/dev/ada0 smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA Device Model: WDC WD1600JS-75NCB2 Serial Number: -- Firmware Version: 10.02E03 User Capacity: 160,000,000,000 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.5/5706 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Jun 22 23:10:23 2025 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 1 3 Spin_Up_Time PO---- 188 172 021 - 3566 4 Start_Stop_Count -O--CK 094 094 000 - 6239 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 018 018 000 - 60205 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6179 190 Airflow_Temperature_Cel -O---K 051 041 045 Past 49 194 Temperature_Celsius -O---K 098 088 000 - 49 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 82 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 82 [9] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 00 00 0d 00 53 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 30 b0 61 91 00 00 00 00 00 c0 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 d5 00 e0 61 2f 00 91 b0 00 c0 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2] 00 e3 c8 61 90 00 01 00 00 00 c0 00 0a 37d+08:33:39.606 NOP [Reserved subcommand] [OBS-ACS-2] 00 a0 00 00 98 61 b7 0a 90 c8 00 c0 00 00:00:14.432 NOP [Abort queued commands] Error 81 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 00 00 0d 00 53 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 5c b0 e7 c4 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 d5 00 e0 e7 5c 00 c4 b0 00 00 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2] 00 21 c8 e7 c4 00 01 00 00 00 00 00 03 04:13:09.068 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 f0 e7 16 03 c4 c8 00 00 00 00:00:12.384 NOP [Abort queued commands] Error 80 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 b5 c8 05 c9 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 69 07 c2 c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 82 c8 05 b3 00 01 00 17 00 00 00 07 00:06:15.498 [RESERVED] 00 01 00 00 17 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] Error 79 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 69 c8 05 c2 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 ca 07 ba c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 17 00 00 00 07 00:06:13.634 [RESERVED] 00 01 00 00 16 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] Error 78 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 ca c8 05 ba 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 82 07 b3 c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 17 00 00 00 07 00:06:11.752 [RESERVED] 00 01 00 00 15 05 28 07 ac c8 00 00 00 00:00:05.633 NOP [Abort queued commands] Error 77 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 82 c8 05 b3 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 17 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 16 00 00 00 07 00:06:11.752 [RESERVED] 00 01 00 00 14 05 28 07 ac c8 00 00 00 00:00:05.377 NOP [Abort queued commands] Error 76 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 28 c8 05 ac 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 16 05 28 07 ac c8 00 00 00 00:00:05.889 NOP [Abort queued commands] 07 28 c8 05 ac 00 01 00 15 00 00 00 07 00:06:11.752 [RESERVED] 00 01 00 00 13 05 28 07 ac c8 00 00 00 00:00:05.121 NOP [Abort queued commands] Error 75 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 47 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 73 c8 05 8d 00 00 00 00 00 00 00 07 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 80 00 00 c0 05 1b 07 86 c8 00 00 00 00:00:49.280 NOP [Abort queued commands] 07 0f c8 05 77 00 80 00 c0 00 00 00 07 00:06:00.139 [RESERVED] 00 80 00 00 c0 05 b4 07 6f c8 00 00 00 00:00:49.280 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 53 Celsius Power Cycle Min/Max Temperature: --/59 Celsius Lifetime Min/Max Temperature: --/60 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/65 Celsius Min/Max Temperature Limit: 1/60 Celsius Temperature History Size (Index): 128 (69) Index Estimated Time Temperature Celsius 70 2025-06-22 21:03 57 ************************************** ... ..( 10 skipped). .. ************************************** 81 2025-06-22 21:14 57 ************************************** 82 2025-06-22 21:15 55 ************************************ 83 2025-06-22 21:16 54 *********************************** 84 2025-06-22 21:17 54 *********************************** 85 2025-06-22 21:18 55 ************************************ 86 2025-06-22 21:19 57 ************************************** 87 2025-06-22 21:20 57 ************************************** 88 2025-06-22 21:21 57 ************************************** 89 2025-06-22 21:22 56 ************************************* 90 2025-06-22 21:23 56 ************************************* 91 2025-06-22 21:24 56 ************************************* 92 2025-06-22 21:25 55 ************************************ 93 2025-06-22 21:26 53 ********************************** 94 2025-06-22 21:27 53 ********************************** 95 2025-06-22 21:28 55 ************************************ ... ..( 2 skipped). .. ************************************ 98 2025-06-22 21:31 55 ************************************ 99 2025-06-22 21:32 57 ************************************** 100 2025-06-22 21:33 55 ************************************ 101 2025-06-22 21:34 55 ************************************ 102 2025-06-22 21:35 55 ************************************ 103 2025-06-22 21:36 56 ************************************* 104 2025-06-22 21:37 57 ************************************** ... ..( 17 skipped). .. ************************************** 122 2025-06-22 21:55 57 ************************************** 123 2025-06-22 21:56 55 ************************************ 124 2025-06-22 21:57 55 ************************************ 125 2025-06-22 21:58 55 ************************************ 126 2025-06-22 21:59 57 ************************************** ... ..( 2 skipped). .. ************************************** 1 2025-06-22 22:02 57 ************************************** 2 2025-06-22 22:03 55 ************************************ 3 2025-06-22 22:04 55 ************************************ 4 2025-06-22 22:05 55 ************************************ 5 2025-06-22 22:06 57 ************************************** ... ..( 6 skipped). .. ************************************** 12 2025-06-22 22:13 57 ************************************** 13 2025-06-22 22:14 56 ************************************* 14 2025-06-22 22:15 56 ************************************* 15 2025-06-22 22:16 56 ************************************* 16 2025-06-22 22:17 57 ************************************** ... ..( 2 skipped). .. ************************************** 19 2025-06-22 22:20 57 ************************************** 20 2025-06-22 22:21 55 ************************************ 21 2025-06-22 22:22 55 ************************************ 22 2025-06-22 22:23 54 *********************************** 23 2025-06-22 22:24 55 ************************************ 24 2025-06-22 22:25 55 ************************************ 25 2025-06-22 22:26 56 ************************************* 26 2025-06-22 22:27 57 ************************************** ... ..( 2 skipped). .. ************************************** 29 2025-06-22 22:30 57 ************************************** 30 2025-06-22 22:31 55 ************************************ 31 2025-06-22 22:32 54 *********************************** 32 2025-06-22 22:33 52 ********************************* 33 2025-06-22 22:34 54 *********************************** 34 2025-06-22 22:35 53 ********************************** 35 2025-06-22 22:36 53 ********************************** 36 2025-06-22 22:37 53 ********************************** 37 2025-06-22 22:38 55 ************************************ 38 2025-06-22 22:39 57 ************************************** ... ..( 4 skipped). .. ************************************** 43 2025-06-22 22:44 57 ************************************** 44 2025-06-22 22:45 55 ************************************ 45 2025-06-22 22:46 53 ********************************** 46 2025-06-22 22:47 52 ********************************* 47 2025-06-22 22:48 53 ********************************** 48 2025-06-22 22:49 54 *********************************** 49 2025-06-22 22:50 55 ************************************ 50 2025-06-22 22:51 56 ************************************* 51 2025-06-22 22:52 56 ************************************* 52 2025-06-22 22:53 55 ************************************ 53 2025-06-22 22:54 54 *********************************** 54 2025-06-22 22:55 53 ********************************** 55 2025-06-22 22:56 53 ********************************** 56 2025-06-22 22:57 52 ********************************* 57 2025-06-22 22:58 51 ******************************** ... ..( 3 skipped). .. ******************************** 61 2025-06-22 23:02 51 ******************************** 62 2025-06-22 23:03 52 ********************************* 63 2025-06-22 23:04 51 ******************************** 64 2025-06-22 23:05 51 ******************************** 65 2025-06-22 23:06 49 ****************************** 66 2025-06-22 23:07 49 ****************************** 67 2025-06-22 23:08 49 ****************************** 68 2025-06-22 23:09 51 ******************************** 69 2025-06-22 23:10 53 ********************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET 0x8000 4 3494492 Vendor specific /dev/ada1 smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.2-RELEASE-p3 amd64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD1600AAJS-75M0A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.03E02 User Capacity: 160,000,000,000 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.5/5706 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sun Jun 22 23:10:24 2025 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 39) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 162 132 021 - 2883 4 Start_Stop_Count -O--CK 100 100 000 - 278 5 Reallocated_Sector_Ct PO--CK 195 195 140 - 40 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 100017 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 260 192 Power-Off_Retract_Count -O--CK 200 200 000 - 200 193 Load_Cycle_Count -O--CK 200 200 000 - 278 194 Temperature_Celsius -O---K 106 088 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 2 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 412 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 001 001 000 - 95149 241 Total_LBAs_Written -O--CK 200 200 000 - 90007575330 242 Total_LBAs_Read -O--CK 200 200 000 - 56588226536 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 13065 hours (544 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 a0 00 00:13:20.053 SMART WRITE LOG 35 00 00 01 00 00 05 c2 00 6b 60 e0 00 00:13:20.052 WRITE DMA EXT 35 00 00 01 00 00 05 c1 00 6b 60 e0 00 00:13:20.051 WRITE DMA EXT 35 00 00 01 00 00 05 c0 00 6b 60 e0 00 00:13:20.050 WRITE DMA EXT 35 00 00 01 00 00 05 bf 00 6b 60 e0 00 00:13:20.044 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 13064 hours (544 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 01 00 00 4f 00 c2 e0 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 a0 00 00:12:15.825 SMART WRITE LOG ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.825 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.825 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.823 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 e0 00 00:12:15.823 FLUSH CACHE EXT Error 1 [0] occurred at disk power-on lifetime: 13064 hours (544 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 01 00 0f 4f 00 c2 e0 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 a0 00 00:08:22.544 SMART WRITE LOG 25 00 00 00 80 00 09 74 00 77 60 e0 00 00:08:22.543 READ DMA EXT 25 00 00 01 00 00 09 73 00 77 60 e0 00 00:08:22.542 READ DMA EXT 25 00 00 01 00 00 09 72 00 77 60 e0 00 00:08:22.541 READ DMA EXT 25 00 00 01 00 00 09 71 00 77 60 e0 00 00:08:22.540 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 30471 - # 2 Short offline Completed without error 00% 18875 - # 3 Short offline Completed without error 00% 718 - # 4 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 35/40 Celsius Lifetime Min/Max Temperature: 37/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (449) Index Estimated Time Temperature Celsius 450 2025-06-22 15:13 39 ******************** ... ..( 46 skipped). .. ******************** 19 2025-06-22 16:00 39 ******************** 20 2025-06-22 16:01 38 ******************* 21 2025-06-22 16:02 39 ******************** ... ..( 16 skipped). .. ******************** 38 2025-06-22 16:19 39 ******************** 39 2025-06-22 16:20 38 ******************* 40 2025-06-22 16:21 38 ******************* 41 2025-06-22 16:22 39 ******************** ... ..( 9 skipped). .. ******************** 51 2025-06-22 16:32 39 ******************** 52 2025-06-22 16:33 38 ******************* 53 2025-06-22 16:34 39 ******************** ... ..( 15 skipped). .. ******************** 69 2025-06-22 16:50 39 ******************** 70 2025-06-22 16:51 38 ******************* 71 2025-06-22 16:52 38 ******************* 72 2025-06-22 16:53 39 ******************** ... ..( 38 skipped). .. ******************** 111 2025-06-22 17:32 39 ******************** 112 2025-06-22 17:33 38 ******************* 113 2025-06-22 17:34 38 ******************* 114 2025-06-22 17:35 39 ******************** ... ..( 29 skipped). .. ******************** 144 2025-06-22 18:05 39 ******************** 145 2025-06-22 18:06 38 ******************* ... ..( 5 skipped). .. ******************* 151 2025-06-22 18:12 38 ******************* 152 2025-06-22 18:13 39 ******************** 153 2025-06-22 18:14 39 ******************** 154 2025-06-22 18:15 39 ******************** 155 2025-06-22 18:16 38 ******************* ... ..( 11 skipped). .. ******************* 167 2025-06-22 18:28 38 ******************* 168 2025-06-22 18:29 39 ******************** 169 2025-06-22 18:30 38 ******************* 170 2025-06-22 18:31 39 ******************** ... ..( 5 skipped). .. ******************** 176 2025-06-22 18:37 39 ******************** 177 2025-06-22 18:38 38 ******************* 178 2025-06-22 18:39 38 ******************* 179 2025-06-22 18:40 38 ******************* 180 2025-06-22 18:41 39 ******************** ... ..( 15 skipped). .. ******************** 196 2025-06-22 18:57 39 ******************** 197 2025-06-22 18:58 38 ******************* 198 2025-06-22 18:59 39 ******************** 199 2025-06-22 19:00 38 ******************* ... ..( 4 skipped). .. ******************* 204 2025-06-22 19:05 38 ******************* 205 2025-06-22 19:06 37 ****************** 206 2025-06-22 19:07 38 ******************* 207 2025-06-22 19:08 38 ******************* 208 2025-06-22 19:09 38 ******************* 209 2025-06-22 19:10 37 ****************** ... ..( 10 skipped). .. ****************** 220 2025-06-22 19:21 37 ****************** 221 2025-06-22 19:22 39 ******************** ... ..( 2 skipped). .. ******************** 224 2025-06-22 19:25 39 ******************** 225 2025-06-22 19:26 38 ******************* 226 2025-06-22 19:27 39 ******************** ... ..( 15 skipped). .. ******************** 242 2025-06-22 19:43 39 ******************** 243 2025-06-22 19:44 38 ******************* 244 2025-06-22 19:45 38 ******************* 245 2025-06-22 19:46 38 ******************* 246 2025-06-22 19:47 39 ******************** ... ..(108 skipped). .. ******************** 355 2025-06-22 21:36 39 ******************** 356 2025-06-22 21:37 38 ******************* 357 2025-06-22 21:38 39 ******************** ... ..( 38 skipped). .. ******************** 396 2025-06-22 22:17 39 ******************** 397 2025-06-22 22:18 38 ******************* 398 2025-06-22 22:19 39 ******************** ... ..( 41 skipped). .. ******************** 440 2025-06-22 23:01 39 ******************** 441 2025-06-22 23:02 38 ******************* 442 2025-06-22 23:03 39 ******************** ... ..( 6 skipped). .. ******************** 449 2025-06-22 23:10 39 ******************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1344576 Vendor specific