/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68WT0N0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 12 09:21:12 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (52320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 523) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 214 178 021 - 6275 4 Start_Stop_Count -O--CK 100 100 000 - 123 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 016 016 000 - 61715 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 123 192 Power-Off_Retract_Count -O--CK 200 200 000 - 86 193 Load_Cycle_Count -O--CK 188 188 000 - 38989 194 Temperature_Celsius -O---K 122 113 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 27145 hours (1131 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 a9 fa 10 40 00 Error: UNC at LBA = 0x36a9fa10 = 917109264 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 58 00 00 36 a9 fa 10 40 08 9d+18:02:08.607 READ FPDMA QUEUED 60 00 08 00 50 00 00 36 a9 78 80 40 08 9d+18:02:08.605 READ FPDMA QUEUED 60 00 08 00 48 00 00 36 a8 f8 70 40 08 9d+18:02:08.601 READ FPDMA QUEUED 60 00 08 00 40 00 00 36 a8 b8 e0 40 08 9d+18:02:08.597 READ FPDMA QUEUED 60 00 08 00 38 00 00 36 a8 77 58 40 08 9d+18:02:08.594 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 27145 hours (1131 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 6d 5f ca 30 40 00 Error: UNC at LBA = 0x16d5fca30 = 6129961520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 28 00 78 00 01 6d 5f ca 30 40 08 9d+17:54:44.796 READ FPDMA QUEUED 60 00 28 00 70 00 01 6d 5f c8 b0 40 08 9d+17:54:44.787 READ FPDMA QUEUED 60 00 08 00 68 00 01 6b 0f 02 88 40 08 9d+17:54:44.785 READ FPDMA QUEUED 60 00 08 00 60 00 01 6b 0e fb 58 40 08 9d+17:54:44.778 READ FPDMA QUEUED 60 00 08 00 58 00 01 6b 0e f9 20 40 08 9d+17:54:44.775 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 17338 hours (722 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 ab 2e 11 c8 40 00 Error: WP at LBA = 0xab2e11c8 = 2871923144 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 80 00 28 00 01 c3 ff 8e 60 40 08 25d+06:27:30.878 WRITE FPDMA QUEUED 60 01 00 00 20 00 00 ab 2e 15 78 40 08 25d+06:27:30.878 READ FPDMA QUEUED 60 00 80 00 18 00 00 ab 2e 12 48 40 08 25d+06:27:30.878 READ FPDMA QUEUED 61 01 00 00 10 00 01 c3 ff 8d 60 40 08 25d+06:27:30.878 WRITE FPDMA QUEUED 60 01 00 00 08 00 00 ab 2e 11 48 40 08 25d+06:27:30.878 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/35 Celsius Lifetime Min/Max Temperature: 23/40 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (323) Index Estimated Time Temperature Celsius 324 2023-10-12 01:24 32 ************* ... ..( 36 skipped). .. ************* 361 2023-10-12 02:01 32 ************* 362 2023-10-12 02:02 33 ************** ... ..( 7 skipped). .. ************** 370 2023-10-12 02:10 33 ************** 371 2023-10-12 02:11 34 *************** ... ..( 19 skipped). .. *************** 391 2023-10-12 02:31 34 *************** 392 2023-10-12 02:32 35 **************** ... ..( 8 skipped). .. **************** 401 2023-10-12 02:41 35 **************** 402 2023-10-12 02:42 34 *************** ... ..( 2 skipped). .. *************** 405 2023-10-12 02:45 34 *************** 406 2023-10-12 02:46 33 ************** ... ..( 20 skipped). .. ************** 427 2023-10-12 03:07 33 ************** 428 2023-10-12 03:08 32 ************* ... ..( 71 skipped). .. ************* 22 2023-10-12 04:20 32 ************* 23 2023-10-12 04:21 31 ************ ... ..( 27 skipped). .. ************ 51 2023-10-12 04:49 31 ************ 52 2023-10-12 04:50 32 ************* ... ..( 22 skipped). .. ************* 75 2023-10-12 05:13 32 ************* 76 2023-10-12 05:14 31 ************ ... ..( 52 skipped). .. ************ 129 2023-10-12 06:07 31 ************ 130 2023-10-12 06:08 30 *********** ... ..(124 skipped). .. *********** 255 2023-10-12 08:13 30 *********** 256 2023-10-12 08:14 32 ************* ... ..( 66 skipped). .. ************* 323 2023-10-12 09:21 32 ************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 159822 Vendor specific /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68WT0N0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 12 09:21:12 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (50580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 506) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 212 175 021 - 6391 4 Start_Stop_Count -O--CK 100 100 000 - 166 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 002 002 000 - 72124 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 166 192 Power-Off_Retract_Count -O--CK 200 200 000 - 114 193 Load_Cycle_Count -O--CK 198 198 000 - 7709 194 Temperature_Celsius -O---K 120 110 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 4 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 [3] occurred at disk power-on lifetime: 37578 hours (1565 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 73 fc 68 40 00 Error: UNC at LBA = 0x3673fc68 = 913570920 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c0 00 00 36 73 fc 68 40 08 9d+18:04:42.934 READ FPDMA QUEUED 60 00 08 00 b8 00 00 36 73 7b d0 40 08 9d+18:04:42.922 READ FPDMA QUEUED 60 00 08 00 b0 00 00 36 73 3a c8 40 08 9d+18:04:42.915 READ FPDMA QUEUED 60 00 08 00 a8 00 00 36 72 3b 90 40 08 9d+18:04:42.909 READ FPDMA QUEUED 60 00 08 00 a0 00 00 36 71 fe 08 40 08 9d+18:04:42.903 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 37578 hours (1565 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 55 d1 ba 48 40 00 Error: UNC at LBA = 0x155d1ba48 = 5734775368 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 40 00 01 55 d1 c1 d0 40 08 9d+17:57:19.127 READ FPDMA QUEUED 60 00 18 00 38 00 01 55 d1 ba 48 40 08 9d+17:57:19.127 READ FPDMA QUEUED 60 00 28 00 30 00 01 55 c6 1d d8 40 08 9d+17:57:19.121 READ FPDMA QUEUED 60 00 20 00 28 00 01 55 c6 1a d0 40 08 9d+17:57:19.121 READ FPDMA QUEUED 60 00 08 00 20 00 01 55 c6 19 78 40 08 9d+17:57:19.103 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 27781 hours (1157 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 04 79 6d 07 40 00 Error: UNC at LBA = 0x104796d07 = 4370033927 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 38 00 01 04 79 6d 88 40 08 25d+17:16:05.744 READ FPDMA QUEUED 60 00 80 00 30 00 01 04 79 6d 08 40 08 25d+17:16:05.744 READ FPDMA QUEUED 60 00 80 00 28 00 01 04 79 6c 88 40 08 25d+17:16:05.744 READ FPDMA QUEUED 60 00 80 00 20 00 01 04 79 6c 08 40 08 25d+17:16:05.743 READ FPDMA QUEUED 60 01 00 00 18 00 01 04 79 6b 08 40 08 25d+17:16:05.742 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 27770 hours (1157 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 ab 2e 12 28 40 00 Error: WP at LBA = 0xab2e1228 = 2871923240 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 38 00 01 c3 ff 8d 60 40 08 25d+06:28:08.913 WRITE FPDMA QUEUED 61 01 00 00 30 00 01 c3 ff 8c 60 40 08 25d+06:28:08.913 WRITE FPDMA QUEUED 60 01 00 00 28 00 00 ab 2e 11 48 40 08 25d+06:28:08.913 READ FPDMA QUEUED 60 01 00 00 20 00 00 ab 2e 10 48 40 08 25d+06:28:08.913 READ FPDMA QUEUED 60 01 00 00 18 00 00 ab 2e 0f 48 40 08 25d+06:28:08.913 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 31/37 Celsius Lifetime Min/Max Temperature: 24/42 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (79) Index Estimated Time Temperature Celsius 80 2023-10-12 01:24 34 *************** ... ..( 5 skipped). .. *************** 86 2023-10-12 01:30 34 *************** 87 2023-10-12 01:31 33 ************** ... ..(178 skipped). .. ************** 266 2023-10-12 04:30 33 ************** 267 2023-10-12 04:31 32 ************* ... ..(115 skipped). .. ************* 383 2023-10-12 06:27 32 ************* 384 2023-10-12 06:28 33 ************** ... ..(100 skipped). .. ************** 7 2023-10-12 08:09 33 ************** 8 2023-10-12 08:10 34 *************** ... ..( 2 skipped). .. *************** 11 2023-10-12 08:13 34 *************** 12 2023-10-12 08:14 35 **************** ... ..( 5 skipped). .. **************** 18 2023-10-12 08:20 35 **************** 19 2023-10-12 08:21 36 ***************** ... ..( 13 skipped). .. ***************** 33 2023-10-12 08:35 36 ***************** 34 2023-10-12 08:36 37 ****************** ... ..( 20 skipped). .. ****************** 55 2023-10-12 08:57 37 ****************** 56 2023-10-12 08:58 36 ***************** ... ..( 4 skipped). .. ***************** 61 2023-10-12 09:03 36 ***************** 62 2023-10-12 09:04 35 **************** ... ..( 7 skipped). .. **************** 70 2023-10-12 09:12 35 **************** 71 2023-10-12 09:13 34 *************** ... ..( 7 skipped). .. *************** 79 2023-10-12 09:21 34 *************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 159824 Vendor specific /dev/ada2 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD40EFRX-68WT0N0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 12 09:21:12 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (53460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 534) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 215 180 021 - 6225 4 Start_Stop_Count -O--CK 100 100 000 - 165 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 002 002 000 - 72124 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 165 192 Power-Off_Retract_Count -O--CK 200 200 000 - 113 193 Load_Cycle_Count -O--CK 198 198 000 - 7703 194 Temperature_Celsius -O---K 121 112 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 37577 hours (1565 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 36 8a 0e c0 40 00 Error: UNC at LBA = 0x368a0ec0 = 915017408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b0 00 00 36 8a fb f8 40 08 9d+18:03:46.484 READ FPDMA QUEUED 60 00 08 00 a8 00 00 36 8a bc f0 40 08 9d+18:03:46.477 READ FPDMA QUEUED 60 00 08 00 a0 00 00 36 8a 0e c0 40 08 9d+18:03:46.473 READ FPDMA QUEUED 60 00 08 00 98 00 00 36 89 ce 30 40 08 9d+18:03:46.468 READ FPDMA QUEUED 60 00 08 00 90 00 00 36 89 48 20 40 08 9d+18:03:46.466 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 37577 hours (1565 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 55 c6 19 70 40 00 Error: UNC at LBA = 0x155c61970 = 5734013296 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 38 00 d8 00 01 55 c6 19 70 40 08 9d+17:56:22.675 READ FPDMA QUEUED 60 00 08 00 d0 00 01 55 c6 16 60 40 08 9d+17:56:22.671 READ FPDMA QUEUED 60 00 18 00 c8 00 01 02 bf 55 20 40 08 9d+17:56:22.662 READ FPDMA QUEUED 60 00 18 00 c0 00 01 02 bf 52 b0 40 08 9d+17:56:22.653 READ FPDMA QUEUED 60 00 08 00 b8 00 00 f3 2a 48 60 40 08 9d+17:56:22.648 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/36 Celsius Lifetime Min/Max Temperature: 23/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (38) Index Estimated Time Temperature Celsius 39 2023-10-12 01:24 33 ************** ... ..( 24 skipped). .. ************** 64 2023-10-12 01:49 33 ************** 65 2023-10-12 01:50 32 ************* ... ..(136 skipped). .. ************* 202 2023-10-12 04:07 32 ************* 203 2023-10-12 04:08 31 ************ ... ..(138 skipped). .. ************ 342 2023-10-12 06:27 31 ************ 343 2023-10-12 06:28 32 ************* ... ..( 96 skipped). .. ************* 440 2023-10-12 08:05 32 ************* 441 2023-10-12 08:06 33 ************** ... ..( 8 skipped). .. ************** 450 2023-10-12 08:15 33 ************** 451 2023-10-12 08:16 34 *************** ... ..( 6 skipped). .. *************** 458 2023-10-12 08:23 34 *************** 459 2023-10-12 08:24 35 **************** ... ..( 17 skipped). .. **************** 477 2023-10-12 08:42 35 **************** 0 2023-10-12 08:43 36 ***************** ... ..( 9 skipped). .. ***************** 10 2023-10-12 08:53 36 ***************** 11 2023-10-12 08:54 35 **************** ... ..( 3 skipped). .. **************** 15 2023-10-12 08:58 35 **************** 16 2023-10-12 08:59 34 *************** ... ..( 5 skipped). .. *************** 22 2023-10-12 09:05 34 *************** 23 2023-10-12 09:06 33 ************** ... ..( 14 skipped). .. ************** 38 2023-10-12 09:21 33 ************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 159823 Vendor specific /dev/ada3 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT03B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 12 09:21:12 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 093 093 000 - 31508 12 Power_Cycle_Count -O--CK 099 099 000 - 31 177 Wear_Leveling_Count PO--C- 086 086 000 - 252 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 050 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 17 241 Total_LBAs_Written -O--CK 099 099 000 - 162061114353 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 26/42 Celsius Lifetime Min/Max Temperature: 22/50 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (42) Index Estimated Time Temperature Celsius 43 2023-10-11 12:10 29 ********** 44 2023-10-11 12:20 40 ********************* 45 2023-10-11 12:30 33 ************** 46 2023-10-11 12:40 29 ********** 47 2023-10-11 12:50 29 ********** 48 2023-10-11 13:00 29 ********** 49 2023-10-11 13:10 30 *********** 50 2023-10-11 13:20 29 ********** 51 2023-10-11 13:30 29 ********** 52 2023-10-11 13:40 30 *********** 53 2023-10-11 13:50 29 ********** 54 2023-10-11 14:00 30 *********** ... ..( 4 skipped). .. *********** 59 2023-10-11 14:50 30 *********** 60 2023-10-11 15:00 29 ********** 61 2023-10-11 15:10 29 ********** 62 2023-10-11 15:20 29 ********** 63 2023-10-11 15:30 32 ************* 64 2023-10-11 15:40 33 ************** 65 2023-10-11 15:50 30 *********** 66 2023-10-11 16:00 36 ***************** 67 2023-10-11 16:10 29 ********** 68 2023-10-11 16:20 30 *********** 69 2023-10-11 16:30 30 *********** 70 2023-10-11 16:40 29 ********** 71 2023-10-11 16:50 29 ********** 72 2023-10-11 17:00 30 *********** 73 2023-10-11 17:10 31 ************ 74 2023-10-11 17:20 30 *********** 75 2023-10-11 17:30 41 ********************** 76 2023-10-11 17:40 37 ****************** 77 2023-10-11 17:50 42 *********************** 78 2023-10-11 18:00 30 *********** 79 2023-10-11 18:10 30 *********** 80 2023-10-11 18:20 29 ********** 81 2023-10-11 18:30 30 *********** 82 2023-10-11 18:40 30 *********** 83 2023-10-11 18:50 35 **************** 84 2023-10-11 19:00 30 *********** 85 2023-10-11 19:10 31 ************ 86 2023-10-11 19:20 30 *********** 87 2023-10-11 19:30 30 *********** 88 2023-10-11 19:40 29 ********** 89 2023-10-11 19:50 31 ************ 90 2023-10-11 20:00 31 ************ 91 2023-10-11 20:10 31 ************ 92 2023-10-11 20:20 34 *************** 93 2023-10-11 20:30 30 *********** 94 2023-10-11 20:40 30 *********** 95 2023-10-11 20:50 30 *********** 96 2023-10-11 21:00 32 ************* 97 2023-10-11 21:10 29 ********** 98 2023-10-11 21:20 31 ************ 99 2023-10-11 21:30 29 ********** 100 2023-10-11 21:40 29 ********** 101 2023-10-11 21:50 29 ********** 102 2023-10-11 22:00 38 ******************* 103 2023-10-11 22:10 30 *********** 104 2023-10-11 22:20 29 ********** 105 2023-10-11 22:30 28 ********* 106 2023-10-11 22:40 29 ********** 107 2023-10-11 22:50 28 ********* ... ..( 26 skipped). .. ********* 6 2023-10-12 03:20 28 ********* 7 2023-10-12 03:30 35 **************** 8 2023-10-12 03:40 34 *************** 9 2023-10-12 03:50 29 ********** 10 2023-10-12 04:00 29 ********** 11 2023-10-12 04:10 28 ********* ... ..( 2 skipped). .. ********* 14 2023-10-12 04:40 28 ********* 15 2023-10-12 04:50 29 ********** 16 2023-10-12 05:00 28 ********* 17 2023-10-12 05:10 28 ********* 18 2023-10-12 05:20 29 ********** 19 2023-10-12 05:30 28 ********* 20 2023-10-12 05:40 29 ********** 21 2023-10-12 05:50 28 ********* ... ..( 3 skipped). .. ********* 25 2023-10-12 06:30 28 ********* 26 2023-10-12 06:40 27 ******** ... ..( 5 skipped). .. ******** 32 2023-10-12 07:40 27 ******** 33 2023-10-12 07:50 26 ******* 34 2023-10-12 08:00 27 ******** 35 2023-10-12 08:10 27 ******** 36 2023-10-12 08:20 26 ******* 37 2023-10-12 08:30 27 ******** ... ..( 4 skipped). .. ******** 42 2023-10-12 09:20 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 31 --- Lifetime Power-On Resets 0x01 0x010 4 31508 --- Power-on Hours 0x01 0x018 6 162061114353 --- Logical Sectors Written 0x01 0x020 6 2518307972 --- Number of Write Commands 0x01 0x028 6 75414517758 --- Logical Sectors Read 0x01 0x030 6 297387062 --- Number of Read Commands 0x01 0x038 6 3335000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3016 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 14 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/nvd0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Seagate FireCuda 520 SSD ZP500GM30002 Serial Number: -- Firmware Version: STNSC014 PCI Vendor/Subsystem ID: 0x1bb1 IEEE OUI Identifier: 0x0024cf Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 0024cf ... Local Time is: Thu Oct 12 09:21:12 2023 CEST Firmware Updates (0x1e): 7 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 90 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.14W - - 0 0 0 0 0 0 1 + 5.43W - - 1 1 1 1 0 0 2 + 4.57W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 37 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 7% Data Units Read: 6,578,625 [3.36 TB] Data Units Written: 35,342,504 [18.0 TB] Host Read Commands: 213,325,623 Host Write Commands: 1,160,191,867 Controller Busy Time: 3,504 Power Cycles: 18 Power On Hours: 19,695 Unsafe Shutdowns: 14 Media and Data Integrity Errors: 0 Error Information Log Entries: 57 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) No Errors Logged Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress Num Test_Description Status Power_on_Hours Failing_LBA NSID Seg SCT Code 0 Short Completed without error 13244 - - - - -