/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SK hynix SATA SSDs Device Model: SK hynix SC308 SATA 128GB Serial Number: -- Firmware Version: 30001P10 User Capacity: 128,035,676,160 bytes [128 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Sep 15 16:18:50 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 36) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 105) seconds. Offline data collection capabilities: (0x19) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0 5 Retired_Block_Count -O--CK 100 100 036 - 1 9 Power_On_Hours -O--CK 081 081 000 - 17618 12 Power_Cycle_Count -O--CK 100 100 020 - 1283 100 Total_Erase_Count -O--CK 100 100 000 - 4121363 171 Program_Fail_Count -O--CK 253 253 000 - 0 172 Erase_Fail_Count -O--CK 253 253 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 189 175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0 176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0 177 Wear_Leveling_Count -O--CK 089 089 000 - 125 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 35 179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 165 180 Erase_Fail_Count -O--CK 100 100 000 - 2475 181 Non4k_Aligned_Access -O--CK 253 253 000 - 0 182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0 183 SATA_Downshift_Count -O--CK 253 253 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 61 188 Command_Timeout -O--CK 253 253 000 - 0 191 Unknown_SK_hynix_Attrib -O--CK 253 253 000 - 0 194 Temperature_Celsius -O---- 028 000 000 - 28 (Min/Max 14/46) 195 Hardware_ECC_Recovered -O--CK 097 088 000 - 147956221 199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0 201 Percent_Lifetime_Remain -OSR-- 100 100 000 - 0 204 Soft_ECC_Correction -OSR-- 100 001 000 - 1265 231 SSD_Life_Left PO--CK 090 090 010 - 11 234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 33803710048 241 Total_Writes_GB -O--CK 100 100 000 - 5445951094 242 Total_Reads_GB -O--CK 100 100 000 - 9025329486 250 Read_Retry_Count -O--CK 100 100 000 - 33125613 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 4 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 17 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 17 [16] occurred at disk power-on lifetime: 8774 hours (365 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:02:01.280 SMART READ LOG 20 00 00 00 01 00 00 00 00 00 00 40 40 00:02:01.280 READ SECTOR(S) b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:02:01.280 SMART READ LOG ec 00 00 00 01 00 00 00 00 00 00 40 40 00:02:01.280 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:55.590 IDENTIFY DEVICE Error 16 [15] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b0 00 00 02 17 a9 48 40 40 00:01:15.950 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.930 READ LOG EXT 60 00 08 00 a8 00 00 02 17 a9 48 40 40 00:01:15.920 READ FPDMA QUEUED 60 00 08 00 a0 00 00 02 17 a9 40 40 40 00:01:15.920 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.900 READ LOG EXT Error 15 [14] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 00 02 17 a9 48 40 40 00:01:15.920 READ FPDMA QUEUED 60 00 08 00 a0 00 00 02 17 a9 40 40 40 00:01:15.920 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.900 READ LOG EXT 60 00 08 00 98 00 00 02 17 a9 38 40 40 00:01:15.880 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.860 READ LOG EXT Error 14 [13] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 98 00 00 02 17 a9 38 40 40 00:01:15.880 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.860 READ LOG EXT 60 00 08 00 90 00 00 02 17 a9 38 40 40 00:01:15.850 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.830 READ LOG EXT 60 00 08 00 88 00 00 02 17 a9 30 40 40 00:01:15.810 READ FPDMA QUEUED Error 13 [12] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 90 00 00 02 17 a9 38 40 40 00:01:15.850 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.830 READ LOG EXT 60 00 08 00 88 00 00 02 17 a9 30 40 40 00:01:15.810 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.800 READ LOG EXT 60 00 08 00 80 00 00 02 17 a9 30 40 40 00:01:15.790 READ FPDMA QUEUED Error 12 [11] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 88 00 00 02 17 a9 30 40 40 00:01:15.810 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.800 READ LOG EXT 60 00 08 00 80 00 00 02 17 a9 30 40 40 00:01:15.790 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.780 READ LOG EXT 60 00 08 00 78 00 00 02 17 a9 28 40 40 00:01:15.750 READ FPDMA QUEUED Error 11 [10] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 80 00 00 02 17 a9 30 40 40 00:01:15.790 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.780 READ LOG EXT 60 00 08 00 78 00 00 02 17 a9 28 40 40 00:01:15.750 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.730 READ LOG EXT 60 00 08 00 70 00 00 02 17 a9 28 40 40 00:01:15.720 READ FPDMA QUEUED Error 10 [9] occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 78 00 00 02 17 a9 28 40 40 00:01:15.750 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.730 READ LOG EXT 60 00 08 00 70 00 00 02 17 a9 28 40 40 00:01:15.720 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 28 00:01:15.710 READ LOG EXT 60 00 08 00 68 00 00 02 17 a9 20 40 40 00:01:15.690 READ FPDMA QUEUED Warning! SMART Extended Self-test Log Structure (1/2) error: invalid SMART checksum. SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14493 - # 2 Short offline Completed without error 90% 12953 - # 3 Short offline Aborted by host 80% 8774 - # 4 Short offline Completed without error 00% 8774 - # 5 Short offline Completed without error 00% 8734 - # 6 Short offline Completed without error 00% 8370 - # 7 Extended offline Completed without error 00% 7940 - # 8 Extended offline Completed without error 90% 6995 - # 9 Short offline Completed without error 00% 2425 - #10 Extended offline Completed without error 00% 2303 - #11 Short offline Completed without error 00% 2302 - #12 Short offline Completed without error 00% 2278 - #13 Short offline Completed without error 00% 2254 - #14 Short offline Completed without error 00% 2239 - #15 Short offline Completed without error 90% 2169 - #16 Extended offline Completed without error 00% 2146 - #17 Short offline Completed without error 00% 2145 - #18 Short offline Completed without error 00% 2120 - #19 Short offline Completed without error 90% 2096 - #20 Short offline Completed without error 00% 2072 - #21 Short offline Completed without error 00% 1743 - #22 Short offline Completed without error 00% 1719 - #23 Extended offline Completed without error 00% 1231 - #24 Short offline Completed without error 00% 0 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (empty) == 0x05 ===== = = === == Temperature Statistics (empty) == 0x06 ===== = = === == Transport Statistics (empty) == 0x07 ===== = = === == Solid State Device Statistics (empty) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z7K500 Device Model: HGST HTS725050A7E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GS2OA3C0 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Sep 15 16:18:50 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5036) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 86) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 198 100 040 - 97 3 Spin_Up_Time PO---K 242 100 033 - 1 4 Start_Stop_Count -O--CK 099 099 000 - 1915 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 134 100 040 - 46 9 Power_On_Hours -O--CK 024 024 000 - 33546 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1882 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 55834771456 188 Command_Timeout -O--CK 100 100 000 - 94506582016 190 Airflow_Temperature_Cel -O---K 067 054 045 - 33 (Min/Max 21/43) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 64 192 Power-Off_Retract_Count -O--CK 099 099 000 - 18415897 193 Load_Cycle_Count -O--CK 001 001 000 - 1345350 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 29134 - # 2 Short offline Completed without error 00% 23335 - # 3 Short offline Completed without error 00% 23082 - # 4 Short offline Completed without error 00% 22763 - # 5 Short offline Completed without error 00% 22329 - # 6 Short offline Completed without error 00% 20604 - # 7 Short offline Completed without error 00% 20516 - # 8 Short offline Completed without error 00% 18002 - # 9 Extended offline Completed without error 00% 15703 - #10 Short offline Completed without error 00% 15701 - #11 Short offline Completed without error 00% 15644 - #12 Extended offline Completed without error 00% 15535 - #13 Short offline Completed without error 00% 15532 - #14 Short offline Completed without error 00% 15508 - #15 Short offline Completed without error 00% 15484 - #16 Short offline Completed without error 00% 15460 - #17 Short offline Completed without error 00% 15389 - #18 Extended offline Completed without error 00% 15367 - #19 Short offline Completed without error 00% 15365 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 21/43 Celsius Lifetime Min/Max Temperature: 15/46 Celsius Specified Max Operating Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (3) Index Estimated Time Temperature Celsius 4 2024-09-15 14:11 33 ************** ... ..( 3 skipped). .. ************** 8 2024-09-15 14:15 33 ************** 9 2024-09-15 14:16 34 *************** 10 2024-09-15 14:17 34 *************** 11 2024-09-15 14:18 34 *************** 12 2024-09-15 14:19 33 ************** ... ..( 10 skipped). .. ************** 23 2024-09-15 14:30 33 ************** 24 2024-09-15 14:31 32 ************* 25 2024-09-15 14:32 33 ************** 26 2024-09-15 14:33 33 ************** 27 2024-09-15 14:34 35 **************** 28 2024-09-15 14:35 35 **************** 29 2024-09-15 14:36 34 *************** ... ..( 5 skipped). .. *************** 35 2024-09-15 14:42 34 *************** 36 2024-09-15 14:43 33 ************** 37 2024-09-15 14:44 33 ************** 38 2024-09-15 14:45 34 *************** 39 2024-09-15 14:46 34 *************** 40 2024-09-15 14:47 34 *************** 41 2024-09-15 14:48 35 **************** 42 2024-09-15 14:49 34 *************** ... ..( 6 skipped). .. *************** 49 2024-09-15 14:56 34 *************** 50 2024-09-15 14:57 33 ************** 51 2024-09-15 14:58 33 ************** 52 2024-09-15 14:59 34 *************** ... ..( 2 skipped). .. *************** 55 2024-09-15 15:02 34 *************** 56 2024-09-15 15:03 33 ************** 57 2024-09-15 15:04 33 ************** 58 2024-09-15 15:05 34 *************** 59 2024-09-15 15:06 35 **************** 60 2024-09-15 15:07 34 *************** ... ..( 5 skipped). .. *************** 66 2024-09-15 15:13 34 *************** 67 2024-09-15 15:14 33 ************** ... ..( 21 skipped). .. ************** 89 2024-09-15 15:36 33 ************** 90 2024-09-15 15:37 34 *************** ... ..( 2 skipped). .. *************** 93 2024-09-15 15:40 34 *************** 94 2024-09-15 15:41 33 ************** 95 2024-09-15 15:42 34 *************** 96 2024-09-15 15:43 34 *************** 97 2024-09-15 15:44 34 *************** 98 2024-09-15 15:45 33 ************** ... ..( 32 skipped). .. ************** 3 2024-09-15 16:18 33 ************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS