Probe #c6b9f29f41 of Sophos UTM

Log: smartctl

/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD2503ABYX-01WERA1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01S02 User Capacity: 251,059,544,064 bytes [251 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jun 5 21:10:45 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4080) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 44) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 7 3 Spin_Up_Time POS--K 149 139 021 - 3508 4 Start_Stop_Count -O--CK 100 100 000 - 236 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 066 066 000 - 25059 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 234 192 Power-Off_Retract_Count -O--CK 200 200 000 - 196 193 Load_Cycle_Count -O--CK 200 200 000 - 39 194 Temperature_Celsius -O---K 104 099 000 - 39 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 25/41 Celsius Lifetime Min/Max Temperature: 19/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (109) Index Estimated Time Temperature Celsius 110 2022-06-05 13:13 41 ********************** ... ..( 89 skipped). .. ********************** 200 2022-06-05 14:43 41 ********************** 201 2022-06-05 14:44 40 ********************* ... ..( 42 skipped). .. ********************* 244 2022-06-05 15:27 40 ********************* 245 2022-06-05 15:28 39 ******************** 246 2022-06-05 15:29 39 ******************** 247 2022-06-05 15:30 40 ********************* 248 2022-06-05 15:31 39 ******************** 249 2022-06-05 15:32 40 ********************* 250 2022-06-05 15:33 39 ******************** 251 2022-06-05 15:34 39 ******************** 252 2022-06-05 15:35 39 ******************** 253 2022-06-05 15:36 40 ********************* 254 2022-06-05 15:37 40 ********************* 255 2022-06-05 15:38 39 ******************** ... ..( 47 skipped). .. ******************** 303 2022-06-05 16:26 39 ******************** 304 2022-06-05 16:27 40 ********************* ... ..( 52 skipped). .. ********************* 357 2022-06-05 17:20 40 ********************* 358 2022-06-05 17:21 39 ******************** 359 2022-06-05 17:22 39 ******************** 360 2022-06-05 17:23 40 ********************* 361 2022-06-05 17:24 40 ********************* 362 2022-06-05 17:25 39 ******************** 363 2022-06-05 17:26 40 ********************* ... ..( 4 skipped). .. ********************* 368 2022-06-05 17:31 40 ********************* 369 2022-06-05 17:32 39 ******************** 370 2022-06-05 17:33 40 ********************* 371 2022-06-05 17:34 40 ********************* 372 2022-06-05 17:35 40 ********************* 373 2022-06-05 17:36 39 ******************** 374 2022-06-05 17:37 40 ********************* 375 2022-06-05 17:38 40 ********************* 376 2022-06-05 17:39 39 ******************** 377 2022-06-05 17:40 39 ******************** 378 2022-06-05 17:41 40 ********************* 379 2022-06-05 17:42 39 ******************** ... ..( 2 skipped). .. ******************** 382 2022-06-05 17:45 39 ******************** 383 2022-06-05 17:46 40 ********************* 384 2022-06-05 17:47 40 ********************* 385 2022-06-05 17:48 39 ******************** ... ..( 2 skipped). .. ******************** 388 2022-06-05 17:51 39 ******************** 389 2022-06-05 17:52 40 ********************* 390 2022-06-05 17:53 39 ******************** 391 2022-06-05 17:54 39 ******************** 392 2022-06-05 17:55 39 ******************** 393 2022-06-05 17:56 40 ********************* 394 2022-06-05 17:57 40 ********************* 395 2022-06-05 17:58 39 ******************** 396 2022-06-05 17:59 40 ********************* 397 2022-06-05 18:00 39 ******************** 398 2022-06-05 18:01 40 ********************* 399 2022-06-05 18:02 39 ******************** 400 2022-06-05 18:03 40 ********************* ... ..( 85 skipped). .. ********************* 8 2022-06-05 19:29 40 ********************* 9 2022-06-05 19:30 41 ********************** 10 2022-06-05 19:31 40 ********************* 11 2022-06-05 19:32 41 ********************** 12 2022-06-05 19:33 40 ********************* 13 2022-06-05 19:34 40 ********************* 14 2022-06-05 19:35 40 ********************* 15 2022-06-05 19:36 41 ********************** 16 2022-06-05 19:37 40 ********************* 17 2022-06-05 19:38 41 ********************** 18 2022-06-05 19:39 40 ********************* 19 2022-06-05 19:40 40 ********************* 20 2022-06-05 19:41 41 ********************** ... ..( 88 skipped). .. ********************** 109 2022-06-05 21:10 41 ********************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 47793 Vendor specific


Hardware for Linux and BSD

GitHub