/dev/ada0 smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-STABLE amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EZRX-19D8PB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 81.00A81 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Dec 31 02:34:20 2023 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (28860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 291) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 4357 3 Spin_Up_Time POS--K 171 166 021 - 4450 4 Start_Stop_Count -O--CK 094 094 000 - 6972 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 061 061 000 - 28755 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6598 192 Power-Off_Retract_Count -O--CK 199 199 000 - 824 193 Load_Cycle_Count -O--CK 001 001 000 - 1380600 194 Temperature_Celsius -O---K 115 095 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 16 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 16 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2462 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2462 [13] occurred at disk power-on lifetime: 14655 hours (610 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 43 40 40 00 Error: UNC at LBA = 0x00114340 = 1131328 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 04 00 00 30 00 00 00 11 41 68 40 00 02:01:50.923 READ FPDMA QUEUED 61 00 30 00 28 00 00 00 9c cf 40 40 00 02:01:50.908 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 02:01:50.861 READ LOG EXT 60 00 20 00 20 00 00 00 11 43 40 40 00 02:01:47.362 READ FPDMA QUEUED 61 00 20 00 18 00 00 11 37 cc 60 40 00 02:01:47.362 WRITE FPDMA QUEUED Error 2461 [12] occurred at disk power-on lifetime: 14655 hours (610 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 43 40 40 00 Error: UNC at LBA = 0x00114340 = 1131328 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 20 00 00 00 11 43 40 40 00 02:01:47.362 READ FPDMA QUEUED 61 00 20 00 18 00 00 11 37 cc 60 40 00 02:01:47.362 WRITE FPDMA QUEUED 60 00 20 00 10 00 00 00 11 43 20 40 00 02:01:47.361 READ FPDMA QUEUED 61 00 20 00 08 00 00 11 37 cc 40 40 00 02:01:47.361 WRITE FPDMA QUEUED 60 00 20 00 00 00 00 00 11 43 00 40 00 02:01:47.361 READ FPDMA QUEUED Error 2460 [11] occurred at disk power-on lifetime: 14653 hours (610 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 47 00 40 00 Error: UNC at LBA = 0x00114700 = 1132288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 98 00 00 06 7f 0c 82 40 00 00:50:17.446 READ FPDMA QUEUED 60 00 38 00 90 00 00 03 18 d3 30 40 00 00:50:17.446 READ FPDMA QUEUED 60 00 0c 00 88 00 00 02 2b 59 68 40 00 00:50:17.446 READ FPDMA QUEUED 60 00 38 00 80 00 00 01 66 b5 80 40 00 00:50:17.446 READ FPDMA QUEUED 61 00 08 00 78 00 00 00 14 27 58 40 00 00:50:17.446 WRITE FPDMA QUEUED Error 2459 [10] occurred at disk power-on lifetime: 14653 hours (610 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 43 40 40 00 Error: UNC at LBA = 0x00114340 = 1131328 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 04 00 00 70 00 00 00 11 45 68 40 00 00:50:13.890 READ FPDMA QUEUED 60 04 00 00 68 00 00 00 11 41 68 40 00 00:50:13.886 READ FPDMA QUEUED 60 00 30 00 60 00 00 01 56 a1 f8 40 00 00:50:13.871 READ FPDMA QUEUED 60 00 40 00 58 00 00 03 18 d3 b0 40 00 00:50:13.871 READ FPDMA QUEUED 60 00 40 00 50 00 00 06 7f 0c 42 40 00 00:50:13.871 READ FPDMA QUEUED Error 2458 [9] occurred at disk power-on lifetime: 14653 hours (610 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 11 43 40 40 00 Error: UNC at LBA = 0x00114340 = 1131328 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 38 00 00 00 11 43 40 40 00 00:50:10.318 READ FPDMA QUEUED 61 00 20 00 30 00 00 00 75 77 c0 40 00 00:50:10.318 WRITE FPDMA QUEUED 60 00 20 00 28 00 00 00 11 43 20 40 00 00:50:10.318 READ FPDMA QUEUED 61 00 20 00 20 00 00 00 75 77 a0 40 00 00:50:10.318 WRITE FPDMA QUEUED 60 00 20 00 18 00 00 00 11 43 00 40 00 00:50:10.318 READ FPDMA QUEUED Error 2457 [8] occurred at disk power-on lifetime: 14635 hours (609 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 47 00 40 00 Error: UNC at LBA = 0x00114700 = 1132288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 04 00 00 08 00 00 00 11 45 68 40 00 06:42:54.672 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 06:42:54.632 READ LOG EXT 60 04 00 00 00 00 00 00 11 41 68 40 00 06:42:51.138 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 06:42:51.067 READ LOG EXT 60 00 20 00 f8 00 00 00 11 43 40 40 00 06:42:47.571 READ FPDMA QUEUED Error 2456 [7] occurred at disk power-on lifetime: 14635 hours (609 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 43 40 40 00 Error: UNC at LBA = 0x00114340 = 1131328 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 04 00 00 00 00 00 00 11 41 68 40 00 06:42:51.138 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 68 00 06:42:51.067 READ LOG EXT 60 00 20 00 f8 00 00 00 11 43 40 40 00 06:42:47.571 READ FPDMA QUEUED 61 00 20 00 f0 00 00 12 96 b4 a0 40 00 06:42:47.571 WRITE FPDMA QUEUED 60 00 20 00 e8 00 00 00 11 43 20 40 00 06:42:47.570 READ FPDMA QUEUED Error 2455 [6] occurred at disk power-on lifetime: 14635 hours (609 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 11 43 40 40 00 Error: UNC at LBA = 0x00114340 = 1131328 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 f8 00 00 00 11 43 40 40 00 06:42:47.571 READ FPDMA QUEUED 61 00 20 00 f0 00 00 12 96 b4 a0 40 00 06:42:47.571 WRITE FPDMA QUEUED 60 00 20 00 e8 00 00 00 11 43 20 40 00 06:42:47.570 READ FPDMA QUEUED 61 00 20 00 e0 00 00 12 96 b4 80 40 00 06:42:47.570 WRITE FPDMA QUEUED 60 00 20 00 d8 00 00 00 11 43 00 40 00 06:42:47.570 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 50% 23772 1041000 # 2 Short offline Completed: read failure 60% 21230 1041000 # 3 Short offline Completed: read failure 50% 21205 1041000 # 4 Short offline Completed: read failure 60% 20932 1041000 # 5 Short offline Completed: read failure 20% 20928 1131328 # 6 Short offline Completed: read failure 20% 20921 1041000 # 7 Extended offline Completed: read failure 90% 20916 1131328 # 8 Short offline Completed: read failure 60% 20907 1041000 # 9 Short offline Completed: read failure 60% 20899 1041000 #10 Short offline Completed: read failure 60% 20895 1041000 #11 Short offline Completed: read failure 90% 20893 1131328 #12 Short offline Completed: read failure 50% 20892 1041000 #13 Short offline Completed: read failure 50% 20886 1041000 #14 Short offline Completed: read failure 60% 20882 1041000 #15 Short offline Completed: read failure 40% 20876 1041000 #16 Short offline Completed: read failure 50% 20871 1041000 #17 Short offline Completed: read failure 60% 20866 1041000 #18 Short offline Completed: read failure 60% 20862 1041000 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 23/33 Celsius Lifetime Min/Max Temperature: 2/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (229) Index Estimated Time Temperature Celsius 230 2023-12-30 18:37 32 ************* ... ..( 58 skipped). .. ************* 289 2023-12-30 19:36 32 ************* 290 2023-12-30 19:37 33 ************** ... ..( 76 skipped). .. ************** 367 2023-12-30 20:54 33 ************** 368 2023-12-30 20:55 32 ************* ... ..(128 skipped). .. ************* 19 2023-12-30 23:04 32 ************* 20 2023-12-30 23:05 33 ************** ... ..( 25 skipped). .. ************** 46 2023-12-30 23:31 33 ************** 47 2023-12-30 23:32 32 ************* 48 2023-12-30 23:33 32 ************* 49 2023-12-30 23:34 32 ************* 50 2023-12-30 23:35 33 ************** ... ..( 19 skipped). .. ************** 70 2023-12-30 23:55 33 ************** 71 2023-12-30 23:56 32 ************* ... ..( 7 skipped). .. ************* 79 2023-12-31 00:04 32 ************* 80 2023-12-31 00:05 33 ************** ... ..( 5 skipped). .. ************** 86 2023-12-31 00:11 33 ************** 87 2023-12-31 00:12 32 ************* ... ..( 7 skipped). .. ************* 95 2023-12-31 00:20 32 ************* 96 2023-12-31 00:21 31 ************ ... ..( 50 skipped). .. ************ 147 2023-12-31 01:12 31 ************ 148 2023-12-31 01:13 32 ************* 149 2023-12-31 01:14 32 ************* 150 2023-12-31 01:15 31 ************ ... ..( 14 skipped). .. ************ 165 2023-12-31 01:30 31 ************ 166 2023-12-31 01:31 32 ************* ... ..( 6 skipped). .. ************* 173 2023-12-31 01:38 32 ************* 174 2023-12-31 01:39 31 ************ 175 2023-12-31 01:40 32 ************* ... ..( 41 skipped). .. ************* 217 2023-12-31 02:22 32 ************* 218 2023-12-31 02:23 33 ************** ... ..( 3 skipped). .. ************** 222 2023-12-31 02:27 33 ************** 223 2023-12-31 02:28 32 ************* ... ..( 2 skipped). .. ************* 226 2023-12-31 02:31 32 ************* 227 2023-12-31 02:32 33 ************** 228 2023-12-31 02:33 32 ************* 229 2023-12-31 02:34 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 18 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 43448 Vendor specific