/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG SSD PM871 mSATA 256GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT42D0Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: mSATA TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Nov 21 22:12:48 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 12 Power_Cycle_Count PO--CK 098 098 000 - 1204 175 Program_Fail_Count_Chip PO--CK 100 100 010 - 0 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--C- 062 062 005 - 803 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 778 181 Program_Fail_Cnt_Total PO--CK 100 100 010 - 0 182 Erase_Fail_Count_Total PO--CK 100 100 010 - 0 187 Uncorrectable_Error_Cnt PO--CK 100 100 000 - 0 195 ECC_Error_Rate PO-RC- 200 200 000 - 0 241 Total_LBAs_Written PO--CK 099 099 000 - 68877484161 242 Total_LBAs_Read PO--CK 099 099 000 - 16332139281 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 12639 - # 2 Short offline Completed without error 00% 12579 - # 3 Short offline Completed without error 00% 12555 - # 4 Short offline Completed without error 00% 12517 - # 5 Short offline Completed without error 00% 12493 - # 6 Short offline Completed without error 00% 12469 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 32/40 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (55) Index Estimated Time Temperature Celsius 56 2023-11-21 01:00 36 ***************** ... ..( 7 skipped). .. ***************** 64 2023-11-21 02:20 36 ***************** 65 2023-11-21 02:30 35 **************** 66 2023-11-21 02:40 35 **************** 67 2023-11-21 02:50 35 **************** 68 2023-11-21 03:00 37 ****************** 69 2023-11-21 03:10 35 **************** ... ..( 34 skipped). .. **************** 104 2023-11-21 09:00 35 **************** 105 2023-11-21 09:10 34 *************** ... ..( 3 skipped). .. *************** 109 2023-11-21 09:50 34 *************** 110 2023-11-21 10:00 35 **************** 111 2023-11-21 10:10 34 *************** ... ..( 4 skipped). .. *************** 116 2023-11-21 11:00 34 *************** 117 2023-11-21 11:10 35 **************** 118 2023-11-21 11:20 34 *************** ... ..( 42 skipped). .. *************** 33 2023-11-21 18:30 34 *************** 34 2023-11-21 18:40 35 **************** 35 2023-11-21 18:50 35 **************** 36 2023-11-21 19:00 36 ***************** ... ..( 5 skipped). .. ***************** 42 2023-11-21 20:00 36 ***************** 43 2023-11-21 20:10 35 **************** 44 2023-11-21 20:20 36 ***************** 45 2023-11-21 20:30 35 **************** ... ..( 2 skipped). .. **************** 48 2023-11-21 21:00 35 **************** 49 2023-11-21 21:10 36 ***************** 50 2023-11-21 21:20 36 ***************** 51 2023-11-21 21:30 35 **************** ... ..( 3 skipped). .. **************** 55 2023-11-21 22:10 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SK hynix SATA SSDs Device Model: SK hynix SC300 M.2 2280 256GB Serial Number: -- Firmware Version: 20100P00 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Nov 21 22:12:48 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6) seconds. Offline data collection capabilities: (0x59) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 5 Retired_Block_Count -O--CK 253 253 036 - 0 9 Power_On_Hours -O--CK 079 079 000 - 19378 12 Power_Cycle_Count -O--CK 100 100 020 - 2199 100 Total_Erase_Count -O--CK 100 099 000 - 65788735 171 Program_Fail_Count -O--CK 253 253 000 - 0 172 Erase_Fail_Count -O--CK 253 253 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 604 175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 177 Wear_Leveling_Count -O--CK 067 067 000 - 1010 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 50 179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 152 180 Erase_Fail_Count -O--CK 100 100 000 - 4104 181 Non4k_Aligned_Access -O--CK 253 253 000 - 0 182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0 183 SATA_Downshift_Count -O--CK 253 253 000 - 0 187 Reported_Uncorrect -O--CK 253 253 000 - 0 188 Command_Timeout -O--CK 253 253 000 - 0 191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0 194 Temperature_Celsius -O---- 036 000 000 - 36 (Min/Max 17/55) 195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0 201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0 204 Soft_ECC_Correction -OSR-- 100 100 000 - 0 231 SSD_Life_Left PO--CK 093 093 010 - 8 234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 255607 241 Total_Writes_GB -O--CK 100 100 000 - 35471 242 Total_Reads_GB -O--CK 100 100 000 - 10137 250 Read_Retry_Count -O--CK 100 100 000 - 9824 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 4 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 6705 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6705 [4] occurred at disk power-on lifetime: 19305 hours (804 days + 9 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.920 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.920 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.920 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.920 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.910 NOP [Abort queued commands] Error 6704 [3] occurred at disk power-on lifetime: 19305 hours (804 days + 9 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.920 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.920 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.910 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.910 NOP [Abort queued commands] 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:13.450 READ DMA EXT Error 6703 [2] occurred at disk power-on lifetime: 19305 hours (804 days + 9 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.910 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.910 NOP [Abort queued commands] 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:13.450 READ DMA EXT 25 00 d0 02 00 00 00 1d cf 2d 08 40 40 00:00:13.450 READ DMA EXT 25 00 d0 00 08 00 00 1d cf 2d 00 40 40 00:00:13.450 READ DMA EXT Error 6702 [1] occurred at disk power-on lifetime: 19305 hours (804 days + 9 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:13.450 READ DMA EXT 25 00 d0 02 00 00 00 1d cf 2d 08 40 40 00:00:13.450 READ DMA EXT 25 00 d0 00 08 00 00 1d cf 2d 00 40 40 00:00:13.450 READ DMA EXT 25 00 d0 02 00 00 00 01 08 2b 08 40 40 00:00:13.440 READ DMA EXT 25 00 d0 02 00 00 00 01 08 29 08 40 40 00:00:13.440 READ DMA EXT Error 6701 [0] occurred at disk power-on lifetime: 19305 hours (804 days + 9 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:13.450 READ DMA EXT 25 00 d0 02 00 00 00 1d cf 2d 08 40 40 00:00:13.450 READ DMA EXT 25 00 d0 00 08 00 00 1d cf 2d 00 40 40 00:00:13.450 READ DMA EXT 25 00 d0 02 00 00 00 01 08 2b 08 40 40 00:00:13.440 READ DMA EXT 25 00 d0 02 00 00 00 01 08 29 08 40 40 00:00:13.440 READ DMA EXT Error 6700 [19] occurred at disk power-on lifetime: 19304 hours (804 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.320 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.320 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.320 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.320 NOP [Abort queued commands] 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:12.690 READ DMA EXT Error 6699 [18] occurred at disk power-on lifetime: 19304 hours (804 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 50 00 01 00 00 00 00 00 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.320 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.320 NOP [Abort queued commands] 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:12.690 READ DMA EXT 25 00 d0 02 00 00 00 1d cf 2d 08 40 40 00:00:12.690 READ DMA EXT 25 00 d0 00 08 00 00 1d cf 2d 00 40 40 00:00:12.690 READ DMA EXT Error 6698 [17] occurred at disk power-on lifetime: 19304 hours (804 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 d0 00 f8 00 00 1d cf 2f 08 40 40 00:00:12.690 READ DMA EXT 25 00 d0 02 00 00 00 1d cf 2d 08 40 40 00:00:12.690 READ DMA EXT 25 00 d0 00 08 00 00 1d cf 2d 00 40 40 00:00:12.690 READ DMA EXT 25 00 d0 02 00 00 00 01 08 2b 08 40 40 00:00:12.680 READ DMA EXT 25 00 d0 02 00 00 00 01 08 29 08 40 40 00:00:12.680 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14397 - # 2 Short offline Completed without error 00% 14376 - # 3 Short offline Completed without error 00% 14352 - # 4 Short offline Completed without error 00% 14328 - # 5 Short offline Completed without error 00% 14314 - # 6 Short offline Completed without error 00% 14290 - # 7 Short offline Completed without error 00% 14266 - # 8 Short offline Completed without error 00% 14242 - # 9 Short offline Completed without error 00% 3955 - #10 Short offline Completed without error 00% 1 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (empty) == 0x05 ===== = = === == Temperature Statistics (empty) == 0x06 ===== = = === == Transport Statistics (empty) == 0x07 ===== = = === == Solid State Device Statistics (empty) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET