/dev/ada0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black Device Model: WDC WD1600BEKT-08PVMT1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Nov 13 00:17:32 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 39) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1875 3 Spin_Up_Time POS--K 164 137 021 - 791 4 Start_Stop_Count -O--CK 098 098 000 - 2718 5 Reallocated_Sector_Ct PO--CK 167 167 140 - 277 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3394 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2707 192 Power-Off_Retract_Count -O--CK 200 200 000 - 208 193 Load_Cycle_Count -O--CK 190 190 000 - 31784 194 Temperature_Celsius -O---K 122 092 000 - 21 196 Reallocated_Event_Count -O--CK 154 148 000 - 46 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 096 096 000 - 3288 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 988 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 988 [3] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 78 40 00 00:03:33.984 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 78 40 00 00:03:30.454 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 78 40 00 00:03:28.745 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 58 40 00 00:03:28.708 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:24.850 READ DMA EXT Error 987 [2] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 78 40 00 00:03:28.745 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 58 40 00 00:03:28.708 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:24.850 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:23.120 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:19.590 READ DMA EXT Error 986 [1] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:23.120 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:19.590 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:17.860 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:14.328 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:12.621 READ DMA EXT Error 985 [0] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:17.860 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:14.328 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:12.621 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 66 40 00 00:03:12.620 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 46 40 00 00:03:12.572 READ DMA EXT Error 984 [23] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:12.621 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 66 40 00 00:03:12.620 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 46 40 00 00:03:12.572 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:09.033 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:07.296 READ DMA EXT Error 983 [22] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:07.296 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:03.764 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:02.028 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:02:58.496 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:02:56.922 READ DMA EXT Error 982 [21] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 86 40 00 00:03:02.028 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:02:58.496 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 86 40 00 00:02:56.922 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 66 40 00 00:02:56.922 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 46 40 00 00:02:56.918 READ DMA EXT Error 981 [20] occurred at disk power-on lifetime: 3393 hours (141 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 01 07 59 8b 40 00 Error: UNC 32 sectors at LBA = 0x0107598b = 17258891 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 01 07 59 86 40 00 00:02:56.922 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 66 40 00 00:02:56.922 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 46 40 00 00:02:56.918 READ DMA EXT 25 00 00 00 12 00 00 01 07 59 34 40 00 00:02:56.917 READ DMA EXT 25 00 00 00 20 00 00 01 07 59 14 40 00 00:02:56.916 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 20/22 Celsius Lifetime Min/Max Temperature: 18/51 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (64) Index Estimated Time Temperature Celsius 65 2021-11-12 22:10 24 ***** 66 2021-11-12 22:11 ? - 67 2021-11-12 22:12 24 ***** 68 2021-11-12 22:13 26 ******* 69 2021-11-12 22:14 27 ******** 70 2021-11-12 22:15 27 ******** 71 2021-11-12 22:16 ? - 72 2021-11-12 22:17 24 ***** 73 2021-11-12 22:18 ? - 74 2021-11-12 22:19 24 ***** 75 2021-11-12 22:20 ? - 76 2021-11-12 22:21 17 - 77 2021-11-12 22:22 18 - 78 2021-11-12 22:23 19 - 79 2021-11-12 22:24 19 - 80 2021-11-12 22:25 20 * 81 2021-11-12 22:26 19 - 82 2021-11-12 22:27 20 * 83 2021-11-12 22:28 19 - 84 2021-11-12 22:29 20 * 85 2021-11-12 22:30 ? - 86 2021-11-12 22:31 20 * 87 2021-11-12 22:32 21 ** 88 2021-11-12 22:33 21 ** 89 2021-11-12 22:34 21 ** 90 2021-11-12 22:35 ? - 91 2021-11-12 22:36 22 *** 92 2021-11-12 22:37 22 *** 93 2021-11-12 22:38 ? - 94 2021-11-12 22:39 19 - 95 2021-11-12 22:40 19 - 96 2021-11-12 22:41 ? - 97 2021-11-12 22:42 23 **** 98 2021-11-12 22:43 22 *** 99 2021-11-12 22:44 22 *** 100 2021-11-12 22:45 22 *** 101 2021-11-12 22:46 21 ** ... ..( 15 skipped). .. ** 117 2021-11-12 23:02 21 ** 118 2021-11-12 23:03 20 * ... ..( 5 skipped). .. * 124 2021-11-12 23:09 20 * 125 2021-11-12 23:10 21 ** ... ..( 3 skipped). .. ** 1 2021-11-12 23:14 21 ** 2 2021-11-12 23:15 ? - 3 2021-11-12 23:16 21 ** 4 2021-11-12 23:17 21 ** 5 2021-11-12 23:18 21 ** 6 2021-11-12 23:19 22 *** 7 2021-11-12 23:20 21 ** ... ..( 7 skipped). .. ** 15 2021-11-12 23:28 21 ** 16 2021-11-12 23:29 20 * 17 2021-11-12 23:30 21 ** 18 2021-11-12 23:31 20 * 19 2021-11-12 23:32 20 * 20 2021-11-12 23:33 20 * 21 2021-11-12 23:34 21 ** 22 2021-11-12 23:35 20 * 23 2021-11-12 23:36 21 ** 24 2021-11-12 23:37 21 ** 25 2021-11-12 23:38 20 * 26 2021-11-12 23:39 21 ** 27 2021-11-12 23:40 20 * 28 2021-11-12 23:41 20 * 29 2021-11-12 23:42 21 ** 30 2021-11-12 23:43 20 * 31 2021-11-12 23:44 21 ** 32 2021-11-12 23:45 21 ** 33 2021-11-12 23:46 20 * 34 2021-11-12 23:47 21 ** ... ..( 7 skipped). .. ** 42 2021-11-12 23:55 21 ** 43 2021-11-12 23:56 22 *** 44 2021-11-12 23:57 21 ** ... ..( 19 skipped). .. ** 64 2021-11-13 00:17 21 ** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 347 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 4194 Vendor specific /dev/ada1 smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.1-RELEASE-p21-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black Device Model: WDC WD1600BEKT-08PVMT1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Nov 13 00:17:33 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 32) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 38 3 Spin_Up_Time POS--K 164 141 021 - 800 4 Start_Stop_Count -O--CK 100 100 000 - 905 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 092 092 000 - 6410 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 866 192 Power-Off_Retract_Count -O--CK 200 200 000 - 66 193 Load_Cycle_Count -O--CK 182 182 000 - 55410 194 Temperature_Celsius -O---K 122 098 000 - 21 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 5 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 092 092 000 - 6126 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 94 ab 40 00 Error: UNC at LBA = 0x12a194ab = 312579243 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 f0 00 00 12 a1 94 00 40 08 00:29:17.040 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:17.040 READ LOG EXT 60 01 00 00 e0 00 00 12 a1 94 00 40 08 00:29:13.141 READ FPDMA QUEUED 60 01 00 00 d8 00 00 01 06 4b 00 40 08 00:29:13.140 READ FPDMA QUEUED 60 01 00 00 d0 00 00 01 06 4a 00 40 08 00:29:13.138 READ FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 94 ba 40 00 Error: UNC at LBA = 0x12a194ba = 312579258 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e0 00 00 12 a1 94 00 40 08 00:29:13.141 READ FPDMA QUEUED 60 01 00 00 d8 00 00 01 06 4b 00 40 08 00:29:13.140 READ FPDMA QUEUED 60 01 00 00 d0 00 00 01 06 4a 00 40 08 00:29:13.138 READ FPDMA QUEUED 60 01 00 00 c8 00 00 01 06 49 00 40 08 00:29:13.137 READ FPDMA QUEUED 60 01 00 00 c0 00 00 01 06 48 00 40 08 00:29:13.136 READ FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 9d 5f 40 00 Error: UNC at LBA = 0x12a19d5f = 312581471 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 40 00 00 12 a1 9d 00 40 08 00:29:08.249 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:08.249 READ LOG EXT 60 01 00 00 30 00 00 12 a1 9d 00 