/dev/ada0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD10EFRX-68FYTN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Feb 26 07:59:17 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14280) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 163) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 137 136 021 - 4116 4 Start_Stop_Count -O--CK 100 100 000 - 176 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 089 089 000 - 8718 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 173 192 Power-Off_Retract_Count -O--CK 200 200 000 - 103 193 Load_Cycle_Count -O--CK 197 197 000 - 11656 194 Temperature_Celsius -O---K 114 093 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 29/29 Celsius Lifetime Min/Max Temperature: 16/50 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (85) Index Estimated Time Temperature Celsius 86 2021-02-26 00:02 29 ********** ... ..(334 skipped). .. ********** 421 2021-02-26 05:37 29 ********** 422 2021-02-26 05:38 28 ********* 423 2021-02-26 05:39 ? - 424 2021-02-26 05:40 29 ********** ... ..( 10 skipped). .. ********** 435 2021-02-26 05:51 29 ********** 436 2021-02-26 05:52 30 *********** ... ..( 3 skipped). .. *********** 440 2021-02-26 05:56 30 *********** 441 2021-02-26 05:57 29 ********** ... ..(121 skipped). .. ********** 85 2021-02-26 07:59 29 ********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 707 Vendor specific /dev/ada1 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron MX500 SSDs Device Model: CT500MX500SSD4 Serial Number: -- LU WWN Device Id: 5 00a075 ... Firmware Version: M3CR023 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Feb 26 07:59:17 2021 EST ==> WARNING: This firmware returns bogus raw values in attribute 197 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 6016 12 Power_Cycle_Count -O--CK 100 100 000 - 182 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Ave_Block-Erase_Count -O--CK 100 100 000 - 4 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 103 180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 44 183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 184 Error_Correction_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 055 015 000 - 45 (Min/Max 0/85) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Bogus_Current_Pend_Sect -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 206 Write_Error_Rate -OSR-- 100 100 000 - 0 210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 246 Total_LBAs_Written -O--CK 100 100 000 - 2011441340 247 Host_Program_Page_Count -O--CK 100 100 000 - 32789833 248 FTL_Program_Page_Count -O--CK 100 100 000 - 4303696 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Completed [00% left] (0-65535) Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: 36/45 Celsius Lifetime Min/Max Temperature: 0/85 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (103) Index Estimated Time Temperature Celsius 104 2021-02-26 05:52 48 ***************************** 105 2021-02-26 05:53 45 ************************** 106 2021-02-26 05:54 46 *************************** ... ..( 2 skipped). .. *************************** 109 2021-02-26 05:57 46 *************************** 110 2021-02-26 05:58 45 ************************** ... ..( 2 skipped). .. ************************** 113 2021-02-26 06:01 45 ************************** 114 2021-02-26 06:02 46 *************************** 115 2021-02-26 06:03 46 *************************** 116 2021-02-26 06:04 46 *************************** 117 2021-02-26 06:05 45 ************************** ... ..( 4 skipped). .. ************************** 122 2021-02-26 06:10 45 ************************** 123 2021-02-26 06:11 46 *************************** 124 2021-02-26 06:12 45 ************************** 125 2021-02-26 06:13 46 *************************** 126 2021-02-26 06:14 45 ************************** 127 2021-02-26 06:15 46 *************************** 0 2021-02-26 06:16 46 *************************** 1 2021-02-26 06:17 46 *************************** 2 2021-02-26 06:18 45 ************************** 3 2021-02-26 06:19 46 *************************** 4 2021-02-26 06:20 46 *************************** 5 2021-02-26 06:21 45 ************************** 6 2021-02-26 06:22 46 *************************** 7 2021-02-26 06:23 ? - 8 2021-02-26 06:24 ? - 9 2021-02-26 06:25 33 ************** 10 2021-02-26 06:26 43 ************************ 11 2021-02-26 06:27 ? - 12 2021-02-26 06:28 45 ************************** 13 2021-02-26 06:29 ? - 14 2021-02-26 06:30 ? - 15 2021-02-26 06:31 45 ************************** 16 2021-02-26 06:32 46 *************************** 17 2021-02-26 06:33 50 ******************************* 18 2021-02-26 06:34 ? - 19 2021-02-26 06:35 ? - 20 2021-02-26 06:36 45 ************************** 21 2021-02-26 06:37 46 *************************** 22 2021-02-26 06:38 46 *************************** 23 2021-02-26 06:39 46 *************************** 24 2021-02-26 06:40 48 ***************************** 25 2021-02-26 06:41 ? - 26 2021-02-26 06:42 ? - 27 2021-02-26 06:43 43 ************************ 28 2021-02-26 06:44 43 ************************ 29 2021-02-26 06:45 ? - 30 2021-02-26 06:46 ? - 31 2021-02-26 06:47 33 ************** 32 2021-02-26 06:48 36 ***************** 33 2021-02-26 06:49 36 ***************** 34 2021-02-26 06:50 40 ********************* 35 2021-02-26 06:51 43 ************************ 36 2021-02-26 06:52 ? - 37 2021-02-26 06:53 ? - 38 2021-02-26 06:54 45 ************************** 39 2021-02-26 06:55 45 ************************** 40 2021-02-26 06:56 ? - 41 2021-02-26 06:57 46 *************************** 42 2021-02-26 06:58 46 *************************** 43 2021-02-26 06:59 55 ************************************ 44 2021-02-26 07:00 58 *************************************** 45 2021-02-26 07:01 51 ******************************** 46 2021-02-26 07:02 48 ***************************** 47 2021-02-26 07:03 46 *************************** 48 2021-02-26 07:04 50 ******************************* 49 2021-02-26 07:05 45 ************************** 50 2021-02-26 07:06 45 ************************** 51 2021-02-26 07:07 46 *************************** 52 2021-02-26 07:08 ? - 53 2021-02-26 07:09 ? - 54 2021-02-26 07:10 43 ************************ 55 2021-02-26 07:11 46 *************************** 56 2021-02-26 07:12 43 ************************ 57 2021-02-26 07:13 46 *************************** 58 2021-02-26 07:14 45 ************************** 59 2021-02-26 07:15 48 ***************************** 60 2021-02-26 07:16 46 *************************** 61 2021-02-26 07:17 46 *************************** 62 2021-02-26 07:18 48 ***************************** 63 2021-02-26 07:19 46 *************************** 64 2021-02-26 07:20 46 *************************** 65 2021-02-26 07:21 46 *************************** 66 2021-02-26 07:22 ? - ... ..( 3 skipped). .. - 70 2021-02-26 07:26 ? - 71 2021-02-26 07:27 38 ******************* 72 2021-02-26 07:28 43 ************************ 73 2021-02-26 07:29 45 ************************** ... ..( 2 skipped). .. ************************** 76 2021-02-26 07:32 45 ************************** 77 2021-02-26 07:33 46 *************************** 78 2021-02-26 07:34 46 *************************** 79 2021-02-26 07:35 ? - 80 2021-02-26 07:36 ? - 81 2021-02-26 07:37 46 *************************** ... ..( 4 skipped). .. *************************** 86 2021-02-26 07:42 46 *************************** 87 2021-02-26 07:43 51 ******************************** 88 2021-02-26 07:44 53 ********************************** 89 2021-02-26 07:45 ? - 90 2021-02-26 07:46 ? - 91 2021-02-26 07:47 38 ******************* 92 2021-02-26 07:48 ? - 93 2021-02-26 07:49 ? - 94 2021-02-26 07:50 33 ************** 95 2021-02-26 07:51 45 ************************** 96 2021-02-26 07:52 45 ************************** 97 2021-02-26 07:53 46 *************************** 98 2021-02-26 07:54 45 ************************** 99 2021-02-26 07:55 45 ************************** 100 2021-02-26 07:56 ? - 101 2021-02-26 07:57 ? - 102 2021-02-26 07:58 43 ************************ 103 2021-02-26 07:59 45 ************************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 182 --- Lifetime Power-On Resets 0x01 0x010 4 6016 --- Power-on Hours 0x01 0x018 6 2011441340 --- Logical Sectors Written 0x01 0x020 6 25803455 --- Number of Write Commands 0x01 0x028 6 739960833 --- Logical Sectors Read 0x01 0x030 6 15060921 --- Number of Read Commands 0x01 0x038 6 4294967296 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 103 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 45 --- Current Temperature 0x05 0x010 1 43 --- Average Short Term Temperature 0x05 0x018 1 43 --- Average Long Term Temperature 0x05 0x020 1 85 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 54 --- Highest Average Short Term Temperature 0x05 0x038 1 0 --- Lowest Average Short Term Temperature 0x05 0x040 1 47 --- Highest Average Long Term Temperature 0x05 0x048 1 0 --- Lowest Average Long Term Temperature 0x05 0x050 4 46 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2560 --- Number of Hardware Resets 0x06 0x010 4 799 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/ada2 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD10EFRX-68FYTN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Feb 26 07:59:18 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 136 134 021 - 4200 4 Start_Stop_Count -O--CK 100 100 000 - 180 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 089 089 000 - 8719 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 177 192 Power-Off_Retract_Count -O--CK 200 200 000 - 106 193 Load_Cycle_Count -O--CK 197 197 000 - 11638 194 Temperature_Celsius -O---K 113 091 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 28/30 Celsius Lifetime Min/Max Temperature: 16/52 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (185) Index Estimated Time Temperature Celsius 186 2021-02-26 00:02 29 ********** ... ..( 38 skipped). .. ********** 225 2021-02-26 00:41 29 ********** 226 2021-02-26 00:42 28 ********* ... ..( 3 skipped). .. ********* 230 2021-02-26 00:46 28 ********* 231 2021-02-26 00:47 29 ********** ... ..( 33 skipped). .. ********** 265 2021-02-26 01:21 29 ********** 266 2021-02-26 01:22 28 ********* ... ..( 13 skipped). .. ********* 280 2021-02-26 01:36 28 ********* 281 2021-02-26 01:37 29 ********** ... ..( 3 skipped). .. ********** 285 2021-02-26 01:41 29 ********** 286 2021-02-26 01:42 28 ********* ... ..( 3 skipped). .. ********* 290 2021-02-26 01:46 28 ********* 291 2021-02-26 01:47 29 ********** ... ..( 53 skipped). .. ********** 345 2021-02-26 02:41 29 ********** 346 2021-02-26 02:42 28 ********* ... ..( 3 skipped). .. ********* 350 2021-02-26 02:46 28 ********* 351 2021-02-26 02:47 29 ********** ... ..(169 skipped). .. ********** 43 2021-02-26 05:37 29 ********** 44 2021-02-26 05:38 28 ********* 45 2021-02-26 05:39 ? - 46 2021-02-26 05:40 29 ********** 47 2021-02-26 05:41 28 ********* ... ..( 3 skipped). .. ********* 51 2021-02-26 05:45 28 ********* 52 2021-02-26 05:46 29 ********** 53 2021-02-26 05:47 30 *********** ... ..( 9 skipped). .. *********** 63 2021-02-26 05:57 30 *********** 64 2021-02-26 05:58 29 ********** ... ..