/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Sep 13 00:15:42 2024 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 120) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 174 170 021 - 2300 4 Start_Stop_Count -O--CK 097 097 000 - 3171 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 084 084 000 - 11875 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2026 192 Power-Off_Retract_Count -O--CK 200 200 000 - 106 193 Load_Cycle_Count -O--CK 196 196 000 - 12344 194 Temperature_Celsius -O---K 109 102 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 27/36 Celsius Lifetime Min/Max Temperature: 19/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (209) Index Estimated Time Temperature Celsius 210 2024-09-12 16:18 35 **************** 211 2024-09-12 16:19 34 *************** 212 2024-09-12 16:20 35 **************** ... ..( 2 skipped). .. **************** 215 2024-09-12 16:23 35 **************** 216 2024-09-12 16:24 34 *************** ... ..( 14 skipped). .. *************** 231 2024-09-12 16:39 34 *************** 232 2024-09-12 16:40 36 ***************** ... ..( 27 skipped). .. ***************** 260 2024-09-12 17:08 36 ***************** 261 2024-09-12 17:09 35 **************** ... ..(334 skipped). .. **************** 118 2024-09-12 22:44 35 **************** 119 2024-09-12 22:45 34 *************** 120 2024-09-12 22:46 35 **************** ... ..( 21 skipped). .. **************** 142 2024-09-12 23:08 35 **************** 143 2024-09-12 23:09 34 *************** 144 2024-09-12 23:10 35 **************** ... ..( 6 skipped). .. **************** 151 2024-09-12 23:17 35 **************** 152 2024-09-12 23:18 34 *************** 153 2024-09-12 23:19 35 **************** ... ..( 5 skipped). .. **************** 159 2024-09-12 23:25 35 **************** 160 2024-09-12 23:26 34 *************** 161 2024-09-12 23:27 35 **************** 162 2024-09-12 23:28 35 **************** 163 2024-09-12 23:29 34 *************** ... ..( 17 skipped). .. *************** 181 2024-09-12 23:47 34 *************** 182 2024-09-12 23:48 35 **************** 183 2024-09-12 23:49 34 *************** 184 2024-09-12 23:50 35 **************** 185 2024-09-12 23:51 35 **************** 186 2024-09-12 23:52 34 *************** 187 2024-09-12 23:53 34 *************** 188 2024-09-12 23:54 35 **************** 189 2024-09-12 23:55 34 *************** ... ..( 2 skipped). .. *************** 192 2024-09-12 23:58 34 *************** 193 2024-09-12 23:59 35 **************** 194 2024-09-13 00:00 34 *************** 195 2024-09-13 00:01 34 *************** 196 2024-09-13 00:02 34 *************** 197 2024-09-13 00:03 35 **************** ... ..( 2 skipped). .. **************** 200 2024-09-13 00:06 35 **************** 201 2024-09-13 00:07 34 *************** 202 2024-09-13 00:08 35 **************** ... ..( 6 skipped). .. **************** 209 2024-09-13 00:15 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 35073 Vendor specific /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GR2OA350 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Sep 13 00:15:42 2024 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 120) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 230 100 033 - 1 4 Start_Stop_Count -O--CK 097 097 000 - 5655 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 058 058 000 - 18541 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 4714 183 Runtime_Bad_Block -O--CK 099 099 001 - 1 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 089 000 - 42973265966 188 Command_Timeout -O--CK 100 097 000 - 313539821760 190 Airflow_Temperature_Cel -O---K 071 054 045 - 29 (Min/Max 24/31) 191 G-Sense_Error_Rate -O--CK 091 091 000 - 2466 192 Power-Off_Retract_Count -O--CK 098 098 000 - 27591077 193 Load_Cycle_Count -O--CK 069 069 000 - 315102 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 3 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 44 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 44 [3] occurred at disk power-on lifetime: 18180 hours (757 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 00 08 20 00 00 Error: WP at LBA = 0x00000820 = 2080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 f0 00 00 13 0a 43 40 40 08 00:44:52.872 WRITE FPDMA QUEUED 61 05 40 00 e8 00 00 13 0a 3e 00 40 08 00:44:52.866 WRITE FPDMA QUEUED 61 05 40 00 e0 00 00 13 0a 38 c0 40 08 00:44:52.858 WRITE FPDMA QUEUED 61 05 40 00 d8 00 00 13 0a 33 80 40 08 00:44:52.852 WRITE FPDMA QUEUED 61 05 40 00 d0 00 00 13 0a 2e 40 40 08 00:44:52.844 WRITE FPDMA QUEUED Error 43 [2] occurred at disk power-on lifetime: 18180 hours (757 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 07 47 38 b0 07 00 Error: WP at LBA = 0x074738b0 = 122108080 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 00 00 00 12 a5 e2 e8 40 08 00:44:11.517 WRITE FPDMA QUEUED 61 05 40 00 f0 00 00 12 a5 dd a8 40 08 00:44:11.509 WRITE FPDMA QUEUED 61 05 40 00 e8 00 00 12 a5 d8 68 40 08 00:44:11.503 WRITE FPDMA QUEUED 61 05 40 00 e0 00 00 12 a5 d3 28 40 08 00:44:11.495 WRITE FPDMA QUEUED 61 05 40 00 d8 00 00 12 a5 cd e8 40 08 00:44:11.489 WRITE FPDMA QUEUED Error 42 [1] occurred at disk power-on lifetime: 18180 hours (757 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 07 47 38 58 07 00 Error: WP at LBA = 0x07473858 = 122107992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 c8 00 00 12 79 fd a8 40 08 00:43:54.082 WRITE FPDMA QUEUED 61 05 40 00 c0 00 00 12 79 f8 68 40 08 00:43:54.076 WRITE FPDMA QUEUED 61 05 40 00 b8 00 00 12 79 f3 28 40 08 00:43:54.068 WRITE FPDMA QUEUED 61 05 40 00 b0 00 00 12 79 ed e8 40 08 00:43:54.062 WRITE FPDMA QUEUED 61 05 40 00 a8 00 00 12 79 e8 a8 40 08 00:43:54.054 WRITE FPDMA QUEUED Error 41 [0] occurred at disk power-on lifetime: 18180 hours (757 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 68 00 00 07 47 38 50 07 00 Error: WP at LBA = 0x07473850 = 122107984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 40 00 00 12 55 53 80 40 08 00:43:40.095 WRITE FPDMA QUEUED 61 05 40 00 38 00 00 12 55 4e 40 40 08 00:43:40.087 WRITE FPDMA QUEUED 61 05 40 00 30 00 00 12 55 49 00 40 08 00:43:40.081 WRITE FPDMA QUEUED 61 05 40 00 28 00 00 12 55 43 c0 40 08 00:43:40.074 WRITE FPDMA QUEUED 61 05 40 00 20 00 00 12 55 3e 80 40 08 00:43:40.068 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17462 - # 2 Short offline Completed without error 00% 1185 - # 3 Short offline Completed without error 00% 1161 - # 4 Short offline Completed without error 00% 1144 - # 5 Short offline Completed without error 00% 1109 - # 6 Short offline Completed without error 00% 1097 - # 7 Short offline Completed without error 00% 1058 - # 8 Short offline Completed without error 00% 1046 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 24/31 Celsius Lifetime Min/Max Temperature: 13/46 Celsius Specified Max Operating Temperature: 30 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (58) Index Estimated Time Temperature Celsius 59 2024-09-12 22:08 29 ********** 60 2024-09-12 22:09 30 *********** 61 2024-09-12 22:10 29 ********** ... ..( 16 skipped). .. ********** 78 2024-09-12 22:27 29 ********** 79 2024-09-12 22:28 30 *********** 80 2024-09-12 22:29 30 *********** 81 2024-09-12 22:30 29 ********** ... ..( 8 skipped). .. ********** 90 2024-09-12 22:39 29 ********** 91 2024-09-12 22:40 30 *********** 92 2024-09-12 22:41 29 ********** ... ..( 14 skipped). .. ********** 107 2024-09-12 22:56 29 ********** 108 2024-09-12 22:57 30 *********** 109 2024-09-12 22:58 29 ********** ... ..( 4 skipped). .. ********** 114 2024-09-12 23:03 29 ********** 115 2024-09-12 23:04 30 *********** 116 2024-09-12 23:05 29 ********** ... ..( 6 skipped). .. ********** 123 2024-09-12 23:12 29 ********** 124 2024-09-12 23:13 30 *********** 125 2024-09-12 23:14 29 ********** 126 2024-09-12 23:15 30 *********** 127 2024-09-12 23:16 29 ********** 0 2024-09-12 23:17 29 ********** 1 2024-09-12 23:18 30 *********** 2 2024-09-12 23:19 29 ********** ... ..( 4 skipped). .. ********** 7 2024-09-12 23:24 29 ********** 8 2024-09-12 23:25 30 *********** 9 2024-09-12 23:26 29 ********** ... ..( 9 skipped). .. ********** 19 2024-09-12 23:36 29 ********** 20 2024-09-12 23:37 30 *********** 21 2024-09-12 23:38 29 ********** 22 2024-09-12 23:39 29 ********** 23 2024-09-12 23:40 30 *********** 24 2024-09-12 23:41 29 ********** ... ..( 21 skipped). .. ********** 46 2024-09-13 00:03 29 ********** 47 2024-09-13 00:04 30 *********** 48 2024-09-13 00:05 29 ********** 49 2024-09-13 00:06 30 *********** 50 2024-09-13 00:07 30 *********** 51 2024-09-13 00:08 29 ********** ... ..( 6 skipped). .. ********** 58 2024-09-13 00:15 29 ********** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada2 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..65GSX Device Model: TOSHIBA MK3265GSX Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: GJ002D User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Sep 13 00:15:43 2024 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 96) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 128 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 1177 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 1 9 Power_On_Hours -O--CK 089 089 000 - 287834 12 Power_Cycle_Count -O--CK 100 100 000 - 3040 191 G-Sense_Error_Rate -O--CK 100 100 000 - 2186 192 Power-Off_Retract_Count -O--CK 100 100 000 - 211 193 Load_Cycle_Count -O--CK 097 097 000 - 32217 194 Temperature_Celsius -O---K 100 100 000 - 29 (Min/Max 0/58) 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 39229903 200 Multi_Zone_Error_Rate -O--CK 100 100 000 - 141447469 240 Head_Flying_Hours -O--CK 093 093 000 - 185242 241 Total_LBAs_Written -O--CK 100 100 000 - 11295340727 242 Total_LBAs_Read -O--CK 100 100 000 - 16487746333 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 57 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 57 [56] occurred at disk power-on lifetime: 3815 hours (158 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 19 47 b6 3f e9 00 Error: UNC 1 sectors at LBA = 0x1947b63f = 424130111 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3f 00 00 19 47 b6 01 e0 00 00:09:36.611 READ DMA EXT 25 00 00 00 01 00 00 19 47 b6 00 e0 00 00:09:36.611 READ DMA EXT 25 00 00 00 3e 00 00 19 47 b5 c2 e0 00 00:09:36.611 READ DMA EXT 25 00 00 00 02 00 00 19 47 b5 c0 e0 00 00:09:36.611 READ DMA EXT 25 00 00 00 3d 00 00 19 47 b5 83 e0 00 00:09:36.610 READ DMA EXT Error 56 [55] occurred at disk power-on lifetime: 3815 hours (158 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 19 47 b6 3f e9 00 Error: UNC 1 sectors at LBA = 0x1947b63f = 424130111 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3f 00 00 19 47 b6 01 e0 00 00:00:07.758 READ DMA EXT 25 00 00 00 01 00 00 19 47 b6 00 e0 00 00:00:07.758 READ DMA EXT 25 00 00 00 3e 00 00 19 47 b5 c2 e0 00 00:00:07.758 READ DMA EXT 25 00 00 00 02 00 00 19 47 b5 c0 e0 00 00:00:07.758 READ DMA EXT 25 00 00 00 3d 00 00 19 47 b5 83 e0 00 00:00:07.757 READ DMA EXT Error 55 [54] occurred at disk power-on lifetime: 3815 hours (158 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 19 47 b6 3f e9 00 Error: UNC 1 sectors at LBA = 0x1947b63f = 424130111 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3f 00 00 19 47 b6 01 e0 00 00:14:34.421 READ DMA EXT 25 00 00 00 01 00 00 19 47 b6 00 e0 00 00:14:34.421 READ DMA EXT 25 00 00 00 3e 00 00 19 47 b5 c2 e0 00 00:14:34.421 READ DMA EXT 25 00 00 00 02 00 00 19 47 b5 c0 e0 00 00:14:34.420 READ DMA EXT 25 00 00 00 3d 00 00 19 47 b5 83 e0 00 00:14:34.420 READ DMA EXT Error 54 [53] occurred at disk power-on lifetime: 862 hours (35 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 d2 00 00 02 11 d8 89 62 00 Error: UNC at LBA = 0x0211d889 = 34723977 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 00 04 74 52 78 40 00 00:09:30.967 READ FPDMA QUEUED 60 00 08 00 a0 00 00 02 35 75 60 40 00 00:09:30.951 READ FPDMA QUEUED 61 00 20 00 98 00 00 13 b3 1e 60 40 00 00:09:30.950 WRITE FPDMA QUEUED 60 00 20 00 90 00 00 01 d9 16 80 40 00 00:09:30.949 READ FPDMA QUEUED 61 01 00 00 88 00 00 13 b6 13 20 40 00 00:09:30.946 WRITE FPDMA QUEUED Error 53 [52] occurred at disk power-on lifetime: 862 hours (35 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 b2 00 00 02 11 d8 89 62 00 Error: WP at LBA = 0x0211d889 = 34723977 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 58 00 00 13 b6 12 20 40 00 00:09:26.818 WRITE FPDMA QUEUED 61 01 00 00 d8 00 00 13 b6 11 20 40 00 00:09:26.786 WRITE FPDMA QUEUED 60 01 00 00 50 00 00 02 38 08 38 40 00 00:09:26.765 READ FPDMA QUEUED 61 01 00 00 48 00 00 13 b6 0c 20 40 00 00:09:26.765 WRITE FPDMA QUEUED 61 01 00 00 40 00 00 13 b6 0d 20 40 00 00:09:26.765 WRITE FPDMA QUEUED Error 52 [51] occurred at disk power-on lifetime: 862 hours (35 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a2 00 00 02 11 d8 89 62 00 Error: WP at LBA = 0x0211d889 = 34723977 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 20 00 78 00 00 13 b6 14 20 40 00 00:09:22.639 WRITE FPDMA QUEUED 60 00 18 00 30 00 00 14 07 1e 6a 40 00 00:09:22.621 READ FPDMA QUEUED 60 01 00 00 38 00 00 15 b1 04 10 40 00 00:09:22.620 READ FPDMA QUEUED 60 01 00 00 40 00 00 15 b1 03 10 40 00 00:09:22.618 READ FPDMA QUEUED 60 01 00 00 48 00 00 15 b1 02 10 40 00 00:09:22.609 READ FPDMA QUEUED Error 51 [50] occurred at disk power-on lifetime: 862 hours (35 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 5a 00 00 02 11 d8 89 62 00 Error: UNC at LBA = 0x0211d889 = 34723977 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 68 00 00 02 38 08 00 40 00 00:09:18.518 READ FPDMA QUEUED 61 00 20 00 60 00 00 13 b3 1e 60 40 00 00:09:18.496 WRITE FPDMA QUEUED 60 00 20 00 58 00 00 02 11 d8 80 40 00 00:09:18.463 READ FPDMA QUEUED 60 01 00 00 50 00 00 15 b0 ef 10 40 00 00:09:18.463 READ FPDMA QUEUED 60 01 00 00 48 00 00 15 b0 eb 10 40 00 00:09:18.463 READ FPDMA QUEUED Error 50 [49] occurred at disk power-on lifetime: 862 hours (35 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 92 00 00 02 11 d8 89 62 00 Error: UNC at LBA = 0x0211d889 = 34723977 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 68 00 00 04 74 48 f8 40 00 00:09:14.306 READ FPDMA QUEUED 61 00 08 00 60 00 00 13 b6 0c 00 40 00 00:09:14.295 WRITE FPDMA QUEUED 61 01 00 00 50 00 00 03 25 c9 c0 40 00 00:09:14.294 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 03 25 c8 c0 40 00 00:09:14.294 WRITE FPDMA QUEUED 61 01 00 00 40 00 00 03 25 c7 c0 40 00 00:09:14.293 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3863 - # 2 Short offline Completed without error 00% 2284 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 26/30 Celsius Lifetime Min/Max Temperature: 0/58 Celsius Specified Max Operating Temperature: 38 Celsius Under/Over Temperature Limit Count: 20/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 15/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 478 (227) Index Estimated Time Temperature Celsius 228 2024-09-09 16:40 30 *********** ... ..( 11 skipped). .. *********** 240 2024-09-09 18:40 30 *********** 241 2024-09-09 18:50 31 ************ 242 2024-09-09 19:00 30 *********** ... ..( 42 skipped). .. *********** 285 2024-09-10 02:10 30 *********** 286 2024-09-10 02:20 29 ********** ... ..( 2 skipped). .. ********** 289 2024-09-10 02:50 29 ********** 290 2024-09-10 03:00 30 *********** 291 2024-09-10 03:10 ? - 292 2024-09-10 03:20 29 ********** 293 2024-09-10 03:30 30 *********** ... ..( 16 skipped). .. *********** 310 2024-09-10 06:20 30 *********** 311 2024-09-10 06:30 31 ************ 312 2024-09-10 06:40 30 *********** 313 2024-09-10 06:50 31 ************ ... ..( 10 skipped). .. ************ 324 2024-09-10 08:40 31 ************ 325 2024-09-10 08:50 30 *********** 326 2024-09-10 09:00 30 *********** 327 2024-09-10 09:10 31 ************ 328 2024-09-10 09:20 31 ************ 329 2024-09-10 09:30 31 ************ 330 2024-09-10 09:40 30 *********** ... ..( 20 skipped). .. *********** 351 2024-09-10 13:10 30 *********** 352 2024-09-10 13:20 29 ********** 353 2024-09-10 13:30 32 ************* 354 2024-09-10 13:40 33 ************** 355 2024-09-10 13:50 33 ************** 356 2024-09-10 14:00 31 ************ 357 2024-09-10 14:10 29 ********** 358 2024-09-10 14:20 30 *********** 359 2024-09-10 14:30 29 ********** 360 2024-09-10 14:40 29 ********** 361 2024-09-10 14:50 30 *********** 362 2024-09-10 15:00 29 ********** 363 2024-09-10 15:10 29 ********** 364 2024-09-10 15:20 29 ********** 365 2024-09-10 15:30 ? - 366 2024-09-10 15:40 28 ********* 367 2024-09-10 15:50 ? - 368 2024-09-10 16:00 29 ********** 369 2024-09-10 16:10 30 *********** 370 2024-09-10 16:20 30 *********** 371 2024-09-10 16:30 33 ************** 372 2024-09-10 16:40 31 ************ 373 2024-09-10 16:50 30 *********** ... ..( 16 skipped). .. *********** 390 2024-09-10 19:40 30 *********** 391 2024-09-10 19:50 33 ************** 392 2024-09-10 20:00 31 ************ 393 2024-09-10 20:10 30 *********** 394 2024-09-10 20:20 31 ************ 395 2024-09-10 20:30 31 ************ 396 2024-09-10 20:40 30 *********** ... ..( 21 skipped). .. *********** 418 2024-09-11 00:20 30 *********** 419 2024-09-11 00:30 ? - 420 2024-09-11 00:40 29 ********** 421 2024-09-11 00:50 29 ********** 422 2024-09-11 01:00 30 *********** 423 2024-09-11 01:10 30 *********** 424 2024-09-11 01:20 29 ********** 425 2024-09-11 01:30 30 *********** 426 2024-09-11 01:40 29 ********** 427 2024-09-11 01:50 29 ********** 428 2024-09-11 02:00 30 *********** 429 2024-09-11 02:10 29 ********** ... ..( 4 skipped). .. ********** 434 2024-09-11 03:00 29 ********** 435 2024-09-11 03:10 30 *********** 436 2024-09-11 03:20 29 ********** 437 2024-09-11 03:30 32 ************* 438 2024-09-11 03:40 30 *********** 439 2024-09-11 03:50 29 ********** ... ..( 43 skipped). .. ********** 5 2024-09-11 11:10 29 ********** 6 2024-09-11 11:20 30 *********** 7 2024-09-11 11:30 30 *********** 8 2024-09-11 11:40 29 ********** 9 2024-09-11 11:50 30 *********** ... ..( 7 skipped). .. *********** 17 2024-09-11 13:10 30 *********** 18 2024-09-11 13:20 ? - 19 2024-09-11 13:30 27 ******** 20 2024-09-11 13:40 28 ********* 21 2024-09-11 13:50 28 ********* 22 2024-09-11 14:00 28 ********* 23 2024-09-11 14:10 27 ******** 24 2024-09-11 14:20 28 ********* 25 2024-09-11 14:30 ? - 26 2024-09-11 14:40 28 ********* 27 2024-09-11 14:50 29 ********** ... ..( 8 skipped). .. ********** 36 2024-09-11 16:20 29 ********** 37 2024-09-11 16:30 28 ********* 38 2024-09-11 16:40 29 ********** 39 2024-09-11 16:50 29 ********** 40 2024-09-11 17:00 28 ********* 41 2024-09-11 17:10 29 ********** ... ..( 2 skipped). .. ********** 44 2024-09-11 17:40 29 ********** 45 2024-09-11 17:50 28 ********* 46 2024-09-11 18:00 29 ********** 47 2024-09-11 18:10 29 ********** 48 2024-09-11 18:20 28 ********* 49 2024-09-11 18:30 28 ********* 50 2024-09-11 18:40 29 ********** ... ..( 7 skipped). .. ********** 58 2024-09-11 20:00 29 ********** 59 2024-09-11 20:10 ? - 60 2024-09-11 20:20 ? - 61 2024-09-11 20:30 29 ********** ... ..( 2 skipped). .. ********** 64 2024-09-11 21:00 29 ********** 65 2024-09-11 21:10 30 *********** 66 2024-09-11 21:20 30 *********** 67 2024-09-11 21:30 30 *********** 68 2024-09-11 21:40 29 ********** 69 2024-09-11 21:50 30 *********** 70 2024-09-11 22:00 30 *********** 71 2024-09-11 22:10 30 *********** 72 2024-09-11 22:20 29 ********** ... ..( 2 skipped). .. ********** 75 2024-09-11 22:50 29 ********** 76 2024-09-11 23:00 30 *********** 77 2024-09-11 23:10 29 ********** ... ..( 2 skipped). .. ********** 80 2024-09-11 23:40 29 ********** 81 2024-09-11 23:50 ? - 82 2024-09-12 00:00 ? - 83 2024-09-12 00:10 29 ********** 84 2024-09-12 00:20 29 ********** 85 2024-09-12 00:30 30 *********** ... ..( 14 skipped). .. *********** 100 2024-09-12 03:00 30 *********** 101 2024-09-12 03:10 31 ************ 102 2024-09-12 03:20 30 *********** ... ..( 9 skipped). .. *********** 112 2024-09-12 05:00 30 *********** 113 2024-09-12 05:10 29 ********** 114 2024-09-12 05:20 30 *********** ... ..( 3 skipped). .. *********** 118 2024-09-12 06:00 30 *********** 119 2024-09-12 06:10 29 ********** 120 2024-09-12 06:20 30 *********** 121 2024-09-12 06:30 29 ********** 122 2024-09-12 06:40 30 *********** 123 2024-09-12 06:50 29 ********** 124 2024-09-12 07:00 30 *********** ... ..( 8 skipped). .. *********** 133 2024-09-12 08:30 30 *********** 134 2024-09-12 08:40 29 ********** 135 2024-09-12 08:50 30 *********** 136 2024-09-12 09:00 29 ********** ... ..( 8 skipped). .. ********** 145 2024-09-12 10:30 29 ********** 146 2024-09-12 10:40 28 ********* 147 2024-09-12 10:50 29 ********** ... ..( 20 skipped). .. ********** 168 2024-09-12 14:20 29 ********** 169 2024-09-12 14:30 ? - 170 2024-09-12 14:40 29 ********** 171 2024-09-12 14:50 30 *********** ... ..( 19 skipped). .. *********** 191 2024-09-12 18:10 30 *********** 192 2024-09-12 18:20 29 ********** 193 2024-09-12 18:30 30 *********** 194 2024-09-12 18:40 30 *********** 195 2024-09-12 18:50 29 ********** 196 2024-09-12 19:00 29 ********** 197 2024-09-12 19:10 30 *********** 198 2024-09-12 19:20 30 *********** 199 2024-09-12 19:30 29 ********** 200 2024-09-12 19:40 29 ********** 201 2024-09-12 19:50 30 *********** 202 2024-09-12 20:00 29 ********** ... ..( 24 skipped). .. ********** 227 2024-09-13 00:10 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/nda0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: /dev/nda0 failed: INQUIRY failed