Probe #a90b68e57b of ASUSTek ROG CROSSHAIR VIII H... Desktop Computer

Log: smartctl

/dev/ada0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 QVO 2TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVQ02B6Q User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 23 01:00:06 2022 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1539 12 Power_Cycle_Count -O--CK 099 099 000 - 19 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 052 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 6 241 Total_LBAs_Written -O--CK 099 099 000 - 3437373886 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 649 - # 2 Short offline Completed without error 00% 479 - # 3 Short offline Completed without error 00% 211 - # 4 Extended offline Completed without error 00% 206 - # 5 Extended offline Completed without error 00% 129 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 25/47 Celsius Lifetime Min/Max Temperature: 25/48 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2022-01-22 03:50 32 ************* ... ..( 4 skipped). .. ************* 55 2022-01-22 04:40 32 ************* 56 2022-01-22 04:50 31 ************ 57 2022-01-22 05:00 32 ************* ... ..( 4 skipped). .. ************* 62 2022-01-22 05:50 32 ************* 63 2022-01-22 06:00 31 ************ 64 2022-01-22 06:10 32 ************* 65 2022-01-22 06:20 31 ************ 66 2022-01-22 06:30 31 ************ 67 2022-01-22 06:40 32 ************* 68 2022-01-22 06:50 31 ************ 69 2022-01-22 07:00 32 ************* ... ..( 6 skipped). .. ************* 76 2022-01-22 08:10 32 ************* 77 2022-01-22 08:20 31 ************ ... ..( 9 skipped). .. ************ 87 2022-01-22 10:00 31 ************ 88 2022-01-22 10:10 32 ************* 89 2022-01-22 10:20 32 ************* 90 2022-01-22 10:30 32 ************* 91 2022-01-22 10:40 31 ************ 92 2022-01-22 10:50 32 ************* 93 2022-01-22 11:00 32 ************* 94 2022-01-22 11:10 31 ************ 95 2022-01-22 11:20 31 ************ 96 2022-01-22 11:30 31 ************ 97 2022-01-22 11:40 32 ************* ... ..( 24 skipped). .. ************* 122 2022-01-22 15:50 32 ************* 123 2022-01-22 16:00 33 ************** 124 2022-01-22 16:10 32 ************* 125 2022-01-22 16:20 32 ************* 126 2022-01-22 16:30 31 ************ ... ..( 5 skipped). .. ************ 4 2022-01-22 17:30 31 ************ 5 2022-01-22 17:40 32 ************* 6 2022-01-22 17:50 31 ************ ... ..( 9 skipped). .. ************ 16 2022-01-22 19:30 31 ************ 17 2022-01-22 19:40 30 *********** 18 2022-01-22 19:50 30 *********** 19 2022-01-22 20:00 31 ************ 20 2022-01-22 20:10 31 ************ 21 2022-01-22 20:20 30 *********** ... ..( 11 skipped). .. *********** 33 2022-01-22 22:20 30 *********** 34 2022-01-22 22:30 31 ************ 35 2022-01-22 22:40 31 ************ 36 2022-01-22 22:50 31 ************ 37 2022-01-22 23:00 32 ************* ... ..( 3 skipped). .. ************* 41 2022-01-22 23:40 32 ************* 42 2022-01-22 23:50 31 ************ 43 2022-01-23 00:00 31 ************ 44 2022-01-23 00:10 31 ************ 45 2022-01-23 00:20 32 ************* 46 2022-01-23 00:30 32 ************* 47 2022-01-23 00:40 31 ************ 48 2022-01-23 00:50 31 ************ 49 2022-01-23 01:00 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 19 --- Lifetime Power-On Resets 0x01 0x010 4 1539 --- Power-on Hours 0x01 0x018 6 3437373886 --- Logical Sectors Written 0x01 0x020 6 50940577 --- Number of Write Commands 0x01 0x028 6 1363662170 --- Logical Sectors Read 0x01 0x030 6 16324509 --- Number of Read Commands 0x01 0x038 6 1710000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 48 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 196 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada1 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 QVO 2TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVQ02B6Q User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 23 01:00:06 2022 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1539 12 Power_Cycle_Count -O--CK 099 099 000 - 19 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 050 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 6 241 Total_LBAs_Written -O--CK 099 099 000 - 3437210948 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 649 - # 2 Short offline Completed without error 00% 480 - # 3 Short offline Completed without error 00% 211 - # 4 Extended offline Completed without error 00% 209 - # 5 Extended offline Completed without error 00% 132 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 25/46 Celsius Lifetime Min/Max Temperature: 25/49 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (48) Index Estimated Time Temperature Celsius 49 2022-01-22 03:50 32 ************* ... ..( 3 skipped). .. ************* 53 2022-01-22 04:30 32 ************* 54 2022-01-22 04:40 31 ************ 55 2022-01-22 04:50 32 ************* 56 2022-01-22 05:00 32 ************* 57 2022-01-22 05:10 31 ************ 58 2022-01-22 05:20 31 ************ 59 2022-01-22 05:30 31 ************ 60 2022-01-22 05:40 32 ************* 61 2022-01-22 05:50 31 ************ 62 2022-01-22 06:00 32 ************* 63 2022-01-22 06:10 31 ************ 64 2022-01-22 06:20 31 ************ 65 2022-01-22 06:30 32 ************* 66 2022-01-22 06:40 31 ************ 67 2022-01-22 06:50 32 ************* ... ..( 6 skipped). .. ************* 74 2022-01-22 08:00 32 ************* 75 2022-01-22 08:10 31 ************ ... ..( 9 skipped). .. ************ 85 2022-01-22 09:50 31 ************ 86 2022-01-22 10:00 32 ************* 87 2022-01-22 10:10 31 ************ 88 2022-01-22 10:20 32 ************* 89 2022-01-22 10:30 31 ************ 90 2022-01-22 10:40 31 ************ 91 2022-01-22 10:50 32 ************* 92 2022-01-22 11:00 31 ************ 93 2022-01-22 11:10 31 ************ 94 2022-01-22 11:20 31 ************ 95 2022-01-22 11:30 32 ************* 96 2022-01-22 11:40 32 ************* 97 2022-01-22 11:50 33 ************** 98 2022-01-22 12:00 32 ************* ... ..( 21 skipped). .. ************* 120 2022-01-22 15:40 32 ************* 121 2022-01-22 15:50 33 ************** 122 2022-01-22 16:00 32 ************* 123 2022-01-22 16:10 32 ************* 124 2022-01-22 16:20 31 ************ ... ..( 5 skipped). .. ************ 2 2022-01-22 17:20 31 ************ 3 2022-01-22 17:30 32 ************* 4 2022-01-22 17:40 31 ************ ... ..( 9 skipped). .. ************ 14 2022-01-22 19:20 31 ************ 15 2022-01-22 19:30 30 *********** 16 2022-01-22 19:40 30 *********** 17 2022-01-22 19:50 31 ************ 18 2022-01-22 20:00 31 ************ 19 2022-01-22 20:10 30 *********** ... ..( 2 skipped). .. *********** 22 2022-01-22 20:40 30 *********** 23 2022-01-22 20:50 31 ************ 24 2022-01-22 21:00 30 *********** ... ..( 6 skipped). .. *********** 31 2022-01-22 22:10 30 *********** 32 2022-01-22 22:20 31 ************ 33 2022-01-22 22:30 31 ************ 34 2022-01-22 22:40 31 ************ 35 2022-01-22 22:50 32 ************* ... ..( 3 skipped). .. ************* 39 2022-01-22 23:30 32 ************* 40 2022-01-22 23:40 31 ************ ... ..( 4 skipped). .. ************ 45 2022-01-23 00:30 31 ************ 46 2022-01-23 00:40 32 ************* 47 2022-01-23 00:50 32 ************* 48 2022-01-23 01:00 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 19 --- Lifetime Power-On Resets 0x01 0x010 4 1539 --- Power-on Hours 0x01 0x018 6 3437210948 --- Logical Sectors Written 0x01 0x020 6 50987841 --- Number of Write Commands 0x01 0x028 6 1365253460 --- Logical Sectors Read 0x01 0x030 6 16325565 --- Number of Read Commands 0x01 0x038 6 1136000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 196 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada2 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 QVO 2TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVQ02B6Q User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 23 01:00:06 2022 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1538 12 Power_Cycle_Count -O--CK 099 099 000 - 19 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 069 051 000 - 31 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 6 241 Total_LBAs_Written -O--CK 099 099 000 - 3437085812 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 649 - # 2 Short offline Completed without error 00% 479 - # 3 Extended offline Completed without error 00% 211 - # 4 Extended offline Completed without error 00% 134 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 24/49 Celsius Lifetime Min/Max Temperature: 24/49 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2022-01-22 03:50 31 ************ 51 2022-01-22 04:00 31 ************ 52 2022-01-22 04:10 32 ************* 53 2022-01-22 04:20 31 ************ ... ..( 10 skipped). .. ************ 64 2022-01-22 06:10 31 ************ 65 2022-01-22 06:20 30 *********** 66 2022-01-22 06:30 31 ************ 67 2022-01-22 06:40 31 ************ 68 2022-01-22 06:50 30 *********** 69 2022-01-22 07:00 31 ************ ... ..( 6 skipped). .. ************ 76 2022-01-22 08:10 31 ************ 77 2022-01-22 08:20 30 *********** 78 2022-01-22 08:30 30 *********** 79 2022-01-22 08:40 30 *********** 80 2022-01-22 08:50 31 ************ 81 2022-01-22 09:00 30 *********** ... ..( 5 skipped). .. *********** 87 2022-01-22 10:00 30 *********** 88 2022-01-22 10:10 31 ************ ... ..( 2 skipped). .. ************ 91 2022-01-22 10:40 31 ************ 92 2022-01-22 10:50 30 *********** 93 2022-01-22 11:00 31 ************ 94 2022-01-22 11:10 30 *********** 95 2022-01-22 11:20 30 *********** 96 2022-01-22 11:30 30 *********** 97 2022-01-22 11:40 31 ************ ... ..( 19 skipped). .. ************ 117 2022-01-22 15:00 31 ************ 118 2022-01-22 15:10 32 ************* 119 2022-01-22 15:20 31 ************ ... ..( 2 skipped). .. ************ 122 2022-01-22 15:50 31 ************ 123 2022-01-22 16:00 32 ************* 124 2022-01-22 16:10 31 ************ 125 2022-01-22 16:20 31 ************ 126 2022-01-22 16:30 31 ************ 127 2022-01-22 16:40 30 *********** ... ..( 4 skipped). .. *********** 4 2022-01-22 17:30 30 *********** 5 2022-01-22 17:40 31 ************ 6 2022-01-22 17:50 30 *********** ... ..( 10 skipped). .. *********** 17 2022-01-22 19:40 30 *********** 18 2022-01-22 19:50 29 ********** 19 2022-01-22 20:00 30 *********** 20 2022-01-22 20:10 30 *********** 21 2022-01-22 20:20 29 ********** ... ..( 11 skipped). .. ********** 33 2022-01-22 22:20 29 ********** 34 2022-01-22 22:30 30 *********** 35 2022-01-22 22:40 30 *********** 36 2022-01-22 22:50 30 *********** 37 2022-01-22 23:00 31 ************ ... ..( 3 skipped). .. ************ 41 2022-01-22 23:40 31 ************ 42 2022-01-22 23:50 30 *********** 43 2022-01-23 00:00 30 *********** 44 2022-01-23 00:10 30 *********** 45 2022-01-23 00:20 31 ************ 46 2022-01-23 00:30 30 *********** 47 2022-01-23 00:40 30 *********** 48 2022-01-23 00:50 30 *********** 49 2022-01-23 01:00 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 19 --- Lifetime Power-On Resets 0x01 0x010 4 1538 --- Power-on Hours 0x01 0x018 6 3437085812 --- Logical Sectors Written 0x01 0x020 6 51194243 --- Number of Write Commands 0x01 0x028 6 1368492532 --- Logical Sectors Read 0x01 0x030 6 16343638 --- Number of Read Commands 0x01 0x038 6 3519000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 196 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/da0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD20NMVW-11AV3S2 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 2,000,365,380,096 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 23 01:00:06 2022 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (38760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 427) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 209 201 021 - 4508 4 Start_Stop_Count -O--CK 099 099 000 - 1039 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4869 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 31 192 Power-Off_Retract_Count -O--CK 200 200 000 - 33 193 Load_Cycle_Count -O--CK 199 199 000 - 3472 194 Temperature_Celsius -O---K 126 099 000 - 26 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xcf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3980 - # 2 Extended offline Completed without error 00% 3588 - # 3 Short offline Completed without error 00% 3206 - # 4 Short offline Completed without error 00% 3058 - # 5 Short offline Completed without error 00% 2893 - # 6 Short offline Completed without error 00% 2725 - # 7 Short offline Completed without error 00% 2557 - # 8 Short offline Completed without error 00% 2443 - # 9 Short offline Completed without error 00% 2275 - #10 Extended offline Completed without error 00% 2173 - #11 Short offline Completed without error 00% 2107 - #12 Short offline Completed without error 00% 1955 - #13 Short offline Completed without error 00% 1787 - #14 Short offline Completed without error 00% 1619 - #15 Short offline Completed without error 00% 1451 - #16 Extended offline Completed without error 00% 1438 - #17 Short offline Completed without error 00% 1283 - #18 Short offline Completed without error 00% 1115 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 20/36 Celsius Lifetime Min/Max Temperature: 11/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (118) Index Estimated Time Temperature Celsius 119 2022-01-22 22:53 25 ****** ... ..( 48 skipped). .. ****** 40 2022-01-22 23:42 25 ****** 41 2022-01-22 23:43 ? - 42 2022-01-22 23:44 25 ****** 43 2022-01-22 23:45 25 ****** 44 2022-01-22 23:46 26 ******* 45 2022-01-22 23:47 26 ******* 46 2022-01-22 23:48 26 ******* 47 2022-01-22 23:49 27 ******** ... ..( 5 skipped). .. ******** 53 2022-01-22 23:55 27 ******** 54 2022-01-22 23:56 28 ********* 55 2022-01-22 23:57 27 ******** 56 2022-01-22 23:58 28 ********* ... ..( 24 skipped). .. ********* 81 2022-01-23 00:23 28 ********* 82 2022-01-23 00:24 27 ******** ... ..( 7 skipped). .. ******** 90 2022-01-23 00:32 27 ******** 91 2022-01-23 00:33 26 ******* ... ..( 21 skipped). .. ******* 113 2022-01-23 00:55 26 ******* 114 2022-01-23 00:56 25 ****** 115 2022-01-23 00:57 25 ****** 116 2022-01-23 00:58 26 ******* 117 2022-01-23 00:59 ? - 118 2022-01-23 01:00 26 ******* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1042 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1043 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3207507 Vendor specific


Hardware for Linux and BSD

GitHub