/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue and Green SSDs Device Model: WDC WDS120G1G0A-00SS50 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: Z3311000 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Feb 7 07:21:09 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 000 100 000 - 6787 12 Power_Cycle_Count -O--CK 100 100 000 - 3080 165 Block_Erase_Count -O--CK 100 100 000 - 30353056734919 166 Minimum_PE_Cycles_TLC -O--CK 100 100 000 - 85 167 Max_Bad_Blocks_per_Die -O--CK 100 100 000 - 0 168 Maximum_PE_Cycles_TLC -O--CK 100 100 000 - 186 169 Total_Bad_Blocks -O--CK 100 100 000 - 0 170 Grown_Bad_Blocks -O--CK 100 100 000 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 133 174 Unexpected_Power_Loss -O--CK 100 100 000 - 527 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 059 035 000 - 41 (Min/Max 0/65) 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 2 230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x0a42076c0a42 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 NAND_GB_Written_TLC -O--CK 100 100 000 - 15893 234 NAND_GB_Written_SLC -O--CK 100 100 000 - 36814 241 Host_Writes_GiB ----CK 253 253 000 - 19264 242 Host_Reads_GiB ----CK 253 253 000 - 26943 244 Temp_Throttle_Status -O--CK 000 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] log entry is empty Error 2 [1] log entry is empty Error 1 [0] log entry is empty SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6316 - # 2 Short offline Completed without error 00% 6302 - # 3 Short offline Completed without error 00% 6296 - # 4 Short offline Completed without error 00% 6269 - # 5 Short offline Completed without error 00% 2595 - # 6 Short offline Completed without error 00% 2532 - # 7 Short offline Completed without error 00% 1739 - # 8 Short offline Completed without error 00% 357 - # 9 Short offline Completed without error 00% 337 - #10 Short offline Interrupted (host reset) 90% 126 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3080 --- Lifetime Power-On Resets 0x01 0x010 4 6787 --- Power-on Hours 0x01 0x018 6 1745941796 --- Logical Sectors Written 0x01 0x020 6 491111442 --- Number of Write Commands 0x01 0x028 6 669489404 --- Logical Sectors Read 0x01 0x030 6 892411323 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 4 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET /dev/da3 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD10JMVW-11AJGS0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Feb 7 07:21:09 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18900) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 211) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 4 3 Spin_Up_Time POS--K 175 172 021 - 2216 4 Start_Stop_Count -O--CK 099 099 000 - 1578 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 199 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 659 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 270 192 Power-Off_Retract_Count -O--CK 200 200 000 - 128 193 Load_Cycle_Count -O--CK 198 198 000 - 6601 194 Temperature_Celsius -O---K 105 099 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 6 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 39 hours (1 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 00 90 00 40 00 Error: UNC 8 sectors at LBA = 0x00009000 = 36864 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 90 00 40 00 00:01:02.840 READ DMA EXT 25 00 00 00 08 00 00 00 00 90 00 40 00 00:00:59.504 READ DMA EXT 25 00 00 00 08 00 00 6e 30 48 80 40 00 00:00:59.504 READ DMA EXT 25 00 00 00 08 00 00 00 00 88 00 40 00 00:00:59.500 READ DMA EXT 25 00 00 00 08 00 00 6e 30 48 40 40 00 00:00:59.499 READ DMA EXT Error 4 [3] occurred at disk power-on lifetime: 39 hours (1 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 00 90 00 40 00 Error: UNC 8 sectors at LBA = 0x00009000 = 36864 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 90 00 40 00 00:00:59.504 READ DMA EXT 25 00 00 00 08 00 00 6e 30 48 80 40 00 00:00:59.504 READ DMA EXT 25 00 00 00 08 00 00 00 00 88 00 40 00 00:00:59.500 READ DMA EXT 25 00 00 00 08 00 00 6e 30 48 40 40 00 00:00:59.499 READ DMA EXT 25 00 00 00 08 00 00 00 00 84 00 40 00 00:00:59.498 READ DMA EXT Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 3f 20 8a 76 40 00 Error: UNC 64 sectors at LBA = 0x3f208a76 = 1059097206 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 3f 20 8a 76 40 00 00:00:31.769 READ DMA EXT 25 00 00 00 40 00 00 3f 20 8a 76 40 00 00:00:28.281 READ DMA EXT e1 00 00 00 02 00 00 00 00 00 00 00 00 00:00:16.431 IDLE IMMEDIATE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:13.491 IDENTIFY DEVICE Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 3f 20 8a 76 40 00 Error: UNC 64 sectors at LBA = 0x3f208a76 = 1059097206 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 3f 20 8a 76 40 00 00:00:28.281 READ DMA EXT e1 00 00 00 02 00 00 00 00 00 00 00 00 00:00:16.431 IDLE IMMEDIATE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:13.491 IDENTIFY DEVICE Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 02 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- e1 00 00 00 02 00 00 00 00 00 00 00 00 00:00:16.431 IDLE IMMEDIATE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:13.491 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 314 567887672 # 2 Short offline Completed: read failure 90% 305 567887672 # 3 Short offline Completed: read failure 90% 297 567887672 # 4 Short offline Completed: read failure 90% 264 567887672 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 37/42 Celsius Lifetime Min/Max Temperature: 26/49 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (76) Index Estimated Time Temperature Celsius 77 2021-02-07 05:14 ? - 78 2021-02-07 05:15 36 ***************** 79 2021-02-07 05:16 36 ***************** 80 2021-02-07 05:17 37 ****************** ... ..( 3 skipped). .. ****************** 84 2021-02-07 05:21 37 ****************** 85 2021-02-07 05:22 36 ***************** ... ..( 22 skipped). .. ***************** 108 2021-02-07 05:45 36 ***************** 109 2021-02-07 05:46 35 **************** ... ..( 3 skipped). .. **************** 113 2021-02-07 05:50 35 **************** 114 2021-02-07 05:51 ? - 115 2021-02-07 05:52 35 **************** 116 2021-02-07 05:53 36 ***************** ... ..( 3 skipped). .. ***************** 120 2021-02-07 05:57 36 ***************** 121 2021-02-07 05:58 37 ****************** 122 2021-02-07 05:59 ? - 123 2021-02-07 06:00 37 ****************** 124 2021-02-07 06:01 37 ****************** 125 2021-02-07 06:02 37 ****************** 126 2021-02-07 06:03 38 ******************* 127 2021-02-07 06:04 39 ******************** 0 2021-02-07 06:05 39 ******************** 1 2021-02-07 06:06 39 ******************** 2 2021-02-07 06:07 40 ********************* ... ..( 10 skipped). .. ********************* 13 2021-02-07 06:18 40 ********************* 14 2021-02-07 06:19 41 ********************** ... ..( 24 skipped). .. ********************** 39 2021-02-07 06:44 41 ********************** 40 2021-02-07 06:45 42 *********************** ... ..( 35 skipped). .. *********************** 76 2021-02-07 07:21 42 *********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 4919 Vendor specific