/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p11 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 883 DCT 1.92TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: HXT7404Q User Capacity: 1,920,383,410,176 bytes [1.92 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jul 8 20:32:06 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 094 094 000 - 29210 12 Power_Cycle_Count -O--CK 099 099 000 - 6 177 Wear_Leveling_Count PO--C- 092 092 005 - 539 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 5837 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 071 058 000 - 29 194 Temperature_Celsius -O---K 071 058 000 - 29 (Min/Max 21/42) 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 202 Exception_Mode_Status PO--CK 100 100 010 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 3 241 Total_LBAs_Written -O--CK 099 099 000 - 684268269912 242 Total_LBAs_Read -O--CK 099 099 000 - 2417525603595 243 SATA_Downshift_Ct -O--CK 100 100 000 - 0 244 Thermal_Throttle_St -O--CK 100 100 000 - 0 245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535 246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535 247 Timed_Workld_Timer -O--CK 100 100 000 - 65535 251 NAND_Writes -O--CK 100 100 000 - 2337061004224 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 23/29 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (36) Index Estimated Time Temperature Celsius 37 2024-07-07 23:20 28 ********* ... ..( 5 skipped). .. ********* 43 2024-07-08 00:20 28 ********* 44 2024-07-08 00:30 27 ******** 45 2024-07-08 00:40 28 ********* 46 2024-07-08 00:50 27 ******** 47 2024-07-08 01:00 28 ********* 48 2024-07-08 01:10 28 ********* 49 2024-07-08 01:20 27 ******** 50 2024-07-08 01:30 28 ********* 51 2024-07-08 01:40 27 ******** 52 2024-07-08 01:50 28 ********* 53 2024-07-08 02:00 28 ********* 54 2024-07-08 02:10 27 ******** 55 2024-07-08 02:20 28 ********* ... ..( 4 skipped). .. ********* 60 2024-07-08 03:10 28 ********* 61 2024-07-08 03:20 27 ******** 62 2024-07-08 03:30 27 ******** 63 2024-07-08 03:40 28 ********* 64 2024-07-08 03:50 27 ******** 65 2024-07-08 04:00 28 ********* 66 2024-07-08 04:10 27 ******** ... ..( 5 skipped). .. ******** 72 2024-07-08 05:10 27 ******** 73 2024-07-08 05:20 28 ********* 74 2024-07-08 05:30 27 ******** ... ..( 2 skipped). .. ******** 77 2024-07-08 06:00 27 ******** 78 2024-07-08 06:10 28 ********* ... ..( 3 skipped). .. ********* 82 2024-07-08 06:50 28 ********* 83 2024-07-08 07:00 27 ******** 84 2024-07-08 07:10 27 ******** 85 2024-07-08 07:20 28 ********* 86 2024-07-08 07:30 27 ******** 87 2024-07-08 07:40 27 ******** 88 2024-07-08 07:50 28 ********* 89 2024-07-08 08:00 27 ******** 90 2024-07-08 08:10 28 ********* ... ..( 22 skipped). .. ********* 113 2024-07-08 12:00 28 ********* 114 2024-07-08 12:10 29 ********** 115 2024-07-08 12:20 28 ********* 116 2024-07-08 12:30 29 ********** 117 2024-07-08 12:40 28 ********* ... ..( 7 skipped). .. ********* 125 2024-07-08 14:00 28 ********* 126 2024-07-08 14:10 26 ******* 127 2024-07-08 14:20 28 ********* 0 2024-07-08 14:30 28 ********* 1 2024-07-08 14:40 28 ********* 2 2024-07-08 14:50 29 ********** 3 2024-07-08 15:00 28 ********* ... ..( 3 skipped). .. ********* 7 2024-07-08 15:40 28 ********* 8 2024-07-08 15:50 29 ********** 9 2024-07-08 16:00 27 ******** 10 2024-07-08 16:10 25 ****** ... ..( 2 skipped). .. ****** 13 2024-07-08 16:40 25 ****** 14 2024-07-08 16:50 27 ******** 15 2024-07-08 17:00 28 ********* 16 2024-07-08 17:10 29 ********** ... ..( 19 skipped). .. ********** 36 2024-07-08 20:30 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 6 --- Lifetime Power-On Resets 0x01 0x010 4 29210 --- Power-on Hours 0x01 0x018 6 684268269912 --- Logical Sectors Written 0x01 0x020 6 15711472405 --- Number of Write Commands 0x01 0x028 6 2417525603595 --- Logical Sectors Read 0x01 0x030 6 40601288003 --- Number of Read Commands 0x01 0x038 6 2746000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 39 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 7 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC