/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST3120026AS Serial Number: -- Firmware Version: 3.18 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Sep 26 12:07:46 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 058 051 006 - 42085316 3 Spin_Up_Time PO---- 096 096 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2067 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 291022942 9 Power_On_Hours -O--CK 033 033 000 - 59418 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1288 194 Temperature_Celsius -O---K 039 059 000 - 39 195 Hardware_ECC_Recovered -O-RC- 058 051 000 - 42085316 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 199 000 - 5 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x20 SL R/O 1 Streaming performance log 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 5 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 occurred at disk power-on lifetime: 35958 hours (1498 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 c4 c4 2b 02 e0 Error: UNC 196 sectors at LBA = 0x00022bc4 = 142276 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 2b 02 e0 00 00:04:11.975 READ DMA c8 00 00 00 2a 02 e0 00 00:04:11.973 READ DMA c8 00 00 00 29 02 e0 00 00:04:11.971 READ DMA c8 00 00 00 28 02 e0 00 00:04:11.970 READ DMA c8 00 00 00 27 02 e0 00 00:04:11.967 READ DMA Error 4 occurred at disk power-on lifetime: 5367 hours (223 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 44 50 35 e0 Error: UNC 6 sectors at LBA = 0x00355044 = 3493956 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 42 3e 50 35 e0 00 20:26:58.673 READ DMA EXT 25 00 42 3e 50 35 e0 00 20:26:58.672 READ DMA EXT 25 00 3e 80 73 2d e0 00 20:26:58.671 READ DMA EXT e7 00 00 00 00 00 e0 00 20:26:58.662 FLUSH CACHE 35 00 08 67 57 13 e0 00 20:26:58.661 WRITE DMA EXT Error 3 occurred at disk power-on lifetime: 5367 hours (223 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 44 50 35 e0 Error: UNC 6 sectors at LBA = 0x00355044 = 3493956 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 42 3e 50 35 e0 00 20:26:58.673 READ DMA EXT 25 00 3e 80 73 2d e0 00 20:26:58.672 READ DMA EXT e7 00 00 00 00 00 e0 00 20:26:58.671 FLUSH CACHE 35 00 08 67 57 13 e0 00 20:26:58.662 WRITE DMA EXT e7 00 00 20 4d 45 e0 00 20:26:58.661 FLUSH CACHE Error 2 occurred at disk power-on lifetime: 5367 hours (223 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 44 50 35 e0 Error: UNC 6 sectors at LBA = 0x00355044 = 3493956 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 42 3e 50 35 e0 00 20:25:36.347 READ DMA EXT 25 00 42 3e 50 35 e0 00 20:25:36.339 READ DMA EXT 35 00 61 1f 92 9d e0 00 20:25:36.330 WRITE DMA EXT 25 00 61 1f 92 9d e0 00 20:25:36.329 READ DMA EXT 35 00 80 00 92 9d e0 00 20:25:36.314 WRITE DMA EXT Error 1 occurred at disk power-on lifetime: 5367 hours (223 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 44 50 35 e0 Error: UNC 6 sectors at LBA = 0x00355044 = 3493956 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 42 3e 50 35 e0 00 20:25:36.347 READ DMA EXT 35 00 61 1f 92 9d e0 00 20:25:36.339 WRITE DMA EXT 25 00 61 1f 92 9d e0 00 20:25:36.330 READ DMA EXT 35 00 80 00 92 9d e0 00 20:25:36.329 WRITE DMA EXT 25 00 80 00 92 9d e0 00 20:25:36.314 READ DMA EXT SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 59371 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/ada1 smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p4 amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST3120026AS Serial Number: -- Firmware Version: 3.18 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5528 ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Sep 26 12:07:46 2024 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 068 050 006 - 241218222 3 Spin_Up_Time PO---- 097 096 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 2 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 28 7 Seek_Error_Rate POSR-- 084 060 030 - 4586828452 9 Power_On_Hours -O--CK 075 075 000 - 22252 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 247 194 Temperature_Celsius -O---K 041 054 000 - 41 195 Hardware_ECC_Recovered -O-RC- 068 050 000 - 241218222 197 Current_Pending_Sector -O--C- 100 100 000 - 43 198 Offline_Uncorrectable ----C- 100 100 000 - 43 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 098 251 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x20 SL R/O 1 Streaming performance log 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 669 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 669 occurred at disk power-on lifetime: 22005 hours (916 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 a4 04 0c 40 Error: UNC at LBA = 0x000c04a4 = 787620 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 a4 04 0c 40 00 17:22:56.787 READ DMA c8 03 01 a3 04 0c 40 00 17:23:30.168 READ DMA c8 03 01 a2 04 0c 40 00 17:23:30.167 READ DMA ef 03 46 01 00 00 00 00 17:23:30.154 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 00 00 17:23:30.143 IDENTIFY DEVICE Error 668 occurred at disk power-on lifetime: 22004 hours (916 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 a1 04 0c 40 Error: UNC at LBA = 0x000c04a1 = 787617 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 a1 04 0c 40 00 17:21:53.866 READ DMA c8 03 01 a0 04 0c 40 00 17:21:53.866 READ DMA c8 03 01 9f 04 0c 40 00 17:21:53.866 READ DMA c8 03 01 9e 04 0c 40 00 17:21:53.866 READ DMA c8 03 01 9d 04 0c 40 00 17:21:53.866 READ DMA Error 667 occurred at disk power-on lifetime: 22004 hours (916 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 21 a1 04 0c 40 Error: UNC 33 sectors at LBA = 0x000c04a1 = 787617 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 40 80 04 0c 40 00 17:20:14.385 READ DMA c8 03 40 c0 50 07 40 00 17:20:14.332 READ DMA c8 03 40 40 41 07 40 00 17:20:14.330 READ DMA c8 03 40 c0 1e 30 40 00 17:20:14.315 READ DMA c8 03 40 c0 ec 10 40 00 17:20:14.314 READ DMA Error 666 occurred at disk power-on lifetime: 22004 hours (916 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 cd ff 02 40 Error: UNC at LBA = 0x0002ffcd = 196557 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 cd ff 02 40 00 17:13:01.967 READ DMA ef 03 46 01 00 00 00 00 17:13:01.738 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 00 00 17:13:01.225 IDENTIFY DEVICE 00 00 01 00 00 00 00 ff 17:13:00.996 NOP [Abort queued commands] 00 00 01 00 00 00 00 ff 17:12:30.483 NOP [Abort queued commands] Error 665 occurred at disk power-on lifetime: 22004 hours (916 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 cc ff 02 40 Error: UNC at LBA = 0x0002ffcc = 196556 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 01 cc ff 02 40 00 17:10:53.990 READ DMA c8 03 01 cb ff 02 40 00 17:10:53.761 READ DMA ef 03 46 01 00 00 00 00 17:10:53.247 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 00 00 17:10:53.019 IDENTIFY DEVICE 00 00 46 00 00 00 00 ff 17:11:26.300 NOP [Abort queued commands] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported