/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD3200LPVX-08V0TT5 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 05.01A05 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Oct 20 02:07:53 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 74) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 155 151 021 - 1250 4 Start_Stop_Count -O--CK 001 001 000 - 224810 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 064 064 000 - 26584 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 563 192 Power-Off_Retract_Count -O--CK 200 200 000 - 38 193 Load_Cycle_Count -O--CK 001 001 000 - 809395 194 Temperature_Celsius -O---K 102 090 000 - 41 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 066 066 000 - 24827 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Stand-by (1) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 26/41 Celsius Lifetime Min/Max Temperature: 19/53 Celsius Specified Max Operating Temperature: 30 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (40) Index Estimated Time Temperature Celsius 41 2024-10-20 00:00 29 ********** 42 2024-10-20 00:01 30 *********** 43 2024-10-20 00:02 31 ************ 44 2024-10-20 00:03 31 ************ 45 2024-10-20 00:04 32 ************* 46 2024-10-20 00:05 33 ************** 47 2024-10-20 00:06 34 *************** 48 2024-10-20 00:07 35 **************** 49 2024-10-20 00:08 35 **************** 50 2024-10-20 00:09 ? - 51 2024-10-20 00:10 26 ******* 52 2024-10-20 00:11 27 ******** 53 2024-10-20 00:12 28 ********* 54 2024-10-20 00:13 ? - 55 2024-10-20 00:14 28 ********* 56 2024-10-20 00:15 ? - 57 2024-10-20 00:16 28 ********* 58 2024-10-20 00:17 28 ********* 59 2024-10-20 00:18 29 ********** 60 2024-10-20 00:19 30 *********** 61 2024-10-20 00:20 30 *********** 62 2024-10-20 00:21 31 ************ 63 2024-10-20 00:22 31 ************ 64 2024-10-20 00:23 32 ************* 65 2024-10-20 00:24 32 ************* 66 2024-10-20 00:25 33 ************** 67 2024-10-20 00:26 33 ************** 68 2024-10-20 00:27 34 *************** 69 2024-10-20 00:28 34 *************** 70 2024-10-20 00:29 35 **************** 71 2024-10-20 00:30 35 **************** 72 2024-10-20 00:31 36 ***************** ... ..( 3 skipped). .. ***************** 76 2024-10-20 00:35 36 ***************** 77 2024-10-20 00:36 37 ****************** 78 2024-10-20 00:37 37 ****************** 79 2024-10-20 00:38 37 ****************** 80 2024-10-20 00:39 38 ******************* 81 2024-10-20 00:40 38 ******************* 82 2024-10-20 00:41 38 ******************* 83 2024-10-20 00:42 39 ******************** ... ..( 2 skipped). .. ******************** 86 2024-10-20 00:45 39 ******************** 87 2024-10-20 00:46 40 ********************* ... ..( 4 skipped). .. ********************* 92 2024-10-20 00:51 40 ********************* 93 2024-10-20 00:52 41 ********************** ... ..( 74 skipped). .. ********************** 40 2024-10-20 02:07 41 ********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 6829 Vendor specific