/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 30 10:01:20 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (13860) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 3896 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 094 090 025 - 2046 4 Start_Stop_Count -O--CK 095 095 000 - 5908 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 29478 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4328 191 G-Sense_Error_Rate -O---K 100 100 000 - 349 192 Power-Off_Retract_Count -O---K 099 099 000 - 1175 194 Temperature_Celsius -O---- 064 054 000 - 30 (Min/Max 9/46) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 13 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 67547 223 Load_Retry_Count -O--CK 096 096 000 - 4186 225 Load_Cycle_Count -O--CK 001 001 000 - 2273636 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 3511 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3511 [6] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 f8 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.840 READ FPDMA QUEUED 61 00 00 00 20 00 00 5d 2f f1 40 40 08 00:00:00.841 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 5d 4f f0 c0 40 08 00:00:00.841 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 5d 2f f0 c0 40 08 00:00:00.841 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 5d 4f ef a0 40 08 00:00:00.841 WRITE FPDMA QUEUED Error 3510 [5] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 f8 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.832 READ FPDMA QUEUED 60 00 00 00 20 00 00 5d 23 a2 40 40 08 00:00:00.834 READ FPDMA QUEUED 60 00 00 00 20 00 00 5d 21 90 00 40 08 00:00:00.834 READ FPDMA QUEUED 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.834 READ FPDMA QUEUED 60 00 00 00 20 00 00 5d 21 8f a0 40 08 00:00:00.834 READ FPDMA QUEUED Error 3509 [4] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 f8 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.821 READ FPDMA QUEUED 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.824 READ FPDMA QUEUED 60 00 00 00 80 00 00 73 70 6f 80 40 08 00:00:00.824 READ FPDMA QUEUED 60 00 00 00 c0 00 00 73 70 6e 40 40 08 00:00:00.824 READ FPDMA QUEUED 60 00 00 00 80 00 00 73 70 6f 00 40 08 00:00:00.824 READ FPDMA QUEUED Error 3508 [3] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 f8 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.817 READ FPDMA QUEUED 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.821 READ FPDMA QUEUED 60 00 00 00 80 00 00 73 70 6f 80 40 08 00:00:00.821 READ FPDMA QUEUED 60 00 00 00 c0 00 00 73 70 6e 40 40 08 00:00:00.821 READ FPDMA QUEUED 60 00 00 00 80 00 00 73 70 6f 00 40 08 00:00:00.821 READ FPDMA QUEUED Error 3507 [2] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 f8 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.816 READ FPDMA QUEUED 60 00 00 04 00 00 00 5d 18 74 00 40 08 00:00:00.818 READ FPDMA QUEUED 60 00 00 00 80 00 00 73 70 6f 80 40 08 00:00:00.818 READ FPDMA QUEUED 60 00 00 00 c0 00 00 73 70 6e 40 40 08 00:00:00.818 READ FPDMA QUEUED 60 00 00 00 80 00 00 73 70 6f 00 40 08 00:00:00.818 READ FPDMA QUEUED Error 3506 [1] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 04 58 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 06 40 00 00 5d 18 74 20 40 08 00:00:00.802 READ FPDMA QUEUED 60 00 00 06 40 00 00 5d 18 74 20 40 08 00:00:00.803 READ FPDMA QUEUED 60 00 00 03 20 00 00 5d 18 71 00 40 08 00:00:00.803 READ FPDMA QUEUED 60 00 00 00 68 00 00 5d 18 6f 88 40 08 00:00:00.803 READ FPDMA QUEUED 60 00 00 00 80 00 00 5d 18 6f 00 40 08 00:00:00.803 READ FPDMA QUEUED Error 3505 [0] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 04 58 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 06 40 00 00 5d 18 74 20 40 08 00:00:00.795 READ FPDMA QUEUED 60 00 00 06 40 00 00 5d 18 74 20 40 08 00:00:00.796 READ FPDMA QUEUED 60 00 00 03 20 00 00 5d 18 71 00 40 08 00:00:00.796 READ FPDMA QUEUED 60 00 00 00 20 00 00 5d 1a 7e 20 40 08 00:00:00.795 READ FPDMA QUEUED 60 00 00 00 20 00 00 5d 33 a4 40 40 08 00:00:00.795 READ FPDMA QUEUED Error 3504 [7] occurred at disk power-on lifetime: 29386 hours (1224 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 03 60 00 00 5d 18 76 08 40 00 Error: UNC at LBA = 0x5d187608 = 1561884168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 da 05 48 00 00 5d 18 74 20 40 08 00:00:00.764 READ FPDMA QUEUED 60 00 da 00 f8 00 00 5d 18 79 68 40 08 00:00:00.765 READ FPDMA QUEUED 60 00 da 05 48 00 00 5d 18 74 20 40 08 00:00:00.765 READ FPDMA QUEUED 60 00 00 03 20 00 00 5d 18 71 00 40 08 00:00:00.765 READ FPDMA QUEUED 60 00 00 00 20 00 00 5d 1b 21 e0 40 08 00:00:00.765 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 28158 1195769720 # 2 Short offline Completed: read failure 90% 28074 1195769720 # 3 Short offline Completed: read failure 90% 28058 1195769720 # 4 Short offline Completed: read failure 90% 28051 1195769720 SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 29/36 Celsius Lifetime Min/Max Temperature: 15/46 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (106) Index Estimated Time Temperature Celsius 107 2023-07-29 23:25 29 ********** 108 2023-07-29 23:30 28 ********* ... ..( 11 skipped). .. ********* 120 2023-07-30 00:30 28 ********* 121 2023-07-30 00:35 29 ********** ... ..( 9 skipped). .. ********** 3 2023-07-30 01:25 29 ********** 4 2023-07-30 01:30 27 ******** 5 2023-07-30 01:35 28 ********* 6 2023-07-30 01:40 29 ********** 7 2023-07-30 01:45 30 *********** ... ..( 10 skipped). .. *********** 18 2023-07-30 02:40 30 *********** 19 2023-07-30 02:45 31 ************ 20 2023-07-30 02:50 30 *********** 21 2023-07-30 02:55 30 *********** 22 2023-07-30 03:00 30 *********** 23 2023-07-30 03:05 31 ************ ... ..( 2 skipped). .. ************ 26 2023-07-30 03:20 31 ************ 27 2023-07-30 03:25 30 *********** 28 2023-07-30 03:30 30 *********** 29 2023-07-30 03:35 29 ********** 30 2023-07-30 03:40 30 *********** 31 2023-07-30 03:45 29 ********** 32 2023-07-30 03:50 29 ********** 33 2023-07-30 03:55 31 ************ 34 2023-07-30 04:00 30 *********** 35 2023-07-30 04:05 29 ********** ... ..( 4 skipped). .. ********** 40 2023-07-30 04:30 29 ********** 41 2023-07-30 04:35 28 ********* ... ..( 14 skipped). .. ********* 56 2023-07-30 05:50 28 ********* 57 2023-07-30 05:55 29 ********** ... ..( 20 skipped). .. ********** 78 2023-07-30 07:40 29 ********** 79 2023-07-30 07:45 28 ********* 80 2023-07-30 07:50 30 *********** 81 2023-07-30 07:55 30 *********** 82 2023-07-30 08:00 31 ************ ... ..( 5 skipped). .. ************ 88 2023-07-30 08:30 31 ************ 89 2023-07-30 08:35 32 ************* 90 2023-07-30 08:40 30 *********** 91 2023-07-30 08:45 29 ********** 92 2023-07-30 08:50 29 ********** 93 2023-07-30 08:55 30 *********** 94 2023-07-30 09:00 30 *********** 95 2023-07-30 09:05 29 ********** 96 2023-07-30 09:10 35 **************** 97 2023-07-30 09:15 32 ************* 98 2023-07-30 09:20 32 ************* 99 2023-07-30 09:25 35 **************** 100 2023-07-30 09:30 34 *************** 101 2023-07-30 09:35 33 ************** 102 2023-07-30 09:40 31 ************ 103 2023-07-30 09:45 30 *********** ... ..( 2 skipped). .. *********** 106 2023-07-30 10:00 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 27 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/ada1 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-STABLE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..52GSX Device Model: TOSHIBA MK1252GSX Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: LV011C User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Jul 30 10:01:20 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: Input/output error Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 48) minutes. SCT capabilities: (0x0033) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 050 - 0 2 Throughput_Performance POS--- 100 100 050 - 0 3 Spin_Up_Time PO---- 100 100 002 - 571 4 Start_Stop_Count -O--CK 100 100 000 - 12314 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 27 7 Seek_Error_Rate POSR-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 037 037 000 - 25209 10 Spin_Retry_Count PO--C- 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 8578 184 End-to-End_Error -O--CK 001 001 001 NOW 784 187 Reported_Uncorrect -O--CK 001 001 000 - 784 188 Command_Timeout -O--CK 100 001 000 - 602 189 High_Fly_Writes -O-RCK 100 100 001 - 0 190 Airflow_Temperature_Cel -O---K 068 046 045 - 32 (Min/Max 31/34) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 120 192 Power-Off_Retract_Count -O--CK 095 095 000 - 184355581 193 Load_Cycle_Count -O--CK 074 074 000 - 263175 194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 0/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 27 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 20 220 Disk_Shift -O---- 100 100 000 - 135 222 Loaded_Hours -O--CK 070 070 000 - 12304 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 350 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 1021 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1021 [252] occurred at disk power-on lifetime: 24850 hours (1035 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 00 00 00 02 08 09 ff 62 00 Error: ICRC, ABRT at LBA = 0x020809ff = 34081279 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 28 00 00 00 00 02 08 09 d8 40 00 4d+02:47:48.580 WRITE FPDMA QUEUED 60 00 20 00 00 00 00 09 fb 32 88 40 00 4d+02:47:48.560 READ FPDMA QUEUED 60 00 28 00 00 00 00 02 08 09 d8 40 00 4d+02:47:48.551 READ FPDMA QUEUED 60 00 08 00 00 00 00 01 ab 20 a8 40 00 4d+02:47:48.536 READ FPDMA QUEUED 60 00 08 00 00 00 00 00 a1 2c b8 40 00 4d+02:47:48.536 READ FPDMA QUEUED Error 1020 [251] occurred at disk power-on lifetime: 23823 hours (992 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 01 45 f1 f7 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0145f1f7 = 21361143 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 01 45 f1 78 e0 00 00:07:47.032 WRITE DMA EXT 35 00 00 00 80 00 00 01 45 de 90 e0 00 00:07:47.028 WRITE DMA EXT 35 00 00 00 80 00 00 01 45 d5 58 e0 00 00:07:47.024 WRITE DMA EXT 35 00 00 00 80 00 00 01 45 c9 68 e0 00 00:07:47.019 WRITE DMA EXT 35 00 00 00 80 00 00 01 45 c7 a8 e0 00 00:07:47.014 WRITE DMA EXT Error 1019 [250] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 07 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:18.105 READ DMA EXT ef 00 03 01 45 00 00 01 00 00 00 a0 00 00:00:18.046 SET FEATURES [Set transfer mode] ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:00:18.040 [VENDOR SPECIFIC] 25 00 00 00 20 00 00 00 00 00 00 e0 00 00:00:17.797 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:17.782 READ DMA EXT Error 1018 [249] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 1f e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000001f = 31 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 00 00 00 e0 00 00:00:17.797 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:17.782 READ DMA EXT 25 00 00 00 02 00 00 00 00 00 00 e0 00 00:00:17.768 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:16.172 READ DMA EXT 25 00 00 00 20 00 00 00 00 00 00 e0 00 00:00:15.851 READ DMA EXT Error 1017 [248] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 1f e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0000001f = 31 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 00 00 00 e0 00 00:00:15.851 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:00:15.826 READ DMA EXT 25 00 00 00 02 00 00 00 00 00 00 e0 00 00:00:15.813 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:14.381 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:14.115 READ DMA EXT Error 1016 [247] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 07 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:14.115 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:13.775 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:00:13.696 SET FEATURES [Set transfer mode] ec 03 00 45 00 00 00 00 00 00 00 a0 00 00:00:13.690 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:00:11.763 SET FEATURES [Set transfer mode] Error 1015 [246] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 07 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:13.775 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:00:13.696 SET FEATURES [Set transfer mode] ec 03 00 45 00 00 00 00 00 00 00 a0 00 00:00:13.690 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:00:11.763 SET FEATURES [Set transfer mode] ec 00 00 01 00 00 00 01 00 00 00 a0 00 00:00:11.757 IDENTIFY DEVICE Error 1014 [245] occurred at disk power-on lifetime: 23818 hours (992 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 07 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:07.981 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 00 e0 00 00:00:07.725 READ DMA EXT ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:00:07.644 SET FEATURES [Set transfer mode] ec 03 00 45 00 00 00 00 00 00 00 a0 00 00:00:07.638 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:00:01.810 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 19 - # 2 Short offline Completed without error 00% 19 - # 3 Short offline Completed without error 00% 11 - # 4 Short offline Completed without error 00% 10 - # 5 Short offline Completed without error 00% 10 - # 6 Short offline Completed without error 00% 10 - # 7 Short offline Completed without error 00% 9 - # 8 Short offline Completed without error 00% 9 - # 9 Short offline Completed without error 00% 8 - #10 Short offline Completed without error 00% 8 - #11 Short offline Completed without error 00% 8 - #12 Short offline Completed without error 00% 7 - #13 Short offline Completed without error 00% 7 - #14 Short offline Completed without error 00% 6 - #15 Short offline Completed without error 00% 6 - #16 Short offline Completed without error 00% 5 - #17 Short offline Completed without error 00% 5 - #18 Short offline Completed without error 00% 5 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 31/34 Celsius Lifetime Min/Max Temperature: 0/54 Celsius Under/Over Temperature Limit Count: 3/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (287) Index Estimated Time Temperature Celsius 288 2023-07-30 02:04 31 ************ ... ..( 17 skipped). .. ************ 306 2023-07-30 02:22 31 ************ 307 2023-07-30 02:23 30 *********** ... ..( 30 skipped). .. *********** 338 2023-07-30 02:54 30 *********** 339 2023-07-30 02:55 31 ************ 340 2023-07-30 02:56 31 ************ 341 2023-07-30 02:57 31 ************ 342 2023-07-30 02:58 30 *********** ... ..( 73 skipped). .. *********** 416 2023-07-30 04:12 30 *********** 417 2023-07-30 04:13 31 ************ 418 2023-07-30 04:14 31 ************ 419 2023-07-30 04:15 30 *********** ... ..( 13 skipped). .. *********** 433 2023-07-30 04:29 30 *********** 434 2023-07-30 04:30 31 ************ ... ..( 31 skipped). .. ************ 466 2023-07-30 05:02 31 ************ 467 2023-07-30 05:03 30 *********** 468 2023-07-30 05:04 31 ************ ... ..( 6 skipped). .. ************ 475 2023-07-30 05:11 31 ************ 476 2023-07-30 05:12 30 *********** 477 2023-07-30 05:13 30 *********** 0 2023-07-30 05:14 30 *********** 1 2023-07-30 05:15 29 ********** ... ..( 3 skipped). .. ********** 5 2023-07-30 05:19 29 ********** 6 2023-07-30 05:20 ? - 7 2023-07-30 05:21 29 ********** 8 2023-07-30 05:22 30 *********** 9 2023-07-30 05:23 31 ************ 10 2023-07-30 05:24 30 *********** ... ..( 2 skipped). .. *********** 13 2023-07-30 05:27 30 *********** 14 2023-07-30 05:28 ? - 15 2023-07-30 05:29 ? - 16 2023-07-30 05:30 ? - 17 2023-07-30 05:31 31 ************ 18 2023-07-30 05:32 32 ************* 19 2023-07-30 05:33 32 ************* 20 2023-07-30 05:34 32 ************* 21 2023-07-30 05:35 31 ************ 22 2023-07-30 05:36 ? - ... ..( 5 skipped). .. - 28 2023-07-30 05:42 ? - 29 2023-07-30 05:43 33 ************** 30 2023-07-30 05:44 34 *************** 31 2023-07-30 05:45 33 ************** 32 2023-07-30 05:46 33 ************** 33 2023-07-30 05:47 33 ************** 34 2023-07-30 05:48 ? - 35 2023-07-30 05:49 31 ************ 36 2023-07-30 05:50 32 ************* 37 2023-07-30 05:51 32 ************* 38 2023-07-30 05:52 32 ************* 39 2023-07-30 05:53 31 ************ ... ..( 4 skipped). .. ************ 44 2023-07-30 05:58 31 ************ 45 2023-07-30 05:59 30 *********** ... ..( 2 skipped). .. *********** 48 2023-07-30 06:02 30 *********** 49 2023-07-30 06:03 ? - 50 2023-07-30 06:04 31 ************ 51 2023-07-30 06:05 31 ************ 52 2023-07-30 06:06 ? - 53 2023-07-30 06:07 32 ************* 54 2023-07-30 06:08 32 ************* 55 2023-07-30 06:09 32 ************* 56 2023-07-30 06:10 ? - 57 2023-07-30 06:11 32 ************* 58 2023-07-30 06:12 32 ************* 59 2023-07-30 06:13 33 ************** 60 2023-07-30 06:14 32 ************* ... ..( 3 skipped). .. ************* 64 2023-07-30 06:18 32 ************* 65 2023-07-30 06:19 31 ************ 66 2023-07-30 06:20 31 ************ 67 2023-07-30 06:21 ? - 68 2023-07-30 06:22 32 ************* 69 2023-07-30 06:23 32 ************* 70 2023-07-30 06:24 33 ************** 71 2023-07-30 06:25 32 ************* 72 2023-07-30 06:26 32 ************* 73 2023-07-30 06:27 ? - 74 2023-07-30 06:28 32 ************* 75 2023-07-30 06:29 33 ************** 76 2023-07-30 06:30 33 ************** 77 2023-07-30 06:31 32 ************* ... ..( 3 skipped). .. ************* 81 2023-07-30 06:35 32 ************* 82 2023-07-30 06:36 ? - 83 2023-07-30 06:37 32 ************* 84 2023-07-30 06:38 33 ************** 85 2023-07-30 06:39 32 ************* ... ..( 3 skipped). .. ************* 89 2023-07-30 06:43 32 ************* 90 2023-07-30 06:44 31 ************ ... ..( 7 skipped). .. ************ 98 2023-07-30 06:52 31 ************ 99 2023-07-30 06:53 ? - 100 2023-07-30 06:54 32 ************* 101 2023-07-30 06:55 32 ************* 102 2023-07-30 06:56 ? - 103 2023-07-30 06:57 31 ************ 104 2023-07-30 06:58 32 ************* 105 2023-07-30 06:59 34 *************** 106 2023-07-30 07:00 33 ************** 107 2023-07-30 07:01 33 ************** 108 2023-07-30 07:02 32 ************* ... ..( 3 skipped). .. ************* 112 2023-07-30 07:06 32 ************* 113 2023-07-30 07:07 ? - 114 2023-07-30 07:08 26 ******* 115 2023-07-30 07:09 27 ******** 116 2023-07-30 07:10 28 ********* ... ..( 6 skipped). .. ********* 123 2023-07-30 07:17 28 ********* 124 2023-07-30 07:18 29 ********** 125 2023-07-30 07:19 29 ********** 126 2023-07-30 07:20 29 ********** 127 2023-07-30 07:21 30 *********** 128 2023-07-30 07:22 29 ********** ... ..( 7 skipped). .. ********** 136 2023-07-30 07:30 29 ********** 137 2023-07-30 07:31 30 *********** ... ..( 8 skipped). .. *********** 146 2023-07-30 07:40 30 *********** 147 2023-07-30 07:41 31 ************ 148 2023-07-30 07:42 30 *********** ... ..( 7 skipped). .. *********** 156 2023-07-30 07:50 30 *********** 157 2023-07-30 07:51 31 ************ 158 2023-07-30 07:52 31 ************ 159 2023-07-30 07:53 30 *********** ... ..( 6 skipped). .. *********** 166 2023-07-30 08:00 30 *********** 167 2023-07-30 08:01 ? - 168 2023-07-30 08:02 31 ************ 169 2023-07-30 08:03 32 ************* ... ..( 2 skipped). .. ************* 172 2023-07-30 08:06 32 ************* 173 2023-07-30 08:07 31 ************ ... ..( 14 skipped). .. ************ 188 2023-07-30 08:22 31 ************ 189 2023-07-30 08:23 ? - 190 2023-07-30 08:24 31 ************ 191 2023-07-30 08:25 32 ************* 192 2023-07-30 08:26 32 ************* 193 2023-07-30 08:27 ? - 194 2023-07-30 08:28 ? - 195 2023-07-30 08:29 ? - 196 2023-07-30 08:30 31 ************ 197 2023-07-30 08:31 30 *********** ... ..( 3 skipped). .. *********** 201 2023-07-30 08:35 30 *********** 202 2023-07-30 08:36 29 ********** ... ..( 5 skipped). .. ********** 208 2023-07-30 08:42 29 ********** 209 2023-07-30 08:43 ? - ... ..( 2 skipped). .. - 212 2023-07-30 08:46 ? - 213 2023-07-30 08:47 30 *********** 214 2023-07-30 08:48 31 ************ 215 2023-07-30 08:49 31 ************ 216 2023-07-30 08:50 ? - 217 2023-07-30 08:51 32 ************* ... ..( 3 skipped). .. ************* 221 2023-07-30 08:55 32 ************* 222 2023-07-30 08:56 31 ************ ... ..( 4 skipped). .. ************ 227 2023-07-30 09:01 31 ************ 228 2023-07-30 09:02 ? - 229 2023-07-30 09:03 31 ************ 230 2023-07-30 09:04 32 ************* 231 2023-07-30 09:05 32 ************* 232 2023-07-30 09:06 32 ************* 233 2023-07-30 09:07 34 *************** 234 2023-07-30 09:08 33 ************** ... ..( 2 skipped). .. ************** 237 2023-07-30 09:11 33 ************** 238 2023-07-30 09:12 32 ************* ... ..( 18 skipped). .. ************* 257 2023-07-30 09:31 32 ************* 258 2023-07-30 09:32 31 ************ ... ..( 5 skipped). .. ************ 264 2023-07-30 09:38 31 ************ 265 2023-07-30 09:39 32 ************* ... ..( 21 skipped). .. ************* 287 2023-07-30 10:01 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC