/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD3200BPVT-22JJ5T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Jan 3 12:34:06 2023 SAST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7080) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 73) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 139 136 021 - 2050 4 Start_Stop_Count -O--CK 077 077 000 - 23675 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 4328 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2782 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1717 192 Power-Off_Retract_Count -O--CK 200 200 000 - 94 193 Load_Cycle_Count -O--CK 001 001 000 - 604423 194 Temperature_Celsius -O---K 111 095 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 28/33 Celsius Lifetime Min/Max Temperature: 0/48 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (31) Index Estimated Time Temperature Celsius 32 2023-01-03 10:27 ? - 33 2023-01-03 10:28 31 ************ 34 2023-01-03 10:29 31 ************ 35 2023-01-03 10:30 ? - 36 2023-01-03 10:31 31 ************ 37 2023-01-03 10:32 31 ************ 38 2023-01-03 10:33 31 ************ 39 2023-01-03 10:34 ? - 40 2023-01-03 10:35 31 ************ 41 2023-01-03 10:36 31 ************ 42 2023-01-03 10:37 ? - 43 2023-01-03 10:38 31 ************ 44 2023-01-03 10:39 31 ************ 45 2023-01-03 10:40 ? - 46 2023-01-03 10:41 31 ************ 47 2023-01-03 10:42 31 ************ 48 2023-01-03 10:43 31 ************ 49 2023-01-03 10:44 ? - 50 2023-01-03 10:45 31 ************ 51 2023-01-03 10:46 31 ************ 52 2023-01-03 10:47 31 ************ 53 2023-01-03 10:48 ? - 54 2023-01-03 10:49 31 ************ 55 2023-01-03 10:50 31 ************ 56 2023-01-03 10:51 ? - 57 2023-01-03 10:52 31 ************ 58 2023-01-03 10:53 31 ************ 59 2023-01-03 10:54 ? - 60 2023-01-03 10:55 31 ************ 61 2023-01-03 10:56 31 ************ 62 2023-01-03 10:57 31 ************ 63 2023-01-03 10:58 ? - 64 2023-01-03 10:59 31 ************ 65 2023-01-03 11:00 31 ************ 66 2023-01-03 11:01 ? - 67 2023-01-03 11:02 31 ************ 68 2023-01-03 11:03 31 ************ 69 2023-01-03 11:04 ? - 70 2023-01-03 11:05 31 ************ 71 2023-01-03 11:06 ? - 72 2023-01-03 11:07 31 ************ ... ..( 2 skipped). .. ************ 75 2023-01-03 11:10 31 ************ 76 2023-01-03 11:11 ? - 77 2023-01-03 11:12 31 ************ ... ..( 11 skipped). .. ************ 89 2023-01-03 11:24 31 ************ 90 2023-01-03 11:25 32 ************* ... ..( 49 skipped). .. ************* 12 2023-01-03 12:15 32 ************* 13 2023-01-03 12:16 33 ************** ... ..( 5 skipped). .. ************** 19 2023-01-03 12:22 33 ************** 20 2023-01-03 12:23 ? - 21 2023-01-03 12:24 32 ************* ... ..( 2 skipped). .. ************* 24 2023-01-03 12:27 32 ************* 25 2023-01-03 12:28 33 ************** 26 2023-01-03 12:29 33 ************** 27 2023-01-03 12:30 33 ************** 28 2023-01-03 12:31 32 ************* ... ..( 2 skipped). .. ************* 31 2023-01-03 12:34 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 21657 Vendor specific