/dev/sd0c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SanDisk based SSDs Device Model: SanDisk SDSSDP128G Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 2.0.0 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 1.8 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Mar 20 12:46:38 2021 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 24) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 1340 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 2768 171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 255 174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 252 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 850 232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0 234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 1183 241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 25052213771 242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 46610508438 SMART Error Log Version: 1 No Errors Logged Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 707 - # 2 Short offline Aborted by host 00% 696 - # 3 Short offline Completed without error 00% 683 - # 4 Short offline Completed without error 00% 607 - # 5 Short offline Completed without error 00% 561 - # 6 Short offline Completed without error 00% 468 - # 7 Short offline Completed without error 00% 372 - # 8 Short offline Completed without error 00% 347 - # 9 Short offline Completed without error 00% 331 - #10 Short offline Completed without error 00% 249 - #11 Short offline Aborted by host 60% 149 - #12 Short offline Completed without error 00% 138 - #13 Short offline Completed without error 00% 63 - #14 Short offline Aborted by host 10% 41 - #15 Short offline Completed without error 00% 31 - #16 Short offline Completed without error 00% 6 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. /dev/sd1c smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: OPENBSD Product: SR CRYPTO Revision: 006 User Capacity: 119,446,708,224 bytes [119 GB] Logical block size: 512 bytes >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.