/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..55GSX Device Model: TOSHIBA MK1655GSX Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: FG011M User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Apr 8 16:44:22 2025 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 73) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 1011 4 Start_Stop_Count -O--CK 100 100 000 - 973 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 36 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 095 095 000 - 2231 10 Spin_Retry_Count PO--CK 119 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 959 191 G-Sense_Error_Rate -O--CK 100 100 000 - 252 192 Power-Off_Retract_Count -O--CK 100 100 000 - 46 193 Load_Cycle_Count -O--CK 097 097 000 - 35270 194 Temperature_Celsius -O---K 100 100 000 - 36 (Min/Max 19/46) 196 Reallocated_Event_Count -O--CK 100 100 000 - 5 197 Current_Pending_Sector -O--CK 100 100 000 - 1 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 6 220 Disk_Shift -O---- 100 100 000 - 61 222 Loaded_Hours -O--CK 096 096 000 - 1683 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 338 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 1351 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1351 [70] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 a1 9e af b2 ee e0 e1 00 12:17:16.569 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 12:17:16.569 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 45 00 00 00 00 00 00 00 a0 00 12:17:16.567 IDENTIFY DEVICE ef 00 03 00 45 a1 9e af 00 00 00 a0 00 12:17:16.567 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 12:17:16.567 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1350 [69] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 a1 9e af b2 ee e0 e1 00 12:17:12.682 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 12:17:12.682 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 45 00 00 00 00 00 00 00 a0 00 12:17:12.680 IDENTIFY DEVICE ef 00 03 00 45 a1 9e af 00 00 00 a0 00 12:17:12.679 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 12:17:12.679 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1349 [68] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 57 25 ef b2 ee e0 e1 00 12:17:08.759 READ DMA ea 00 00 00 00 57 25 e7 57 25 ef a0 00 12:17:08.396 FLUSH CACHE EXT ca 00 00 00 08 57 25 e7 57 25 e8 e9 00 12:17:08.395 WRITE DMA ea 00 00 00 00 f4 26 ef 57 25 e7 a0 00 12:17:08.366 FLUSH CACHE EXT ca 00 00 00 40 f4 26 ef 57 25 a8 e9 00 12:17:08.366 WRITE DMA Error 1348 [67] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 68 33 57 b2 ee e0 e1 00 12:16:03.698 READ DMA ca 00 00 00 08 a1 9e af 68 33 50 e1 00 12:16:03.697 WRITE DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 12:16:03.697 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 45 00 00 00 00 00 00 00 a0 00 12:16:03.695 IDENTIFY DEVICE ef 00 03 00 45 a1 9e af 00 00 00 a0 00 12:16:03.695 SET FEATURES [Set transfer mode] Error 1347 [66] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 68 33 37 b2 ee e0 e1 00 12:15:59.768 READ DMA ca 00 00 00 10 68 54 0f 68 33 28 e1 00 12:15:59.768 WRITE DMA ca 00 00 00 50 68 33 3f 68 53 c0 e1 00 12:15:59.768 WRITE DMA ca 00 00 00 08 68 33 1f 68 33 38 e1 00 12:15:59.767 WRITE DMA ca 00 00 00 10 68 17 ff 68 33 10 e1 00 12:15:59.767 WRITE DMA Error 1346 [65] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 fa 00 00 01 b2 ee e6 e1 00 Error: UNC 250 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 00 b2 ee df b2 ee e0 e1 00 12:15:55.884 READ DMA c8 00 00 00 00 b2 ed df b2 ed e0 e1 00 12:15:55.882 READ DMA c8 00 00 00 00 b2 ec df b2 ec e0 e1 00 12:15:55.879 READ DMA c8 00 00 00 00 b2 eb df b2 eb e0 e1 00 12:15:55.878 READ DMA c8 00 00 00 00 b2 ea df b2 ea e0 e1 00 12:15:55.876 READ DMA Error 1345 [64] occurred at disk power-on lifetime: 1886 hours (78 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 68 6f ff b2 ee e0 e1 00 07:17:13.483 READ DMA 35 00 00 04 00 00 00 05 68 6c 00 e0 00 07:17:13.481 WRITE DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 07:17:13.481 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 45 00 00 00 00 00 00 00 a0 00 07:17:13.479 IDENTIFY DEVICE ef 00 03 00 45 a1 9e af 00 00 00 a0 00 07:17:13.479 SET FEATURES [Set transfer mode] Error 1344 [63] occurred at disk power-on lifetime: 1886 hours (78 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 01 b2 ee e6 e1 00 Error: UNC 2 sectors at LBA = 0x01b2eee6 = 28503782 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 68 6b ff b2 ee e0 e1 00 07:17:09.594 READ DMA 35 00 00 04 00 00 00 05 68 68 00 e0 00 07:17:09.591 WRITE DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 07:17:09.591 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 45 00 00 00 00 00 00 00 a0 00 07:17:09.589 IDENTIFY DEVICE ef 00 03 00 45 a1 9e af 00 00 00 a0 00 07:17:09.589 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: --/37 Celsius Lifetime Min/Max Temperature: --/46 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (280) Index Estimated Time Temperature Celsius 281 2025-04-08 08:47 35 **************** ... ..( 7 skipped). .. **************** 289 2025-04-08 08:55 35 **************** 290 2025-04-08 08:56 34 *************** 291 2025-04-08 08:57 35 **************** 292 2025-04-08 08:58 34 *************** 293 2025-04-08 08:59 35 **************** 294 2025-04-08 09:00 34 *************** 295 2025-04-08 09:01 34 *************** 296 2025-04-08 09:02 35 **************** ... ..( 2 skipped). .. **************** 299 2025-04-08 09:05 35 **************** 300 2025-04-08 09:06 34 *************** 301 2025-04-08 09:07 35 **************** 302 2025-04-08 09:08 34 *************** 303 2025-04-08 09:09 34 *************** 304 2025-04-08 09:10 35 **************** 305 2025-04-08 09:11 34 *************** 306 2025-04-08 09:12 35 **************** ... ..( 84 skipped). .. **************** 391 2025-04-08 10:37 35 **************** 392 2025-04-08 10:38 36 ***************** ... ..( 45 skipped). .. ***************** 438 2025-04-08 11:24 36 ***************** 439 2025-04-08 11:25 35 **************** 440 2025-04-08 11:26 35 **************** 441 2025-04-08 11:27 36 ***************** ... ..( 12 skipped). .. ***************** 454 2025-04-08 11:40 36 ***************** 455 2025-04-08 11:41 35 **************** 456 2025-04-08 11:42 36 ***************** 457 2025-04-08 11:43 35 **************** ... ..( 2 skipped). .. **************** 460 2025-04-08 11:46 35 **************** 461 2025-04-08 11:47 36 ***************** 462 2025-04-08 11:48 36 ***************** 463 2025-04-08 11:49 35 **************** 464 2025-04-08 11:50 35 **************** 465 2025-04-08 11:51 35 **************** 466 2025-04-08 11:52 36 ***************** 467 2025-04-08 11:53 36 ***************** 468 2025-04-08 11:54 36 ***************** 469 2025-04-08 11:55 35 **************** 470 2025-04-08 11:56 36 ***************** 471 2025-04-08 11:57 36 ***************** 472 2025-04-08 11:58 35 **************** 473 2025-04-08 11:59 35 **************** 474 2025-04-08 12:00 36 ***************** 475 2025-04-08 12:01 36 ***************** 476 2025-04-08 12:02 35 **************** ... ..( 2 skipped). .. **************** 1 2025-04-08 12:05 35 **************** 2 2025-04-08 12:06 36 ***************** 3 2025-04-08 12:07 35 **************** 4 2025-04-08 12:08 36 ***************** 5 2025-04-08 12:09 35 **************** ... ..( 36 skipped). .. **************** 42 2025-04-08 12:46 35 **************** 43 2025-04-08 12:47 ? - 44 2025-04-08 12:48 35 **************** ... ..( 3 skipped). .. **************** 48 2025-04-08 12:52 35 **************** 49 2025-04-08 12:53 ? - 50 2025-04-08 12:54 ? - 51 2025-04-08 12:55 35 **************** 52 2025-04-08 12:56 ? - 53 2025-04-08 12:57 36 ***************** 54 2025-04-08 12:58 36 ***************** 55 2025-04-08 12:59 36 ***************** 56 2025-04-08 13:00 35 **************** 57 2025-04-08 13:01 ? - 58 2025-04-08 13:02 31 ************ 59 2025-04-08 13:03 32 ************* 60 2025-04-08 13:04 32 ************* 61 2025-04-08 13:05 32 ************* 62 2025-04-08 13:06 33 ************** ... ..( 5 skipped). .. ************** 68 2025-04-08 13:12 33 ************** 69 2025-04-08 13:13 34 *************** ... ..( 37 skipped). .. *************** 107 2025-04-08 13:51 34 *************** 108 2025-04-08 13:52 35 **************** 109 2025-04-08 13:53 35 **************** 110 2025-04-08 13:54 36 ***************** ... ..( 4 skipped). .. ***************** 115 2025-04-08 13:59 36 ***************** 116 2025-04-08 14:00 35 **************** ... ..( 61 skipped). .. **************** 178 2025-04-08 15:02 35 **************** 179 2025-04-08 15:03 36 ***************** 180 2025-04-08 15:04 ? - 181 2025-04-08 15:05 31 ************ 182 2025-04-08 15:06 33 ************** 183 2025-04-08 15:07 33 ************** 184 2025-04-08 15:08 34 *************** ... ..( 16 skipped). .. *************** 201 2025-04-08 15:25 34 *************** 202 2025-04-08 15:26 35 **************** 203 2025-04-08 15:27 34 *************** 204 2025-04-08 15:28 35 **************** ... ..( 4 skipped). .. **************** 209 2025-04-08 15:33 35 **************** 210 2025-04-08 15:34 36 ***************** ... ..( 7 skipped). .. ***************** 218 2025-04-08 15:42 36 ***************** 219 2025-04-08 15:43 35 **************** ... ..( 17 skipped). .. **************** 237 2025-04-08 16:01 35 **************** 238 2025-04-08 16:02 36 ***************** ... ..( 41 skipped). .. ***************** 280 2025-04-08 16:44 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD10EARX-22N0YB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 51.0AB51 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 8 16:44:22 2025 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (17880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 175) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 115 114 021 - 7250 4 Start_Stop_Count -O--CK 099 099 000 - 1730 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4394 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1623 192 Power-Off_Retract_Count -O--CK 200 200 000 - 558 193 Load_Cycle_Count -O--CK 141 141 000 - 177966 194 Temperature_Celsius -O---K 110 102 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 186 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 30/37 Celsius Lifetime Min/Max Temperature: 0/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (66) Index Estimated Time Temperature Celsius 67 2025-04-08 08:47 35 **************** 68 2025-04-08 08:48 35 **************** 69 2025-04-08 08:49 35 **************** 70 2025-04-08 08:50 36 ***************** ... ..( 93 skipped). .. ***************** 164 2025-04-08 10:24 36 ***************** 165 2025-04-08 10:25 ? - 166 2025-04-08 10:26 30 *********** 167 2025-04-08 10:27 30 *********** 168 2025-04-08 10:28 30 *********** 169 2025-04-08 10:29 31 ************ 170 2025-04-08 10:30 31 ************ 171 2025-04-08 10:31 31 ************ 172 2025-04-08 10:32 32 ************* ... ..( 3 skipped). .. ************* 176 2025-04-08 10:36 32 ************* 177 2025-04-08 10:37 33 ************** ... ..( 3 skipped). .. ************** 181 2025-04-08 10:41 33 ************** 182 2025-04-08 10:42 34 *************** 183 2025-04-08 10:43 34 *************** 184 2025-04-08 10:44 34 *************** 185 2025-04-08 10:45 35 **************** 186 2025-04-08 10:46 34 *************** 187 2025-04-08 10:47 34 *************** 188 2025-04-08 10:48 35 **************** ... ..( 16 skipped). .. **************** 205 2025-04-08 11:05 35 **************** 206 2025-04-08 11:06 36 ***************** ... ..( 22 skipped). .. ***************** 229 2025-04-08 11:29 36 ***************** 230 2025-04-08 11:30 37 ****************** 231 2025-04-08 11:31 37 ****************** 232 2025-04-08 11:32 36 ***************** 233 2025-04-08 11:33 37 ****************** 234 2025-04-08 11:34 36 ***************** 235 2025-04-08 11:35 36 ***************** 236 2025-04-08 11:36 37 ****************** 237 2025-04-08 11:37 36 ***************** ... ..( 2 skipped). .. ***************** 240 2025-04-08 11:40 36 ***************** 241 2025-04-08 11:41 37 ****************** ... ..( 24 skipped). .. ****************** 266 2025-04-08 12:06 37 ****************** 267 2025-04-08 12:07 30 *********** 268 2025-04-08 12:08 ? - 269 2025-04-08 12:09 32 ************* 270 2025-04-08 12:10 31 ************ 271 2025-04-08 12:11 32 ************* ... ..( 3 skipped). .. ************* 275 2025-04-08 12:15 32 ************* 276 2025-04-08 12:16 33 ************** 277 2025-04-08 12:17 ? - 278 2025-04-08 12:18 35 **************** 279 2025-04-08 12:19 34 *************** 280 2025-04-08 12:20 ? - 281 2025-04-08 12:21 37 ****************** 282 2025-04-08 12:22 ? - 283 2025-04-08 12:23 37 ****************** ... ..( 13 skipped). .. ****************** 297 2025-04-08 12:37 37 ****************** 298 2025-04-08 12:38 36 ***************** 299 2025-04-08 12:39 37 ****************** 300 2025-04-08 12:40 37 ****************** 301 2025-04-08 12:41 37 ****************** 302 2025-04-08 12:42 36 ***************** 303 2025-04-08 12:43 37 ****************** ... ..( 6 skipped). .. ****************** 310 2025-04-08 12:50 37 ****************** 311 2025-04-08 12:51 36 ***************** 312 2025-04-08 12:52 37 ****************** ... ..( 4 skipped). .. ****************** 317 2025-04-08 12:57 37 ****************** 318 2025-04-08 12:58 36 ***************** 319 2025-04-08 12:59 37 ****************** ... ..( 15 skipped). .. ****************** 335 2025-04-08 13:15 37 ****************** 336 2025-04-08 13:16 38 ******************* 337 2025-04-08 13:17 37 ****************** ... ..( 55 skipped). .. ****************** 393 2025-04-08 14:13 37 ****************** 394 2025-04-08 14:14 38 ******************* 395 2025-04-08 14:15 37 ****************** 396 2025-04-08 14:16 38 ******************* 397 2025-04-08 14:17 37 ****************** ... ..( 5 skipped). .. ****************** 403 2025-04-08 14:23 37 ****************** 404 2025-04-08 14:24 38 ******************* 405 2025-04-08 14:25 37 ****************** ... ..( 8 skipped). .. ****************** 414 2025-04-08 14:34 37 ****************** 415 2025-04-08 14:35 38 ******************* 416 2025-04-08 14:36 38 ******************* 417 2025-04-08 14:37 37 ****************** 418 2025-04-08 14:38 37 ****************** 419 2025-04-08 14:39 37 ****************** 420 2025-04-08 14:40 38 ******************* 421 2025-04-08 14:41 37 ****************** ... ..( 47 skipped). .. ****************** 469 2025-04-08 15:29 37 ****************** 470 2025-04-08 15:30 ? - 471 2025-04-08 15:31 38 ******************* 472 2025-04-08 15:32 38 ******************* 473 2025-04-08 15:33 37 ****************** ... ..( 4 skipped). .. ****************** 0 2025-04-08 15:38 37 ****************** 1 2025-04-08 15:39 38 ******************* 2 2025-04-08 15:40 37 ****************** ... ..( 13 skipped). .. ****************** 16 2025-04-08 15:54 37 ****************** 17 2025-04-08 15:55 38 ******************* 18 2025-04-08 15:56 37 ****************** ... ..( 8 skipped). .. ****************** 27 2025-04-08 16:05 37 ****************** 28 2025-04-08 16:06 38 ******************* 29 2025-04-08 16:07 ? - 30 2025-04-08 16:08 38 ******************* 31 2025-04-08 16:09 37 ****************** 32 2025-04-08 16:10 37 ****************** 33 2025-04-08 16:11 38 ******************* 34 2025-04-08 16:12 37 ****************** 35 2025-04-08 16:13 ? - 36 2025-04-08 16:14 38 ******************* 37 2025-04-08 16:15 37 ****************** 38 2025-04-08 16:16 38 ******************* 39 2025-04-08 16:17 ? - 40 2025-04-08 16:18 38 ******************* 41 2025-04-08 16:19 38 ******************* 42 2025-04-08 16:20 ? - 43 2025-04-08 16:21 38 ******************* 44 2025-04-08 16:22 38 ******************* 45 2025-04-08 16:23 37 ****************** 46 2025-04-08 16:24 ? - 47 2025-04-08 16:25 31 ************ 48 2025-04-08 16:26 31 ************ 49 2025-04-08 16:27 32 ************* ... ..( 4 skipped). .. ************* 54 2025-04-08 16:32 32 ************* 55 2025-04-08 16:33 33 ************** ... ..( 4 skipped). .. ************** 60 2025-04-08 16:38 33 ************** 61 2025-04-08 16:39 34 *************** ... ..( 3 skipped). .. *************** 65 2025-04-08 16:43 34 *************** 66 2025-04-08 16:44 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 6054 Vendor specific