/dev/wd0 smartctl 7.4 2023-08-01 r5530 [OpenBSD 7.5 macppc] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Kingchuxing 64GB Serial Number: -- Firmware Version: W0222A0 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 3.0 Gb/s Local Time is: Mon Jul 8 20:30:41 2024 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 95 12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 127 160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0 161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100 163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 10 164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3086 165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 22 166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5 167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 12 168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5050 169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100 175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0 177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 82 194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 40 195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0 198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0 232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100 241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 5645 242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 2125 245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5412 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported The above only provides legacy SMART information - try 'smartctl -x' for more