/dev/ada0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA750 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 27 03:19:29 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7167) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 120) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 142 142 054 - 68 3 Spin_Up_Time POS--- 123 123 024 - 186 (Average 185) 4 Start_Stop_Count -O--C- 100 100 000 - 2356 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 108 108 020 - 37 9 Power_On_Hours -O--C- 096 096 000 - 32789 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2255 192 Power-Off_Retract_Count -O--CK 098 098 000 - 2566 193 Load_Cycle_Count -O--C- 098 098 000 - 2566 194 Temperature_Celsius -O---- 136 136 000 - 44 (Min/Max 9/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 13774 hours (573 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 20 00 00 0e 04 15 17 0e 00 Error: ICRC, ABRT at LBA = 0x0e041517 = 235148567 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 80 00 d8 b7 00 04 14 37 ee 00 3d+03:04:21.491 WRITE DMA ca 00 00 00 00 96 53 76 96 53 77 ef 00 3d+03:04:21.427 WRITE DMA ca 00 00 00 00 96 52 76 96 52 77 ef 00 3d+03:04:21.427 WRITE DMA ca 00 00 00 00 96 51 76 96 51 77 ef 00 3d+03:04:21.426 WRITE DMA ca 00 00 00 00 04 14 36 96 50 77 ef 00 3d+03:04:21.425 WRITE DMA Error 1 [0] occurred at disk power-on lifetime: 13751 hours (572 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 12 00 00 0f 7d b6 a5 0f 00 Error: ICRC, ABRT at LBA = 0x0f7db6a5 = 259896997 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ca 00 00 00 40 7d b3 36 7d b6 77 ef 00 2d+04:22:32.866 WRITE DMA ca 00 00 00 40 7d b7 b6 7d b2 f7 ef 00 2d+04:22:32.866 WRITE DMA ca 00 00 00 40 7d b3 36 7d b7 77 ef 00 2d+04:22:32.865 WRITE DMA ca 00 00 00 40 7d aa b6 7d b2 f7 ef 00 2d+04:22:32.865 WRITE DMA ca 00 00 00 40 7d bb 76 7d aa 77 ef 00 2d+04:22:32.865 WRITE DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2875 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 44 Celsius Power Cycle Min/Max Temperature: 36/44 Celsius Lifetime Min/Max Temperature: 9/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (120) Index Estimated Time Temperature Celsius 121 2021-09-27 01:12 44 ************************* ... ..(126 skipped). .. ************************* 120 2021-09-27 03:19 44 ************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2255 --- Lifetime Power-On Resets 0x01 0x010 4 32789 --- Power-on Hours 0x01 0x018 6 40433482699 --- Logical Sectors Written 0x01 0x020 6 580946965 --- Number of Write Commands 0x01 0x028 6 1048965719848 --- Logical Sectors Read 0x01 0x030 6 526792970 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 32700 --- Spindle Motor Power-on Hours 0x03 0x010 4 32700 --- Head Flying Hours 0x03 0x018 4 2566 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 32 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 44 --- Current Temperature 0x05 0x010 1 41 N-- Average Short Term Temperature 0x05 0x018 1 41 N-- Average Long Term Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 9 --- Lowest Temperature 0x05 0x030 1 48 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 45 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 16998 --- Number of Hardware Resets 0x06 0x010 4 14709 --- Number of ASR Events 0x06 0x018 4 2 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 20 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/ada1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 870 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT01B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 27 03:19:31 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 4 9 Power_On_Hours -O--CK 099 099 000 - 1781 12 Power_Cycle_Count -O--CK 099 099 000 - 283 177 Wear_Leveling_Count PO--C- 099 099 000 - 3 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 4 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 099 099 010 - 4 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 069 054 000 - 31 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 33 241 Total_LBAs_Written -O--CK 099 099 000 - 3667953015 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 29/40 Celsius Lifetime Min/Max Temperature: 24/45 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (124) Index Estimated Time Temperature Celsius 125 2021-09-26 06:00 29 ********** ... ..( 8 skipped). .. ********** 6 2021-09-26 07:30 29 ********** 7 2021-09-26 07:40 32 ************* 8 2021-09-26 07:50 29 ********** ... ..( 3 skipped). .. ********** 12 2021-09-26 08:30 29 ********** 13 2021-09-26 08:40 ? - 14 2021-09-26 08:50 25 ****** 15 2021-09-26 09:00 25 ****** 16 2021-09-26 09:10 26 ******* 17 2021-09-26 09:20 27 ******** 18 2021-09-26 09:30 27 ******** 19 2021-09-26 09:40 28 ********* 20 2021-09-26 09:50 28 ********* 21 2021-09-26 10:00 28 ********* 22 2021-09-26 10:10 29 ********** ... ..( 51 skipped). .. ********** 74 2021-09-26 18:50 29 ********** 75 2021-09-26 19:00 ? - 76 2021-09-26 19:10 25 ****** 77 2021-09-26 19:20 26 ******* 78 2021-09-26 19:30 27 ******** 79 2021-09-26 19:40 27 ******** 80 2021-09-26 19:50 28 ********* 81 2021-09-26 20:00 ? - 82 2021-09-26 20:10 29 ********** ... ..( 7 skipped). .. ********** 90 2021-09-26 21:30 29 ********** 91 2021-09-26 21:40 30 *********** ... ..( 15 skipped). .. *********** 107 2021-09-27 00:20 30 *********** 108 2021-09-27 00:30 31 ************ ... ..( 2 skipped). .. ************ 111 2021-09-27 01:00 31 ************ 112 2021-09-27 01:10 32 ************* 113 2021-09-27 01:20 31 ************ 114 2021-09-27 01:30 31 ************ 115 2021-09-27 01:40 35 **************** 116 2021-09-27 01:50 33 ************** 117 2021-09-27 02:00 31 ************ 118 2021-09-27 02:10 31 ************ 119 2021-09-27 02:20 34 *************** 120 2021-09-27 02:30 32 ************* 121 2021-09-27 02:40 31 ************ ... ..( 2 skipped). .. ************ 124 2021-09-27 03:10 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 283 --- Lifetime Power-On Resets 0x01 0x010 4 1781 --- Power-on Hours 0x01 0x018 6 3667953015 --- Logical Sectors Written 0x01 0x020 6 50934850 --- Number of Write Commands 0x01 0x028 6 1816744040 --- Logical Sectors Read 0x01 0x030 6 27741047 --- Number of Read Commands 0x01 0x038 6 412000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x020 1 45 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2647 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 20 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada2 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AQ10003 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Sep 27 03:19:31 2021 CEST ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20820) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 347) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1 2 Throughput_Performance -OS--K 055 055 000 - 19172 3 Spin_Up_Time PO---K 067 065 025 - 10281 4 Start_Stop_Count -O--CK 096 096 000 - 4213 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 50615 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3766 181 Program_Fail_Cnt_Total -O---K 099 099 000 - 32473619 191 G-Sense_Error_Rate -O---K 100 100 000 - 142 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 054 046 000 - 46 (Min/Max 8/54) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 2 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 22 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 4270 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 40074 hours (1669 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 40 00 00 17 1d b5 c0 40 00 Error: ICRC, ABRT 64 sectors at LBA = 0x171db5c0 = 387823040 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 17 1d b5 c0 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 50 48 7e 40 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 50 48 76 80 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 50 44 69 c0 40 00 00:00:08.416 READ DMA EXT 25 00 00 00 40 00 00 18 1a da 80 40 00 00:00:08.416 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 17542 hours (730 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 60 00 00 49 a6 42 00 40 00 Error: ICRC, ABRT 96 sectors at LBA = 0x49a64200 = 1235632640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 49 a6 41 60 40 00 00:01:27.889 READ DMA EXT 25 00 00 00 20 00 00 3a f0 3f c0 40 00 00:01:27.889 READ DMA EXT 25 00 00 00 80 00 00 49 a6 40 e0 40 00 00:01:27.889 READ DMA EXT 25 00 00 01 00 00 00 49 a6 3f e0 40 00 00:01:27.889 READ DMA EXT 25 00 00 00 20 00 00 49 a6 3f c0 40 00 00:01:27.889 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 21194 - # 2 Short offline Completed without error 00% 20835 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 46 Celsius Power Cycle Min/Max Temperature: 33/47 Celsius Lifetime Min/Max Temperature: 8/60 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (44) Index Estimated Time Temperature Celsius 45 2021-09-26 16:40 46 *************************** 46 2021-09-26 16:45 40 ********************* ... ..( 12 skipped). .. ********************* 59 2021-09-26 17:50 40 ********************* 60 2021-09-26 17:55 41 ********************** 61 2021-09-26 18:00 40 ********************* ... ..( 15 skipped). .. ********************* 77 2021-09-26 19:20 40 ********************* 78 2021-09-26 19:25 41 ********************** 79 2021-09-26 19:30 40 ********************* ... ..( 2 skipped). .. ********************* 82 2021-09-26 19:45 40 ********************* 83 2021-09-26 19:50 39 ******************** 84 2021-09-26 19:55 40 ********************* ... ..( 8 skipped). .. ********************* 93 2021-09-26 20:40 40 ********************* 94 2021-09-26 20:45 41 ********************** 95 2021-09-26 20:50 40 ********************* 96 2021-09-26 20:55 40 ********************* 97 2021-09-26 21:00 41 ********************** 98 2021-09-26 21:05 22 *** 99 2021-09-26 21:10 24 ***** 100 2021-09-26 21:15 26 ******* 101 2021-09-26 21:20 27 ******** 102 2021-09-26 21:25 30 *********** 103 2021-09-26 21:30 30 *********** 104 2021-09-26 21:35 31 ************ 105 2021-09-26 21:40 33 ************** 106 2021-09-26 21:45 33 ************** 107 2021-09-26 21:50 34 *************** 108 2021-09-26 21:55 35 **************** 109 2021-09-26 22:00 34 *************** 110 2021-09-26 22:05 35 **************** 111 2021-09-26 22:10 36 ***************** 112 2021-09-26 22:15 37 ****************** 113 2021-09-26 22:20 37 ****************** 114 2021-09-26 22:25 37 ****************** 115 2021-09-26 22:30 38 ******************* 116 2021-09-26 22:35 38 ******************* 117 2021-09-26 22:40 38 ******************* 118 2021-09-26 22:45 39 ******************** ... ..( 3 skipped). .. ******************** 122 2021-09-26 23:05 39 ******************** 123 2021-09-26 23:10 40 ********************* 124 2021-09-26 23:15 40 ********************* 125 2021-09-26 23:20 39 ******************** 126 2021-09-26 23:25 40 ********************* ... ..( 2 skipped). .. ********************* 1 2021-09-26 23:40 40 ********************* 2 2021-09-26 23:45 41 ********************** 3 2021-09-26 23:50 40 ********************* 4 2021-09-26 23:55 40 ********************* 5 2021-09-27 00:00 41 ********************** ... ..( 4 skipped). .. ********************** 10 2021-09-27 00:25 41 ********************** 11 2021-09-27 00:30 42 *********************** 12 2021-09-27 00:35 41 ********************** ... ..( 12 skipped). .. ********************** 25 2021-09-27 01:40 41 ********************** 26 2021-09-27 01:45 43 ************************ 27 2021-09-27 01:50 45 ************************** 28 2021-09-27 01:55 45 ************************** 29 2021-09-27 02:00 46 *************************** 30 2021-09-27 02:05 46 *************************** 31 2021-09-27 02:10 46 *************************** 32 2021-09-27 02:15 47 **************************** ... ..( 8 skipped). .. **************************** 41 2021-09-27 03:00 47 **************************** 42 2021-09-27 03:05 46 *************************** 43 2021-09-27 03:10 46 *************************** 44 2021-09-27 03:15 46 *************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 21 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 20 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/ada3 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG Device Model: SAMSUNG HD502HI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AG01113 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Mon Sep 27 03:19:33 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6582) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 12) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 093 093 011 - 3180 4 Start_Stop_Count -O--CK 093 093 000 - 6611 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 10036 9 Power_On_Hours -O--CK 088 088 000 - 59033 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 5845 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 055 000 - 33 (Min/Max 28/33) 194 Temperature_Celsius -O---K 067 053 000 - 33 (Min/Max 28/33) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 71499 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 2 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 53076 hours (2211 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 04 00 00 00 00 db 4b c0 40 00 04:58:01.620 WRITE FPDMA QUEUED 61 00 00 00 e8 00 00 00 75 a0 98 40 00 04:58:01.620 WRITE FPDMA QUEUED 61 00 00 00 e8 00 00 00 75 91 98 40 00 04:58:01.610 WRITE FPDMA QUEUED 61 00 00 00 e0 00 00 00 6d 88 a0 40 00 04:58:01.610 WRITE FPDMA QUEUED 61 00 00 00 f0 00 00 00 6a 50 08 40 00 04:58:01.600 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 29603 - # 2 Extended offline Aborted by host 80% 1400 - # 3 Extended offline Aborted by host 90% 1400 - # 4 Extended offline Aborted by host 90% 1400 - # 5 Extended offline Aborted by host 90% 1400 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: --/33 Celsius Lifetime Min/Max Temperature: --/48 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (41) Index Estimated Time Temperature Celsius 42 2021-09-27 01:12 33 ************** ... ..(126 skipped). .. ************** 41 2021-09-27 03:19 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 20 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/da0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda LP Device Model: ST32000542AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC34 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Sep 27 03:19:33 2021 CEST ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213915en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM level is: 192 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 443) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 116 084 006 - 113542031 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 1005 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 276077060 9 Power_On_Hours -O--CK 074 074 000 - 23405 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 970 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 963 188 Command_Timeout -O--CK 100 095 000 - 34360393790 189 High_Fly_Writes -O-RCK 001 001 000 - 157 190 Airflow_Temperature_Cel -O---K 066 050 045 - 34 (Min/Max 25/34) 194 Temperature_Celsius -O---K 034 050 000 - 34 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 047 031 000 - 113542031 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 18499 (99 32 0) 241 Total_LBAs_Written ------ 100 253 000 - 1823615718 242 Total_LBAs_Read ------ 100 253 000 - 1923176435 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL,SL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 963 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 963 [2] occurred at disk power-on lifetime: 21615 hours (900 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 43 52 00 00 Error: UNC at LBA = 0xe8d44352 = 3906224978 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 18 00 00 e8 d4 43 48 40 00 2d+14:34:32.064 READ FPDMA QUEUED 61 00 00 00 80 00 00 75 b4 6f 80 40 00 2d+14:34:30.716 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 75 b4 6f 00 40 00 2d+14:34:30.716 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 75 b4 6e 80 40 00 2d+14:34:30.715 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 75 b4 6e 00 40 00 2d+14:34:30.715 WRITE FPDMA QUEUED Error 962 [1] occurred at disk power-on lifetime: 21609 hours (900 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 25 04 00 00 Error: WP at LBA = 0xe8d42504 = 3906217220 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 80 00 00 c4 06 75 80 40 00 2d+09:20:59.448 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c4 06 75 00 40 00 2d+09:20:59.275 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c4 06 74 80 40 00 2d+09:20:59.275 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c4 06 74 00 40 00 2d+09:20:59.275 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c4 06 73 80 40 00 2d+09:20:59.274 WRITE FPDMA QUEUED Error 961 [0] occurred at disk power-on lifetime: 21609 hours (900 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 24 f7 00 00 Error: WP at LBA = 0xe8d424f7 = 3906217207 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 08 00 00 c0 33 34 d8 40 00 2d+09:20:55.234 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 e8 d4 25 80 40 00 2d+09:20:55.226 READ FPDMA QUEUED 60 00 00 00 80 00 00 e8 d4 25 00 40 00 2d+09:20:55.225 READ FPDMA QUEUED 60 00 00 00 80 00 00 e8 d4 24 80 40 00 2d+09:20:55.225 READ FPDMA QUEUED 60 00 00 00 80 00 00 e8 d4 24 00 40 00 2d+09:20:55.225 READ FPDMA QUEUED Error 960 [19] occurred at disk power-on lifetime: 21606 hours (900 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 18 cb 00 00 Error: WP at LBA = 0xe8d418cb = 3906214091 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 80 00 00 60 22 12 00 40 00 2d+06:18:55.734 WRITE FPDMA QUEUED 60 00 00 00 10 00 00 60 22 0f f0 40 00 2d+06:18:55.733 READ FPDMA QUEUED 60 00 00 00 80 00 00 20 25 d9 80 40 00 2d+06:18:55.733 READ FPDMA QUEUED 60 00 00 00 80 00 00 20 25 d9 00 40 00 2d+06:18:55.733 READ FPDMA QUEUED 60 00 00 00 80 00 00 20 25 d8 80 40 00 2d+06:18:55.733 READ FPDMA QUEUED Error 959 [18] occurred at disk power-on lifetime: 21604 hours (900 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 32 98 00 00 Error: WP at LBA = 0xe8d43298 = 3906220696 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 80 00 00 c0 2c b5 80 40 00 2d+03:50:32.607 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c0 2c b5 00 40 00 2d+03:50:32.606 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c0 2c b4 80 40 00 2d+03:50:32.605 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 c0 2c b4 00 40 00 2d+03:50:32.604 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 91 ff 15 80 40 00 2d+03:50:32.591 WRITE FPDMA QUEUED Error 958 [17] occurred at disk power-on lifetime: 21603 hours (900 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 4f 23 00 00 Error: WP at LBA = 0xe8d44f23 = 3906228003 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 80 00 00 6e 5c e3 80 40 00 2d+03:13:50.282 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e3 00 40 00 2d+03:13:50.281 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e2 80 40 00 2d+03:13:50.281 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e2 00 40 00 2d+03:13:50.280 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e1 80 40 00 2d+03:13:50.279 WRITE FPDMA QUEUED Error 957 [16] occurred at disk power-on lifetime: 21603 hours (900 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 4f f9 00 00 Error: WP at LBA = 0xe8d44ff9 = 3906228217 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 80 00 00 6e 5c e5 80 40 00 2d+03:13:45.859 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e5 00 40 00 2d+03:13:45.859 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e4 80 40 00 2d+03:13:45.859 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c e4 00 40 00 2d+03:13:45.859 WRITE FPDMA QUEUED 61 00 00 00 80 00 00 6e 5c db 80 40 00 2d+03:13:45.859 WRITE FPDMA QUEUED Error 956 [15] occurred at disk power-on lifetime: 21603 hours (900 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 d4 4e 73 00 00 Error: UNC at LBA = 0xe8d44e73 = 3906227827 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 e8 d4 4f 80 40 00 2d+03:13:41.891 READ FPDMA QUEUED 60 00 00 00 80 00 00 e8 d4 4f 00 40 00 2d+03:13:41.891 READ FPDMA QUEUED 60 00 00 00 80 00 00 e8 d4 4e 80 40 00 2d+03:13:41.891 READ FPDMA QUEUED 60 00 00 00 80 00 00 e8 d4 4e 00 40 00 2d+03:13:41.891 READ FPDMA QUEUED 60 00 00 00 08 00 00 6a c9 92 c0 40 00 2d+03:13:41.888 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 25/33 Celsius Lifetime Min/Max Temperature: 11/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (102) Index Estimated Time Temperature Celsius 103 2021-09-21 22:11 25 ****** 104 2021-09-21 23:10 ? - 105 2021-09-22 00:09 25 ****** 106 2021-09-22 01:08 25 ****** 107 2021-09-22 02:07 ? - 108 2021-09-22 03:06 25 ****** 109 2021-09-22 04:05 ? - 110 2021-09-22 05:04 25 ****** 111 2021-09-22 06:03 ? - 112 2021-09-22 07:02 24 ***** 113 2021-09-22 08:01 ? - 114 2021-09-22 09:00 25 ****** 115 2021-09-22 09:59 25 ****** 116 2021-09-22 10:58 36 ***************** 117 2021-09-22 11:57 ? - 118 2021-09-22 12:56 25 ****** 119 2021-09-22 13:55 ? - 120 2021-09-22 14:54 26 ******* 121 2021-09-22 15:53 ? - 122 2021-09-22 16:52 27 ******** 123 2021-09-22 17:51 27 ******** 124 2021-09-22 18:50 29 ********** 125 2021-09-22 19:49 41 ********************** 126 2021-09-22 20:48 ? - 127 2021-09-22 21:47 25 ****** 0 2021-09-22 22:46 ? - 1 2021-09-22 23:45 22 *** 2 2021-09-23 00:44 ? - 3 2021-09-23 01:43 24 ***** 4 2021-09-23 02:42 ? - 5 2021-09-23 03:41 24 ***** 6 2021-09-23 04:40 ? - 7 2021-09-23 05:39 24 ***** 8 2021-09-23 06:38 ? - 9 2021-09-23 07:37 22 *** 10 2021-09-23 08:36 ? - 11 2021-09-23 09:35 22 *** 12 2021-09-23 10:34 ? - 13 2021-09-23 11:33 24 ***** 14 2021-09-23 12:32 ? - 15 2021-09-23 13:31 22 *** 16 2021-09-23 14:30 ? - 17 2021-09-23 15:29 25 ****** 18 2021-09-23 16:28 ? - 19 2021-09-23 17:27 30 *********** 20 2021-09-23 18:26 ? - 21 2021-09-23 19:25 25 ****** 22 2021-09-23 20:24 ? - 23 2021-09-23 21:23 24 ***** 24 2021-09-23 22:22 ? - 25 2021-09-23 23:21 25 ****** 26 2021-09-24 00:20 ? - 27 2021-09-24 01:19 25 ****** 28 2021-09-24 02:18 ? - 29 2021-09-24 03:17 35 **************** 30 2021-09-24 04:16 ? - 31 2021-09-24 05:15 25 ****** 32 2021-09-24 06:14 ? - 33 2021-09-24 07:13 26 ******* 34 2021-09-24 08:12 ? - 35 2021-09-24 09:11 28 ********* 36 2021-09-24 10:10 ? - 37 2021-09-24 11:09 25 ****** 38 2021-09-24 12:08 25 ****** 39 2021-09-24 13:07 38 ******************* 40 2021-09-24 14:06 ? - 41 2021-09-24 15:05 27 ******** 42 2021-09-24 16:04 ? - 43 2021-09-24 17:03 25 ****** 44 2021-09-24 18:02 ? - 45 2021-09-24 19:01 23 **** 46 2021-09-24 20:00 ? - 47 2021-09-24 20:59 24 ***** 48 2021-09-24 21:58 ? - 49 2021-09-24 22:57 27 ******** 50 2021-09-24 23:56 ? - 51 2021-09-25 00:55 26 ******* 52 2021-09-25 01:54 ? - 53 2021-09-25 02:53 28 ********* 54 2021-09-25 03:52 28 ********* 55 2021-09-25 04:51 ? - 56 2021-09-25 05:50 24 ***** 57 2021-09-25 06:49 ? - 58 2021-09-25 07:48 27 ******** 59 2021-09-25 08:47 ? - 60 2021-09-25 09:46 30 *********** 61 2021-09-25 10:45 ? - 62 2021-09-25 11:44 25 ****** 63 2021-09-25 12:43 ? - 64 2021-09-25 13:42 30 *********** 65 2021-09-25 14:41 ? - 66 2021-09-25 15:40 24 ***** 67 2021-09-25 16:39 ? - 68 2021-09-25 17:38 23 **** 69 2021-09-25 18:37 ? - 70 2021-09-25 19:36 25 ****** 71 2021-09-25 20:35 25 ****** 72 2021-09-25 21:34 33 ************** 73 2021-09-25 22:33 39 ******************** 74 2021-09-25 23:32 38 ******************* ... ..( 2 skipped). .. ******************* 77 2021-09-26 02:29 38 ******************* 78 2021-09-26 03:28 ? - 79 2021-09-26 04:27 23 **** 80 2021-09-26 05:26 ? - 81 2021-09-26 06:25 24 ***** 82 2021-09-26 07:24 ? - 83 2021-09-26 08:23 23 **** 84 2021-09-26 09:22 ? - 85 2021-09-26 10:21 23 **** 86 2021-09-26 11:20 ? - 87 2021-09-26 12:19 30 *********** 88 2021-09-26 13:18 ? - 89 2021-09-26 14:17 24 ***** 90 2021-09-26 15:16 ? - 91 2021-09-26 16:15 24 ***** 92 2021-09-26 17:14 ? - 93 2021-09-26 18:13 25 ****** 94 2021-09-26 19:12 ? - 95 2021-09-26 20:11 26 ******* 96 2021-09-26 21:10 26 ******* 97 2021-09-26 22:09 38 ******************* 98 2021-09-26 23:08 ? - 99 2021-09-27 00:07 25 ****** 100 2021-09-27 01:06 ? - 101 2021-09-27 02:05 25 ****** 102 2021-09-27 03:04 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/nvme0 smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-RELEASE-p4 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: PNY CS3030 500GB SSD Serial Number: -- Firmware Version: CS303226 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Mon Sep 27 03:19:33 2021 CEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.55W - - 0 0 0 0 0 0 1 + 4.49W - - 1 1 1 1 0 0 2 + 3.97W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 26 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 5,375,102 [2.75 TB] Data Units Written: 3,484,973 [1.78 TB] Host Read Commands: 63,276,571 Host Write Commands: 38,369,095 Controller Busy Time: 243 Power Cycles: 312 Power On Hours: 1,791 Unsafe Shutdowns: 33 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,532 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) No Errors Logged