Read Commands 0x01 0x038 6 989000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 23 --- Current Temperature 0x05 0x020 1 51 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 15606 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC