Probe #aeb42f8919 of Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p12-HBSD amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD5000LPVX-22V0TT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jan 23 15:18:06 2021 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8700) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 101) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 154 148 021 - 1283 4 Start_Stop_Count -O--CK 001 001 000 - 120460 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 079 078 000 - 15873 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 35 191 G-Sense_Error_Rate -O--CK 092 092 000 - 8 192 Power-Off_Retract_Count -O--CK 200 200 000 - 18 193 Load_Cycle_Count -O--CK 001 001 000 - 3306954 194 Temperature_Celsius -O---K 101 085 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 36/52 Celsius Lifetime Min/Max Temperature: 0/58 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2021-01-23 13:11 42 *********************** ... ..( 4 skipped). .. *********************** 90 2021-01-23 13:16 42 *********************** 91 2021-01-23 13:17 ? - 92 2021-01-23 13:18 42 *********************** 93 2021-01-23 13:19 42 *********************** 94 2021-01-23 13:20 ? - 95 2021-01-23 13:21 42 *********************** ... ..( 31 skipped). .. *********************** 127 2021-01-23 13:53 42 *********************** 0 2021-01-23 13:54 ? - 1 2021-01-23 13:55 42 *********************** 2 2021-01-23 13:56 42 *********************** 3 2021-01-23 13:57 ? - 4 2021-01-23 13:58 42 *********************** 5 2021-01-23 13:59 ? - 6 2021-01-23 14:00 42 *********************** 7 2021-01-23 14:01 42 *********************** 8 2021-01-23 14:02 ? - 9 2021-01-23 14:03 42 *********************** ... ..( 9 skipped). .. *********************** 19 2021-01-23 14:13 42 *********************** 20 2021-01-23 14:14 ? - 21 2021-01-23 14:15 42 *********************** ... ..( 4 skipped). .. *********************** 26 2021-01-23 14:20 42 *********************** 27 2021-01-23 14:21 ? - 28 2021-01-23 14:22 42 *********************** ... ..( 5 skipped). .. *********************** 34 2021-01-23 14:28 42 *********************** 35 2021-01-23 14:29 ? - 36 2021-01-23 14:30 42 *********************** ... ..( 3 skipped). .. *********************** 40 2021-01-23 14:34 42 *********************** 41 2021-01-23 14:35 ? - 42 2021-01-23 14:36 42 *********************** ... ..( 7 skipped). .. *********************** 50 2021-01-23 14:44 42 *********************** 51 2021-01-23 14:45 43 ************************ 52 2021-01-23 14:46 43 ************************ 53 2021-01-23 14:47 44 ************************* 54 2021-01-23 14:48 45 ************************** 55 2021-01-23 14:49 45 ************************** 56 2021-01-23 14:50 45 ************************** 57 2021-01-23 14:51 46 *************************** 58 2021-01-23 14:52 46 *************************** 59 2021-01-23 14:53 45 ************************** 60 2021-01-23 14:54 45 ************************** 61 2021-01-23 14:55 44 ************************* ... ..( 3 skipped). .. ************************* 65 2021-01-23 14:59 44 ************************* 66 2021-01-23 15:00 43 ************************ ... ..( 11 skipped). .. ************************ 78 2021-01-23 15:12 43 ************************ 79 2021-01-23 15:13 42 *********************** ... ..( 4 skipped). .. *********************** 84 2021-01-23 15:18 42 *********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 29 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 30 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 15673458 Vendor specific


Hardware for Linux and BSD

GitHub