40 08 00:29:06.118 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:06.118 READ LOG EXT 60 01 00 00 20 00 00 12 a1 9d 00 40 08 00:29:01.706 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 9d 0d 40 00 Error: UNC at LBA = 0x12a19d0d = 312581389 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 30 00 00 12 a1 9d 00 40 08 00:29:06.118 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:06.118 READ LOG EXT 60 01 00 00 20 00 00 12 a1 9d 00 40 08 00:29:01.706 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:01.705 READ LOG EXT 60 01 00 00 10 00 00 12 a1 9d 00 40 08 00:28:59.034 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 9d 5f 40 00 Error: UNC at LBA = 0x12a19d5f = 312581471 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 00 12 a1 9d 00 40 08 00:29:01.706 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:29:01.705 READ LOG EXT 60 01 00 00 10 00 00 12 a1 9d 00 40 08 00:28:59.034 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:28:59.033 READ LOG EXT 60 01 00 00 00 00 00 12 a1 9d 00 40 08 00:28:57.041 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 9d 5f 40 00 Error: UNC at LBA = 0x12a19d5f = 312581471 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 10 00 00 12 a1 9d 00 40 08 00:28:59.034 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 08 00:28:59.033 READ LOG EXT 60 01 00 00 00 00 00 12 a1 9d 00 40 08 00:28:57.041 READ FPDMA QUEUED 60 01 00 00 f8 00 00 12 a1 9c 00 40 08 00:28:56.023 READ FPDMA QUEUED 60 01 00 00 f0 00 00 12 a1 9b 00 40 08 00:28:55.955 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 6408 hours (267 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 a1 9d 0d 40 00 Error: UNC at LBA = 0x12a19d0d = 312581389 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 12 a1 9d 00 40 08 00:28:57.041 READ FPDMA QUEUED 60 01 00 00 f8 00 00 12 a1 9c 00 40 08 00:28:56.023 READ FPDMA QUEUED 60 01 00 00 f0 00 00 12 a1 9b 00 40 08 00:28:55.955 READ FPDMA QUEUED 60 01 00 00 e8 00 00 12 a1 9a 00 40 08 00:28:55.812 READ FPDMA QUEUED 60 01 00 00 e0 00 00 00 00 03 00 40 08 00:28:55.811 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 20/22 Celsius Lifetime Min/Max Temperature: 18/45 Celsius Specified Max Operating Temperature: 24 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (9) Index Estimated Time Temperature Celsius 10 2021-11-12 22:10 29 ********** 11 2021-11-12 22:11 28 ********* 12 2021-11-12 22:12 29 ********** 13 2021-11-12 22:13 28 ********* 14 2021-11-12 22:14 29 ********** 15 2021-11-12 22:15 30 *********** 16 2021-11-12 22:16 31 ************ 17 2021-11-12 22:17 30 *********** ... ..( 2 skipped). .. *********** 20 2021-11-12 22:20 30 *********** 21 2021-11-12 22:21 29 ********** 22 2021-11-12 22:22 30 *********** 23 2021-11-12 22:23 29 ********** ... ..( 3 skipped). .. ********** 27 2021-11-12 22:27 29 ********** 28 2021-11-12 22:28 30 *********** 29 2021-11-12 22:29 29 ********** 30 2021-11-12 22:30 30 *********** 31 2021-11-12 22:31 29 ********** ... ..( 2 skipped). .. ********** 34 2021-11-12 22:34 29 ********** 35 2021-11-12 22:35 ? - 36 2021-11-12 22:36 26 ******* 37 2021-11-12 22:37 25 ****** 38 2021-11-12 22:38 24 ***** 39 2021-11-12 22:39 22 *** 40 2021-11-12 22:40 22 *** 41 2021-11-12 22:41 21 ** ... ..( 9 skipped). .. ** 51 2021-11-12 22:51 21 ** 52 2021-11-12 22:52 20 * 53 2021-11-12 22:53 20 * 54 2021-11-12 22:54 21 ** 55 2021-11-12 22:55 21 ** 56 2021-11-12 22:56 20 * 57 2021-11-12 22:57 21 ** 58 2021-11-12 22:58 21 ** 59 2021-11-12 22:59 20 * ... ..( 5 skipped). .. * 65 2021-11-12 23:05 20 * 66 2021-11-12 23:06 22 *** 67 2021-11-12 23:07 21 ** 68 2021-11-12 23:08 21 ** 69 2021-11-12 23:09 21 ** 70 2021-11-12 23:10 ? - 71 2021-11-12 23:11 20 * ... ..( 8 skipped). .. * 80 2021-11-12 23:20 20 * 81 2021-11-12 23:21 21 ** ... ..( 33 skipped). .. ** 115 2021-11-12 23:55 21 ** 116 2021-11-12 23:56 22 *** 117 2021-11-12 23:57 21 ** ... ..( 4 skipped). .. ** 122 2021-11-13 00:02 21 ** 123 2021-11-13 00:03 22 *** 124 2021-11-13 00:04 21 ** ... ..( 5 skipped). .. ** 2 2021-11-13 00:10 21 ** 3 2021-11-13 00:11 22 *** 4 2021-11-13 00:12 22 *** 5 2021-11-13 00:13 21 ** ... ..( 3 skipped). .. ** 9 2021-11-13 00:17 21 ** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 4195 Vendor specific