/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M40/60/80 Device Model: SAMSUNG HM080HI Serial Number: -- Firmware Version: AB100-12 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Tue Aug 11 21:39:39 2020 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 2670) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 44) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0 3 Spin_Up_Time POS--- 253 253 025 - 2304 4 Start_Stop_Count -O--CK 070 070 000 - 30953 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 1 7 Seek_Error_Rate -OSR-- 253 253 000 - 0 8 Seek_Time_Performance --S--K 253 253 000 - 0 9 Power_On_Half_Minutes -O--CK 098 098 000 - 15054h+41m 10 Spin_Retry_Count -O--CK 100 100 000 - 30 11 Calibration_Retry_Count -O--C- 100 100 000 - 4 12 Power_Cycle_Count -O--CK 095 095 000 - 5052 187 Reported_Uncorrect -O--CK 077 077 000 - 24 188 Command_Timeout -O--CK 253 253 000 - 0 190 Airflow_Temperature_Cel -O---K 054 038 040 Past 46 (Min/Max 13/62) 191 G-Sense_Error_Rate -O--C- 089 089 000 - 116567 192 Power-Off_Retract_Count -O--C- 100 100 000 - 918 193 Load_Cycle_Count -O--C- 054 054 000 - 466783 194 Temperature_Celsius -O---K 054 038 000 - 46 (Min/Max 13/62) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 29070 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O--C- 253 100 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O--C- 253 253 000 - 0 223 Load_Retry_Count -O--C- 100 100 000 - 4 225 Load_Cycle_Count -O--C- 054 054 000 - 466783 255 Unknown_Attribute -O-R-- 253 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Invalid Error Log index = 0x0600 (reserved = 0x00) SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 13047 147068954 # 2 Short offline Completed without error 00% 12261 - # 3 Short offline Interrupted (host reset) 80% 10708 - # 4 Short offline Completed without error 00% 5551 - # 5 Short offline Completed without error 00% 3134 - # 6 Short offline Completed without error 00% 2421 - # 7 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 46 Celsius Power Cycle Min/Max Temperature: --/46 Celsius Lifetime Min/Max Temperature: --/62 Celsius Unknown SCT Status format version 0, should be 2 or 3. Read SCT Temperature History failed Read SCT Status failed: Input/output error SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Input/output error Read SATA Phy Event Counters failed