Probe #cf15aea783 of Dell 0KP561 Desktop Computer (OptiPlex 330)

Log: smartctl

/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SV300S37A60G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 580ABBF0 User Capacity: 60,022,480,896 bytes [60.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 21 18:55:14 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Unavailable Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 095 095 050 - 1/84296206 5 Retired_Block_Count PO--CK 097 097 003 - 0 9 Power_On_Hours_and_Msec -O--CK 058 058 000 - 37589h+29m+36.850s 12 Power_Cycle_Count -O--CK 098 098 000 - 2914 171 Program_Fail_Count -O-R-- 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 1487 177 Wear_Range_Delta ------ 000 000 000 - 90 181 Program_Fail_Count -O-R-- 100 100 000 - 0 182 Erase_Fail_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--C- 100 100 000 - 0 189 Airflow_Temperature_Cel ------ 037 054 000 - 37 (Min/Max 12/54) 194 Temperature_Celsius -O---K 037 054 000 - 37 (Min/Max 12/54) 195 ECC_Uncorr_Error_Count --SRC- 114 114 000 - 1/84296206 196 Reallocated_Event_Count PO--CK 097 097 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 114 114 000 - 1/84296206 204 Soft_ECC_Correct_Rate --SRC- 114 114 000 - 1/84296206 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 077 077 010 - 0 233 SandForce_Internal -O--CK 000 000 000 - 17355 234 SandForce_Internal -O--CK 000 000 000 - 15325 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 15325 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 12597 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 16 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 12/54 Celsius Lifetime Min/Max Temperature: 12/59 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/85 Celsius Temperature History Size (Index): 478 (252) Index Estimated Time Temperature Celsius 253 2023-09-18 11:20 37 ****************** ... ..( 49 skipped). .. ****************** 303 2023-09-18 19:40 37 ****************** 304 2023-09-18 19:50 36 ***************** 305 2023-09-18 20:00 36 ***************** 306 2023-09-18 20:10 36 ***************** 307 2023-09-18 20:20 37 ****************** ... ..( 5 skipped). .. ****************** 313 2023-09-18 21:20 37 ****************** 314 2023-09-18 21:30 36 ***************** ... ..( 3 skipped). .. ***************** 318 2023-09-18 22:10 36 ***************** 319 2023-09-18 22:20 37 ****************** ... ..(393 skipped). .. ****************** 235 2023-09-21 16:00 37 ****************** 236 2023-09-21 16:10 36 ***************** 237 2023-09-21 16:20 37 ****************** ... ..( 14 skipped). .. ****************** 252 2023-09-21 18:50 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2914 --- Lifetime Power-On Resets 0x01 0x010 4 37589 --- Power-on Hours 0x01 0x018 6 32139248748 --- Logical Sectors Written 0x01 0x028 6 26418650222 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 2871 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 288 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 37 --- Average Short Term Temperature 0x05 0x018 1 38 --- Average Long Term Temperature 0x05 0x020 1 57 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 50 --- Highest Average Short Term Temperature 0x05 0x038 1 22 --- Lowest Average Short Term Temperature 0x05 0x040 1 38 --- Highest Average Long Term Temperature 0x05 0x048 1 27 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 81 --- Number of Hardware Resets 0x06 0x010 4 25933 --- Number of ASR Events 0x06 0x018 4 312 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 26 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 138 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 120 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub