/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p3 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: AirDisk NGFF SSD 256GB Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: SN15011 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Aug 22 15:36:16 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 20 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct ------+ 100 100 010 - 0 9 Power_On_Hours ------+ 100 100 000 - 7 12 Power_Cycle_Count ------+ 100 100 000 - 8 164 Unknown_Attribute ------ 100 100 000 - 4295098369 165 Unknown_Attribute ------ 100 100 000 - 2 166 Unknown_Attribute ------ 100 100 000 - 1 167 Unknown_Attribute ------+ 100 100 000 - 1 194 Temperature_Celsius ------+ 038 038 000 - 38 (Min/Max 29/40) 199 UDMA_CRC_Error_Count ------+ 100 100 000 - 0 241 Total_LBAs_Written ------+ 100 100 000 - 25 242 Total_LBAs_Read ------+ 100 100 000 - 9 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: ?/37 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (32) Index Estimated Time Temperature Celsius 33 2024-08-22 07:39 ? - ... ..(445 skipped). .. - 1 2024-08-22 15:05 ? - 2 2024-08-22 15:06 32 ************* 3 2024-08-22 15:07 ? - ... ..( 3 skipped). .. - 7 2024-08-22 15:11 ? - 8 2024-08-22 15:12 35 **************** 9 2024-08-22 15:13 35 **************** 10 2024-08-22 15:14 35 **************** 11 2024-08-22 15:15 34 *************** 12 2024-08-22 15:16 40 ********************* 13 2024-08-22 15:17 ? - 14 2024-08-22 15:18 36 ***************** 15 2024-08-22 15:19 35 **************** 16 2024-08-22 15:20 36 ***************** 17 2024-08-22 15:21 ? - 18 2024-08-22 15:22 33 ************** 19 2024-08-22 15:23 34 *************** 20 2024-08-22 15:24 ? - 21 2024-08-22 15:25 33 ************** 22 2024-08-22 15:26 33 ************** 23 2024-08-22 15:27 ? - 24 2024-08-22 15:28 32 ************* 25 2024-08-22 15:29 33 ************** 26 2024-08-22 15:30 34 *************** 27 2024-08-22 15:31 35 **************** 28 2024-08-22 15:32 ? - 29 2024-08-22 15:33 ? - 30 2024-08-22 15:34 36 ***************** 31 2024-08-22 15:35 37 ****************** 32 2024-08-22 15:36 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 8 --- Lifetime Power-On Resets 0x01 0x010 4 7 --- Power-on Hours 0x01 0x018 6 53434178 --- Logical Sectors Written 0x01 0x020 6 294659 --- Number of Write Commands 0x01 0x028 6 19769628 --- Logical Sectors Read 0x01 0x030 6 417043 --- Number of Read Commands 0x01 0x038 6 4313370596 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 23 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC