/dev/sd0 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven OEM SSDs Device Model: SATA SSD Serial Number: -- Firmware Version: S9FM02.1 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: MicroSSD TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 2 08:50:10 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 6418 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 110 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 32 170 Bad_Blk_Ct_Lat/Erl 0x0013 100 100 010 Pre-fail Always - 0/25 173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 448 (Average 6842) 192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 1 194 Temperature_Celsius 0x0023 070 070 000 Pre-fail Always - 30 196 Not_In_Use 0x0000 100 100 000 Old_age Offline - 16 218 CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 231 SSD_Life_Left 0x0013 100 100 000 Pre-fail Always - 85 233 Flash_Writes_GiB 0x0013 100 100 000 Pre-fail Always - 17905859 241 Lifetime_Writes_GiB 0x0012 100 100 000 Old_age Always - 6828009 242 Lifetime_Reads_GiB 0x0012 100 100 000 Old_age Always - 2287458 246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 7498318 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more /dev/sd1 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: OPENBSD Product: SR CRYPTO Revision: 006 User Capacity: 63,750,307,328 bytes [63.7 GB] Logical block size: 512 bytes >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.