( 45 skipped). .. ********** 110 2021-02-26 06:44 29 ********** 111 2021-02-26 06:45 30 *********** 112 2021-02-26 06:46 30 *********** 113 2021-02-26 06:47 29 ********** ... ..( 71 skipped). .. ********** 185 2021-02-26 07:59 29 ********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 707 Vendor specific /dev/ada3 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: CT120BX100SSD1 Serial Number: -- LU WWN Device Id: 5 00a075 ... Firmware Version: MU02 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Feb 26 07:59:18 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: Input/output error Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 64 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 28/30 Celsius Lifetime Min/Max Temperature: 0/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (23) Index Estimated Time Temperature Celsius 24 2021-02-26 05:52 25 ****** 25 2021-02-26 05:53 29 ********** ... ..( 2 skipped). .. ********** 28 2021-02-26 05:56 29 ********** 29 2021-02-26 05:57 30 *********** ... ..( 7 skipped). .. *********** 37 2021-02-26 06:05 30 *********** 38 2021-02-26 06:06 31 ************ ... ..( 9 skipped). .. ************ 48 2021-02-26 06:16 31 ************ 49 2021-02-26 06:17 32 ************* ... ..( 2 skipped). .. ************* 52 2021-02-26 06:20 32 ************* 53 2021-02-26 06:21 30 *********** ... ..( 4 skipped). .. *********** 58 2021-02-26 06:26 30 *********** 59 2021-02-26 06:27 27 ******** 60 2021-02-26 06:28 23 **** 61 2021-02-26 06:29 24 ***** 62 2021-02-26 06:30 24 ***** 63 2021-02-26 06:31 29 ********** ... ..( 6 skipped). .. ********** 70 2021-02-26 06:38 29 ********** 71 2021-02-26 06:39 30 *********** ... ..( 5 skipped). .. *********** 77 2021-02-26 06:45 30 *********** 78 2021-02-26 06:46 35 **************** 79 2021-02-26 06:47 25 ****** 80 2021-02-26 06:48 25 ****** 81 2021-02-26 06:49 26 ******* 82 2021-02-26 06:50 30 *********** 83 2021-02-26 06:51 24 ***** 84 2021-02-26 06:52 25 ****** 85 2021-02-26 06:53 26 ******* 86 2021-02-26 06:54 30 *********** 87 2021-02-26 06:55 30 *********** 88 2021-02-26 06:56 30 *********** 89 2021-02-26 06:57 31 ************ ... ..( 4 skipped). .. ************ 94 2021-02-26 07:02 31 ************ 95 2021-02-26 07:03 32 ************* ... ..( 14 skipped). .. ************* 110 2021-02-26 07:18 32 ************* 111 2021-02-26 07:19 31 ************ 112 2021-02-26 07:20 31 ************ 113 2021-02-26 07:21 31 ************ 114 2021-02-26 07:22 37 ****************** ... ..( 5 skipped). .. ****************** 120 2021-02-26 07:28 37 ****************** 121 2021-02-26 07:29 26 ******* 122 2021-02-26 07:30 26 ******* 123 2021-02-26 07:31 28 ********* 124 2021-02-26 07:32 33 ************** 125 2021-02-26 07:33 22 *** 126 2021-02-26 07:34 23 **** 127 2021-02-26 07:35 23 **** 0 2021-02-26 07:36 24 ***** 1 2021-02-26 07:37 24 ***** 2 2021-02-26 07:38 24 ***** 3 2021-02-26 07:39 31 ************ 4 2021-02-26 07:40 31 ************ 5 2021-02-26 07:41 31 ************ 6 2021-02-26 07:42 29 ********** 7 2021-02-26 07:43 28 ********* 8 2021-02-26 07:44 28 ********* 9 2021-02-26 07:45 28 ********* 10 2021-02-26 07:46 30 *********** ... ..( 11 skipped). .. *********** 22 2021-02-26 07:58 30 *********** 23 2021-02-26 07:59 25 ****** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 217 --- Lifetime Power-On Resets 0x01 0x010 4 152 --- Power-on Hours 0x01 0x018 6 1306817002 --- Logical Sectors Written 0x01 0x020 6 17213128 --- Number of Write Commands 0x01 0x028 6 171198958 --- Logical Sectors Read 0x01 0x030 6 3518863 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 61 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2597 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC