/dev/sd0 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Acer SSD SA100 960GB Serial Number: -- Firmware Version: U0401A0 User Capacity: 960,197,124,096 bytes [960 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Aug 20 17:30:09 2024 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 1244 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 409 160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 12 164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 136 165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 29 166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 7 167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 24 168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050 169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 142 194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 36 195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 644 232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 157628 242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 39908 245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 102708 SMART Error Log Version: 1 ATA Error Count: 644 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 642 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 01 00 00 00 00 08 00:00:00.000 IDENTIFY DEVICE b0 d0 01 00 4f c2 00 08 00:00:00.000 SMART READ DATA b0 d1 01 01 4f c2 00 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG Error 641 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 48 30 18 b9 64 40 08 00:00:00.000 WRITE FPDMA QUEUED b0 d5 01 01 4f c2 00 08 00:00:00.000 SMART READ LOG b0 d5 01 00 4f c2 00 08 00:00:00.000 SMART READ LOG ea 00 00 00 00 00 a0 08 00:00:00.000 FLUSH CACHE EXT b0 da 00 00 4f c2 00 08 00:00:00.000 SMART RETURN STATUS Error 640 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 20 d0 70 eb 1c 40 00 00:00:00.000 WRITE FPDMA QUEUED 61 20 70 70 eb 1c 40 00 00:00:00.000 WRITE FPDMA QUEUED 61 20 90 70 eb 1c 40 00 00:00:00.000 WRITE FPDMA QUEUED ec 00 01 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE ec 00 01 00 00 00 00 00 00:00:00.000 IDENTIFY DEVICE SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported The above only provides legacy SMART information - try 'smartctl -x' for more /dev/sd1 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37480G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: SAJ20104 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 20 17:30:09 2024 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 100 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5195 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1037 148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0 168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 12 169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 0 170 Bad_Blk_Ct_Lat/Erl 0x0000 100 100 010 Old_age Offline - 0/0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 0 181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 466 194 Temperature_Celsius 0x0022 036 050 000 Old_age Always - 36 (Min/Max 16/50) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 12 231 SSD_Life_Left 0x0000 091 091 000 Old_age Offline - 91 233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 16140 241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 11068 242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 4276 244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 97 245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 157 246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 150456 SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 2 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d0 01 00 4f c2 00 00 00:00:00.000 SMART READ DATA b0 d1 01 01 4f c2 00 00 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 da 00 00 4f c2 00 00 00:00:00.000 SMART RETURN STATUS b0 d5 01 00 4f c2 00 00 00:00:00.000 SMART READ LOG b0 d5 01 01 4f c2 00 00 00:00:00.000 SMART READ LOG SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported The above only provides legacy SMART information - try 'smartctl -x' for more /dev/sd2 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org Smartctl open device: /dev/sd2c failed: No medium found /dev/sd3 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: OPENBSD Product: SR CRYPTO Revision: 006 User Capacity: 959,924,174,336 bytes [959 GB] Logical block size: 512 bytes >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.