/dev/ada0 smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p7 amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00BBHA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu May 25 10:02:52 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10440) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 109) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 181 176 021 - 1941 4 Start_Stop_Count -O--CK 100 100 000 - 37 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3368 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 37 192 Power-Off_Retract_Count -O--CK 200 200 000 - 27 193 Load_Cycle_Count -O--CK 200 200 000 - 421 194 Temperature_Celsius -O---K 114 110 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 28/29 Celsius Lifetime Min/Max Temperature: 21/33 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (234) Index Estimated Time Temperature Celsius 235 2023-05-25 02:05 29 ********** ... ..( 9 skipped). .. ********** 245 2023-05-25 02:15 29 ********** 246 2023-05-25 02:16 28 ********* ... ..( 9 skipped). .. ********* 256 2023-05-25 02:26 28 ********* 257 2023-05-25 02:27 27 ******** 258 2023-05-25 02:28 ? - 259 2023-05-25 02:29 27 ******** 260 2023-05-25 02:30 ? - 261 2023-05-25 02:31 28 ********* 262 2023-05-25 02:32 ? - 263 2023-05-25 02:33 28 ********* 264 2023-05-25 02:34 ? - 265 2023-05-25 02:35 28 ********* 266 2023-05-25 02:36 ? - 267 2023-05-25 02:37 28 ********* 268 2023-05-25 02:38 ? - 269 2023-05-25 02:39 28 ********* ... ..( 5 skipped). .. ********* 275 2023-05-25 02:45 28 ********* 276 2023-05-25 02:46 29 ********** 277 2023-05-25 02:47 29 ********** 278 2023-05-25 02:48 ? - 279 2023-05-25 02:49 29 ********** ... ..( 10 skipped). .. ********** 290 2023-05-25 03:00 29 ********** 291 2023-05-25 03:01 28 ********* ... ..( 16 skipped). .. ********* 308 2023-05-25 03:18 28 ********* 309 2023-05-25 03:19 29 ********** ... ..( 74 skipped). .. ********** 384 2023-05-25 04:34 29 ********** 385 2023-05-25 04:35 28 ********* ... ..( 17 skipped). .. ********* 403 2023-05-25 04:53 28 ********* 404 2023-05-25 04:54 29 ********** ... ..( 18 skipped). .. ********** 423 2023-05-25 05:13 29 ********** 424 2023-05-25 05:14 28 ********* ... ..( 41 skipped). .. ********* 466 2023-05-25 05:56 28 ********* 467 2023-05-25 05:57 29 ********** ... ..( 25 skipped). .. ********** 15 2023-05-25 06:23 29 ********** 16 2023-05-25 06:24 28 ********* ... ..( 11 skipped). .. ********* 28 2023-05-25 06:36 28 ********* 29 2023-05-25 06:37 29 ********** ... ..( 19 skipped). .. ********** 49 2023-05-25 06:57 29 ********** 50 2023-05-25 06:58 28 ********* ... ..( 30 skipped). .. ********* 81 2023-05-25 07:29 28 ********* 82 2023-05-25 07:30 27 ******** ... ..( 6 skipped). .. ******** 89 2023-05-25 07:37 27 ******** 90 2023-05-25 07:38 28 ********* 91 2023-05-25 07:39 27 ******** 92 2023-05-25 07:40 27 ******** 93 2023-05-25 07:41 27 ******** 94 2023-05-25 07:42 28 ********* ... ..( 11 skipped). .. ********* 106 2023-05-25 07:54 28 ********* 107 2023-05-25 07:55 29 ********** ... ..( 39 skipped). .. ********** 147 2023-05-25 08:35 29 ********** 148 2023-05-25 08:36 28 ********* ... ..( 16 skipped). .. ********* 165 2023-05-25 08:53 28 ********* 166 2023-05-25 08:54 29 ********** ... ..( 17 skipped). .. ********** 184 2023-05-25 09:12 29 ********** 185 2023-05-25 09:13 28 ********* ... ..( 34 skipped). .. ********* 220 2023-05-25 09:48 28 ********* 221 2023-05-25 09:49 29 ********** ... ..( 12 skipped). .. ********** 234 2023-05-25 10:02 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 45 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 46 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7075 Vendor specific